1. Preface¶
1.1. Who Should Use This Guide¶
EXPRESSCLUSTER® X Command Reference Guide for Cluster Configuration is intended for system engineers who introduce EXPRESSCLUSTER-based cluster systems, and system administrators who maintain and operate the introduced cluster systems. The guide describes how to create clp.conf (a cluster configuration data file) by using command lines.
1.2. How This Guide is Organized¶
2. Command reference : Provides an overview of commands for creating cluster configuration data.
3. Creating a cluster : Describes the procedure for creating clusters.
4. Setting cluster properties : Describes the procedure for setting cluster properties.
5. Configuring a server : Describes the procedure for configuring servers.
6. Configuring a group : Describes the procedure for configuring groups.
7. Configuring group resources : Describes the procedure for configuring group resources.
8. Configuring monitor resources : Describes the procedure for configuring monitor resources.
9. Retrieving an encrypted password string : Describes the procedure for getting an encrypted string necessary for setting a password.
1.3. EXPRESSCLUSTER X Documentation Set¶
The EXPRESSCLUSTER X manuals consist of the following four guides. The title and purpose of each guide is described below:
EXPRESSCLUSTER X Getting Started Guide
This guide is intended for all users. The guide covers topics such as product overview, system requirements, and known problems.
EXPRESSCLUSTER X Installation and Configuration Guide
This guide is intended for system engineers and administrators who want to build, operate, and maintain a cluster system. Instructions for designing, installing, and configuring a cluster system with EXPRESSCLUSTER are covered in this guide.
EXPRESSCLUSTER X Reference Guide
This guide is intended for system administrators. The guide covers topics such as how to operate EXPRESSCLUSTER, function of each module and troubleshooting. The guide is supplement to the Installation and Configuration Guide.
EXPRESSCLUSTER X Maintenance Guide
This guide is intended for administrators and for system administrators who want to build, operate, and maintain EXPRESSCLUSTER-based cluster systems. The guide describes maintenance-related topics for EXPRESSCLUSTER.
1.4. Conventions¶
In this guide, Note, Important, See also are used as follows:
Note
Used when the information given is important, but not related to the data loss and damage to the system and machine.
Important
Used when the information given is necessary to avoid the data loss and damage to the system and machine.
See also
Used to describe the location of the information given at the reference destination.
The following conventions are used in this guide.
Convention |
Usage |
Example |
|---|---|---|
italic |
Indicates that users should replace italicized part with values that they are actually working with. |
|
1.5. Contacting NEC¶
For the latest product information, visit our website below:
2. Command reference¶
2.1. clpcfadm.py command¶
This command generates clp.conf, a cluster configuration data file.
-
Command line clpcfadm.py {create} clustername charset [-e encode] [-s serveros]
clpcfadm.py {add} srv servername priority
clpcfadm.py {add} hba servername id portnumber deviceid instanceid
clpcfadm.py {add} device servername type id info [extend]
clpcfadm.py {add} forcestop env
clpcfadm.py {add} hb lankhb deviceid priority
clpcfadm.py {add} hb witnesshb deviceid priority host
clpcfadm.py {add} np disknp deviceid priority extend
clpcfadm.py {add} np pingnp deviceid priority groupid listid ipaddress
clpcfadm.py {add} np httpnp deviceid priority [--host host]
clpcfadm.py {add} np majonp deviceid priority
clpcfadm.py {add} grp grouptype groupname
clpcfadm.py {add} rsc groupname resourcetype resourcename
clpcfadm.py {add} rscdep resourcetype resourcename dependresourcename
clpcfadm.py {add} mon monitortype resourcename
clpcfadm.py {del} srv servername
clpcfadm.py {del} hba servername id
clpcfadm.py {del} device servername id
clpcfadm.py {del} forcestop
clpcfadm.py {del} hb lankhb deviceid
clpcfadm.py {del} hb witnesshb deviceid
clpcfadm.py {del} np disknp deviceid
clpcfadm.py {del} np pingnp deviceid
clpcfadm.py {del} np httpnp deviceid
clpcfadm.py {del} np majonp deviceid
clpcfadm.py {del} grp groupname
clpcfadm.py {del} rsc groupname resourcetype resourcename
clpcfadm.py {del} rscdep resourcetype resourcename
clpcfadm.py {del} mon monitortype resourcename
clpcfadm.py {mod} -t [tagname] [--set parameter] [--delete] [--nocheck]
-
Option - --backup
- This option can be used with any of the above command lines.Using this option allows you to create clp.conf.bak (a backup of clp.conf before command execution) in the current directory.If clp.conf.bak already exists in the current directory, executing a command with this option overwrites the file.
Note
Not existing in the current directory, clp.conf.bak is created by executing a command with or without this option.
-
Return value 0
Success
Other than 0
Failure
-
System requirements Software
Version
Remarks
Python
3.6.8 or later
-
Notes Run the command as an administrator.
Run the command with clp.conf placed in the current directory.
- This command generates only clp.conf among cluster configuration data files.You must manually create script files for such resources as script resources and custom monitor resources.
- Example
For placing script files of a script resource (script1) belonging to a failover group (failover1), and of a custom monitor resource (genw1)
scripts +--failover1 | +--script1 | start.bat | stop.bat | +--monitor.s +--genw1 genw.bat
- This command does not automatically add monitor resources which are automatically added by adding group resources through Cluster WebUI or Cluster WebUI Offline.To add the monitor resources, see "Monitor resource that must be added" of the following table:
Group resource
Monitor resource that must be added
Application resource
Application monitor resource
AWS DNS resource
AWS AZ monitor resource
AWS Elastic IP resource
AWS Elastic IP monitor resource
AWS Virtual IP resource
AWS Virtual IP monitor resource
Azure DNS resource
Azure DNS monitor resource
Azure probe port resource
Azure load balance monitor resourceAzure probe port monitor resourceCIFS resource
CIFS monitor resource
Dynamic DNS resource
Dynamic DNS monitor resource
Floating IP resource
Floating IP monitor resource
Google Cloud Virtual IP resource
Google Cloud load balance monitor resourceGoogle Cloud Virtual IP monitor resourceHybrid disk resource
Hybrid disk TUR monitor resourceHybrid disk monitor resourceMirror disk resource
Mirror disk monitor resource
Oracle Cloud DNS resource
Oracle Cloud DNS monitor resource
Oracle Cloud Virtual IP resource
Oracle Cloud load balance monitor resourceOracle Cloud Virtual IP monitor resourceRegistry synchronization resource
Registry synchronization monitor resource
Disk resource
Disk TUR monitor resource
Service resource
Service monitor resource
Virtual computer name resource
Virtual computer name monitor resource
Virtual IP resource
Virtual IP monitor resource
To apply the cluster configuration data file to an operating cluster, run the clpcfctrl command.
-
Error Messages Message
Cause/Solution
Log in as Administrator.
Run the command as an administrator.
'%1' is not found.
The file (%1) is not found.
The specified object does not exist. '%1'
The specified object (%1) does not exist.
The specified element '%1' does not exist in '%2'.
The specified element (%1) does not exist in %2.
The specified path does not exist in a config file.
The specified path is not included in the cluster configuration data.
Invalid config file. Use the 'create' option.
Execute this command with the create option.
The config file already exists.
The cluster configuration data already exists.
Non-configurable elements specified.
The tag name cannot be specified.
Invalid value specified. Specify as follows: <resource type>@<resource name>
Specify a value in the form of <type of group resource>@<name of group resource>.
Invalid path specified.
The specified path is invalid.
Cannot register a '%1' any more.
%1 has already reached the upper limit of registration.
The following arguments are required :%1
Specify %1.
Argument %1: allowed only with argument '%2'
The %1 option is effective only with %2.
Argument %1: invalid choice: '%2' (choose from %3)
%2 specified in %1 is invalid. Choose a value from %3.
Argument %1: invalid value: '%2' (The value must be in the range [%3, %4])
%2 specified in %1 is invalid. Specify a numeric value between %3 and %4.
Argument %1: invalid value: '%2' (The length must be less than %3)
%2 specified in %1 is too long in the string. Shorten it to less than %3.
Argument %1: '%2' already exists.
%2 already exists in %1.
Argument %1: '%2' does not exist.
%2 does not exist in %1.
Argument %1: cannot specify a dependency to the same object.
%1 specifies dependency on the same object. Specify a different object.
Argument %1: does not appear to be an IPv4.
%1 is invalid. Specify it in IPv4 format.
Invalid value: '%1' (The value must be greater than 0)
%1 is invalid. Specify a numeric value greater than 0.
2.2. clpencrypt command¶
Encrypts a character string.
-
Command line clpencrypt <password (plaintext)>
-
Return value 0
Success
Other than 0
Failure
-
Example of Execution Encrypt a password string.
Execute: clpencrypt <password (plaintext)> Output: <Encrypted password>
Execution example: clpencrypt password Output example: 20220001111abaabdbb35c04
-
Error Messages Message
Cause/Solution
Invalid parameter.
The parameter is invalid. Check if there is any error in its format or parameter.
2.3. clpdiskctrl command¶
This command sets or gets a GUID of or HBA information on a drive.
-
Command line clpdiskctrl {set|--set} filter <Drive letter> clpdiskctrl {get|--get} guid <Drive letter> clpdiskctrl {get|--get} hda <Drive letter>
-
Return value 0
Success
Other than 0
Failure
-
Example of Execution Set an HBA filter by specifying the drive.
Execute: clpdiskctrl set filter <Drive letter> Output: Command succeeded.
Execution example: clpdiskctrl set filter R:\ Output example: Command succeeded.
Get a GUID by specifying the drive.
Execute: clpdiskctrl get guid <Drive letter> Output: <GUID>
Execution example: clpdiskctrl get guid R:\ Output example: b7131c40-1f5a-46d0-ab51-57af15478ba3
Get HBA information by specifying the drive.
Execute: clpdiskctrl get hba <Drive letter> Output: <Port Number> <HBA device ID> <HBA instance ID>
Execution example: clpdiskctrl get hba R:\ Output example: 4 ROOT\ISCSIPRT 0000
-
Notes Run the command as an administrator.
-
Error Messages Message
Cause/Solution
Log in as Administrator.
Run the command as an administrator.
Invalid parameter.
The parameter is invalid. Check if there is any error in its format or parameter.
Drive not found.
The specified drive is not found. Check if you have specified the right drive.
Device no info.
Failed to obtain the device data. Check if the disk functions normally.
Specify the data drive.
Specify other than the Windows system drive (usually C:).
Failed to set filter.
Failed to set the filter.
Internal error.
Check if the memory or OS resource is sufficient.
3. Creating a cluster¶
Be sure to set the following items. For details, see "Setting cluster properties".
Item (mandatory)
Cluster name
Language
Server settings 1
Interconnect settings 2
Monitor resource (user mode monitor) settings 3
# Create a cluster clpcfadm.py create <Cluster name> <Language> # Add a server clpcfadm.py add srv <Server name> <Priority> # Add an interconnect (kernel mode) clpcfadm.py add hb lankhb <Device ID> <Priority> clpcfadm.py add device <Server name> lan <Device ID> <IP Address> # Add a monitor resource (user mode monitor: keepalive) clpcfadm.py add mon userw userw clpcfadm.py mod -t monitor/userw@userw/target --set "" 4 clpcfadm.py mod -t monitor/userw@userw/relation/name --set LocalServer --nocheck clpcfadm.py mod -t monitor/userw@userw/relation/type --set cls --nocheck
- 1
For details, see "Adding a server".
- 2
For details, see "Interconnect".
- 3
For details, see "Adding a user mode monitor resource".
- 4
Note
In the path of a user mode monitor resource, always set an empty value.
Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
4. Setting cluster properties¶
4.1. Basic information¶
Cluster name (Within 31 bytes)
clpcfadm.py mod -t cluster/name --set <Cluster name>
Comment (Within 127 bytes)
clpcfadm.py mod -t cluster/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
Language
Language
Value
English
ASCII
Japanese
SJIS
Chinese
GB2312
clpcfadm.py mod -t all/charset --set <Value>
4.2. Interconnect¶
-
Heartbeat I/F -
Add Important
Set at least one LAN heartbeat (kernel mode).
Note
With only one heartbeat interface, specify 0 for Priority.With more than one heartbeat interface, specify consecutive numbers (e.g., 0, 1, 2...).-
Kernel mode clpcfadm.py add hb lankhb <Device ID> <Priority> clpcfadm.py add device <Server name> lan <Device ID> <IP Address>
Note
With only one LAN heartbeat (kernel mode), specify 0 for Device ID.With more than one LAN heartbeat (kernel mode), specify consecutive numbers (e.g., 0, 1, 2...).
-
Witness clpcfadm.py add hb witnesshb <Witness device ID> <Priority> <IP Address : Port Number> clpcfadm.py add device <Server name> witness <Device ID> <Use/Not use> <IP Address : Port Number>
Note
Set Use/Not use to 1(if you use the device) or 0 (if not).
Note
With only one Witness, specify 0 for Witness Device ID.With more than one Witness, specify consecutive numbers (e.g., 0, 1, 2...).Use SSL
Use SSL
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t heartbeat/witnesshb@witnesshb1/ssl/use --set <Value>
Use Proxy
Use Proxy
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t heartbeat/witnesshb@witnesshb1/proxy/use --set <Value>
HTTP Timeout (sec)
Default, 10 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t heartbeat/witnesshb@witnesshb1/http_timeout --set <Value>
-
MDC To configure an MDC, which is dedicated to mirroring communication, set as follows:
clpcfadm.py add device <Server name> mdc <Device ID> <IP Address>
Note
With only one MDC, specify 0 for Device ID.With more than one MDC, specify consecutive numbers (e.g., 0, 1, 2...).
-
-
Delete -
Kernel mode clpcfadm.py del hb lankhb <Device ID> clpcfadm.py del device <Server name> <Device ID>
-
Witness clpcfadm.py del hb witnesshb <Device ID> clpcfadm.py del device <Server name> <Device ID>
Important
For Device ID, specify the total of the following: 700 + the value specified in "Add" in this section.
# Add clpcfadm.py add hb witnesshb 0 <Priority> clpcfadm.py add device <Server name> witness 0 <Use/Not use> <Target IP address : Port Number> # Delete clpcfadm.py del hb witnesshb 700 clpcfadm.py del device <Server name> 700
-
MDC To delete an MDC, which is dedicated to mirroring communication, set as follows:
clpcfadm.py del device <Server name> <Device ID>
Important
For Device ID, specify the total of the following: 400 + the value specified in "Add" in this section
# Add clpcfadm.py add device <Server name> mdc 0 <IP Address> # Delete clpcfadm.py del device <Server name> 400
-
-
-
Server Down Notification Server Down Notification
Server Down Notification
Value
Notify (default)
1
Do not notify
0
clpcfadm.py mod -t cluster/downnotify --set <Value>
-
Detailed Settings (Server Down Notification) Server Reset Notification
Server Reset Notification
Value
Notify
1
Do not notify (default)
0
clpcfadm.py mod -t cluster/dyingnotify/use --set <Value>
Note
Set as above with "Server Down Notification" set to "Notify".
Execute Server Alive Check
Execute Server Alive Check
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t cluster/dyingnotify/precheck/use --set <Value>
Note
Set as above with "Server Reset Notification" set to "Notify".
Timeout (sec)
Default, 1 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t cluster/dyingnotify/precheck/ping/timeout --set <Value>
Note
Set as above with "Execute Server Alive Check" set to "Check".
-
4.3. Fencing¶
4.3.1. NP resolution¶
-
Add Note
With only one NP resolution, specify 0 for Priority.With more than one NP resolution, specify consecutive numbers (e.g., 0, 1, 2...).-
DISK clpcfadm.py add np disknp <Device ID> <Priority> clpcfadm.py add device <Server name> disknp <Device ID> <Volume ID> <Device path>
Note
With only one NP resolution (DISK), specify 0 for Device ID.With more than one NP resolution (DISK), specify consecutive numbers (e.g., 0, 1, 2...).IO Wait Time (sec)
Default, 80 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t networkpartition/disknp@<disknp name(disknp1)>/iotimeout --set <Value>
-
Monitor Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t networkpartition/disknp@<disknp name(disknp1)>/interval --set <Value>
Timeout (sec)
Default, 300 (minimum, 5; maximum, 999)
clpcfadm.py mod -t networkpartition/disknp@<disknp name(disknp1)>/timeout --set <Value>
Retry Count
Default, 0 (minimum, 0; maximum, 999)
clpcfadm.py mod -t networkpartition/disknp@<disknp name(disknp1)>/count --set <Value>
-
Ping clpcfset add np pingnp <Device ID> <Priority> <Group ID> <List ID> <IP Address> clpcfadm.py add device <Server name> ping <Device ID> <Use/Not use>
Note
Set Use/Not use to 1(if you use the device) or 0 (if not).
Note
With only one NP resolution (Ping), specify 0 for Device ID.With more than one NP resolution (Ping), specify consecutive numbers (e.g., 0, 1, 2...).Note
With only one group, specify 0 for Group ID.With more than one group, specify consecutive numbers (e.g., 0, 1, 2...).Note
With only one IP address in the same group, specify 0 for List ID.With more than one IP address in the same group, specify consecutive numbers (e.g., 0, 1, 2...).-
Detailed Settings Note
Specify the value of a heartbeat timeout to satisfy the following inequality:
Heartbeat timeout > Ping NP interval x Ping NP retry count + Ping NP timeout
Interval (sec)
Default, 5 (minimum, 2; maximum, 999)
clpcfadm.py mod -t networkpartition/pingnp@<pingnp name(pingnp1)>/interval --set <Value>
Timeout (sec)
Default, 3 (minimum, 1; maximum, 999)
clpcfadm.py mod -t networkpartition/pingnp@<pingnp name(pingnp1)>/timeout --set <Value>
Retry Count
Default, 3 (minimum, 1; maximum, 999)
clpcfadm.py mod -t networkpartition/pingnp@<pingnp name(pingnp1)>/count --set <Value>
-
-
HTTP clpcfadm.py add np httpnp <Device ID> <Priority> --host <IP Address : Port Number> clpcfadm.py add device <Server name> http <Device ID> <Use/Not use>
Note
Set Use/Not use to 1(if you use the device) or 0 (if not).
Note
With only one NP resolution (HTTP), specify 0 for Device ID.With more than one NP resolution (HTTP), specify consecutive numbers (e.g., 0, 1, 2...).Note
To use Witness HB resource settings, set as follows:
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/witnesshb/use --set 1
Target Host (Within 255 bytes)
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/host --set <Target Host>
Request URI (Within 1023 bytes)
Default: /
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/requesturi --set <Request URI>
Service Port
Default, 80 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/port --set <Value>
Use SSL
Use SSL
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/ssl/use --set <Value>
Use Proxy
Use Proxy
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/proxy/use --set <Value>
Interval (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/interval --set <Value>
Timeout (sec)
Default, 20 (minimum, 1; maximum, 99)
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/timeout --set <Value>
HTTP Timeout (sec)
Default, 10 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t networkpartition/httpnp@<httpnp name(httpnp1)>/http_timeout --set <Value>
-
Majority clpcfadm.py add np majonp <Device ID> <Priority> clpcfadm.py add device <Server name> majo <Device ID> <Use/Not use>
Note
Set Use/Not use to 1(if you use the device) or 0 (if not).
Note
With only one NP resolution (majority method), specify 0 for Device ID.With more than one NP resolution (majority method), specify consecutive numbers (e.g., 0, 1, 2...).
-
-
Delete -
DISK clpcfadm.py del np disknp <Device ID> clpcfadm.py del device <Server name> <Device ID>
Important
For Device ID, specify the total of the following: 10100 + the value specified in "Add" in this section.
# Add clpcfadm.py add np disknp 0 <Priority> clpcfadm.py add device <Server name> disknp 0 <Volume ID> <Device path> # Delete clpcfadm.py del np disknp 10100 clpcfadm.py del device <Server name> 10100
-
Ping clpcfadm.py del np pingnp <Device ID> clpcfadm.py del device <Server name> <Device ID>
Important
For Device ID, specify the total of the following: 10200 + the value specified in "Add" in this section.
# Add clpcfadm.py add np pingnp 0 <Priority> <Group ID> <List ID> <IP Address> clpcfadm.py add device <Server name> ping 0 <Use/Not use> # Delete clpcfadm.py del np pingnp 10200 clpcfadm.py del device <Server name> 10200
-
HTTP clpcfadm.py del np httpnp <Device ID> clpcfadm.py del device <Server name> <Device ID>
Important
For Device ID, specify the total of the following: 10700 + the value specified in "Add" in this section.
# Add clpcfadm.py add np httpnp 0 <Priority> clpcfadm.py add device <Server name> http 0 <Use/Not use> # Delete clpcfadm.py del np httpnp 10700 clpcfadm.py del device <Server name> 10700
-
Majority clpcfadm.py del np majonp <Device ID> clpcfadm.py del device <Server name> <Device ID>
Important
For Device ID, specify the total of the following: 10300 + the value specified in "Add" in this section.
# Add clpcfadm.py add np majonp 0 <Priority> clpcfadm.py add device <Server name> majo 0 <Use/Not use> # Delete clpcfadm.py del np majonp 10300 clpcfadm.py del device <Server name> 10300
-
-
Tuning Action at NP Occurrence
Action at NP Occurrence
Value
Stop the cluster service
1
Stop the cluster service and shutdown OS
3
Stop the cluster service and reboot OS
4
Emergency shutdown (default)
2
Generate an intentional stop error
5
Reset the hardware
6
clpcfadm.py mod -t cluster/networkpartition/npaction --set <Value>
4.3.2. Forced stop¶
Note
For a forced-stop configuration, configure two or more servers.
-
Add -
BMC clpcfadm.py add forcestop bmc clpcfadm.py mod -t forcestop/bmc/server@<Server name>/parameters/ip --set <IP Address> --nocheck clpcfadm.py mod -t forcestop/bmc/server@<Server name>/parameters/user --set <User Name> --nocheck clpcfadm.py mod -t forcestop/bmc/server@<Server name>/parameters/password --set <Encrypted password> --nocheck clpcfadm.py mod -t forcestop/bmc/server@<Server name>/use --set 1 --nocheck
-
Server List IP Address
clpcfadm.py mod -t forcestop/bmc/server@<Server name>/parameters/ip --set <IP Address> --nocheck
User Name (Within 255 bytes)
clpcfadm.py mod -t forcestop/bmc/server@<Server name>/parameters/user --set <User Name> --nocheck
Password (Within 255 bytes)
clpcfadm.py mod -t forcestop/bmc/server@<Server name>/parameters/password --set <Encrypted password> --nocheck
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
-
Forced Stop Forced Stop Action
Forced Stop Action
Value
BMC Power Off (default)
poweroff
BMC Power Cycle
powercycle
BMC Reset
reset
BMC NMI
nmi
clpcfadm.py mod -t forcestop/bmc/parameters/action --set <Value>
Forced Stop Timeout (sec)
Default, 15 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/bmc/exec/timeout --set <Value>
Time to Wait for Stop to Be Completed (sec)
Default, 15 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/bmc/wait/timeout --set <Value>
Note
Set as above with "Forced Stop Action" set to "BMC Power Off".
Lead Time between a Stop Request and a Failover Start (sec)
Default, 15 (minimum, 0; maximum, 999)
clpcfadm.py mod -t forcestop/bmc/wait/fodelay --set <Value>
Note
Set as above with "Forced Stop Action" set to "BMC Power Cycle", "BMC Reset", or "BMC NMI".
Disable Group Failover When Execution Fails
Disable Group Failover When Execution Fails
Value
Suppress
1
Do not suppress (default)
0
clpcfadm.py mod -t forcestop/bmc/suppression --set <Value>
-
-
vCenter clpcfadm.py add forcestop vcenter clpcfadm.py mod -t forcestop/vcenter/parameters/ip --set <Host Name> --nocheck clpcfadm.py mod -t forcestop/vcenter/parameters/user --set <User Name> --nocheck clpcfadm.py mod -t forcestop/vcenter/parameters/password --set <Encrypted password> --nocheck clpcfadm.py mod -t forcestop/vcenter/parameters/method --set <Method of performing forced stop> clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/vmname --set <Virtual Machine Name> --nocheck clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/datacenter --set <Data Center> --nocheck clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/commandpath --set "" --nocheck clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/perlpath --set "" --nocheck clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/use --set 1 --nocheck
-
Server List Virtual Machine Name (Within 80 bytes)
clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/vmname --set <Virtual Machine Name> --nocheck
Data Center (Within 80 bytes)
clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/datacenter --set <Data Center> --nocheck
-
Forced Stop Forced Stop Action
Forced Stop Action
Value
Power Off (default)
poweroff
Reset
reset
clpcfadm.py mod -t forcestop/vcenter/parameters/action --set <Value>
Forced Stop Timeout (sec)
Default, 10 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/vcenter/exec/timeout --set <Value>
Time to Wait for Stop to Be Completed (sec)
Default, 10 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/vcenter/wait/timeout --set <Value>
Note
Set as above with "Forced Stop Action" set to "Power Off".
Lead Time between a Stop Request and a Failover Start (sec)
Default, 10 (minimum, 0; maximum, 999)
clpcfadm.py mod -t forcestop/vcenter/wait/fodelay --set <Value>
Note
Set as above with "Forced Stop Action" set to "Reset".
Disable Group Failover When Execution Fails
Disable Group Failover When Execution Fails
Value
Suppress
1
Do not suppress (default)
0
clpcfadm.py mod -t forcestop/vcenter/suppression --set <Value>
-
vCenter Method of performing forced stop
Method of performing forced stop
Value
vSphere Automation API (default)
restapi
VMware vSphere CLI
vcli
clpcfadm.py mod -t forcestop/vcenter/parameters/method --set <Value>
VMware vSphere CLI Installation Path (Within 1023 bytes)
VMware vSphere CLI Installation Path
C:\Program Files (x86)\VMware\VMware vSphere CLI
C:\Program Files\VMware\VMware vSphere CLI
clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/commandpath --set <VMware vSphere CLI Installation Path> --nocheck
Note
With "Method of performing forced stop" set to "vSphere Automation API", always set an empty value.
Note
Set the same path for all target servers.
Note
Set it according to the environment (e.g., installation folder).
Host Name (Within 255 bytes)
clpcfadm.py mod -t forcestop/vcenter/parameters/ip --set <Host Name> --nocheck
User Name (Within 255 bytes)
clpcfadm.py mod -t forcestop/vcenter/parameters/user --set <User Name> --nocheck
Password (Within 255 bytes)
clpcfadm.py mod -t forcestop/vcenter/parameters/password --set <Encrypted password> --nocheck
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Perl Path (Within 255 bytes)
clpcfadm.py mod -t forcestop/vcenter/server@<Server name>/parameters/perlpath --set <Perl Path> --nocheck
Note
Set as above with "Method of performing forced stop" set to "VMware vSphere CLI".
-
-
AWS clpcfadm.py add forcestop aws clpcfadm.py mod -t forcestop/aws/server@<Server name>/parameters/id --set <Instance ID> --nocheck clpcfadm.py mod -t forcestop/aws/server@<Server name>/use --set 1 --nocheck
-
Server List Instance ID (Within 31 bytes)
clpcfadm.py mod -t forcestop/aws/server@<Server name>/parameters/id --set <Instance ID> --nocheck
-
Forced Stop Forced Stop Action
Value
stop (default)
reboot
clpcfadm.py mod -t forcestop/aws/parameters/action --set <Value>
Forced Stop Timeout (sec)
Default, 10 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/aws/exec/timeout --set <Value>
Time to Wait for Stop to Be Completed (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/aws/wait/timeout --set <Value>
Note
Set as above with "Forced Stop Action" set to "stop".
Lead Time between a Stop Request and a Failover Start (sec)
Default, 120 (minimum, 0; maximum, 999)
clpcfadm.py mod -t forcestop/aws/wait/fodelay --set <Value>
Note
Set as above with "Forced Stop Action" set to "reboot".
Disable Group Failover When Execution Fails
Disable Group Failover When Execution Fails
Value
Suppress
1
Do not suppress (default)
0
clpcfadm.py mod -t forcestop/aws/suppression --set <Value>
-
-
Azure clpcfadm.py add forcestop azure clpcfadm.py mod -t forcestop/azure/parameters/useruri --set <User URI> --nocheck clpcfadm.py mod -t forcestop/azure/parameters/tenantid --set <Tenant ID> --nocheck clpcfadm.py mod -t forcestop/azure/parameters/certfile --set <File Path of Service Principal> --nocheck clpcfadm.py mod -t forcestop/azure/parameters/rscgrp --set <Resource Group Name> --nocheck clpcfadm.py mod -t forcestop/azure/server@<Server name>/parameters/vmname --set <Virtual Machine Name> --nocheck clpcfadm.py mod -t forcestop/azure/server@<Server name>/use --set 1 --nocheck
-
Server List Virtual Machine Name (Within 31 bytes)
clpcfadm.py mod -t forcestop/azure/server@<Server name>/parameters/vmname --set <Virtual Machine Name> --nocheck
-
Forced Stop Forced Stop Action
Value
stop and deallocate (default)
stop only
reboot
clpcfadm.py mod -t forcestop/azure/parameters/action --set <Value>
Forced Stop Timeout (sec)
Default, 15 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/azure/exec/timeout --set <Value>
Time to Wait for Stop to Be Completed (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/azure/wait/timeout --set <Value>
Note
Set as above with "Forced Stop Action" set to "stop".
Lead Time between a Stop Request and a Failover Start (sec)
Default, 120 (minimum, 0; maximum, 999)
clpcfadm.py mod -t forcestop/azure/wait/fodelay --set <Value>
Note
Set as above with "Forced Stop Action" set to "reboot".
Disable Group Failover When Execution Fails
Disable Group Failover When Execution Fails
Value
Suppress
1
Do not suppress (default)
0
clpcfadm.py mod -t forcestop/azure/suppression --set <Value>
-
Azure User URI (Within 2048 bytes)
clpcfadm.py mod -t forcestop/azure/parameters/useruri --set <User URI> --nocheck
Tenant ID (Within 36 bytes)
clpcfadm.py mod -t forcestop/azure/parameters/tenantid --set <Tenant ID> --nocheck
File Path of Service Principal (Within 1024 bytes)
clpcfadm.py mod -t forcestop/azure/parameters/certfile --set <File Path of Service Principal> --nocheck
Resource Group Name (Within 90 bytes)
clpcfadm.py mod -t forcestop/azure/parameters/rscgrp --set <Resource Group Name> --nocheck
-
-
OCI clpcfadm.py add forcestop oci clpcfadm.py mod -t forcestop/oci/server@<Server name>/parameters/id --set <Instance ID> --nocheck clpcfadm.py mod -t forcestop/oci/server@<Server name>/use --set 1 --nocheck
-
Server List Instance ID (Within 31 bytes)
clpcfadm.py mod -t forcestop/oci/server@<Server name>/parameters/id --set <Instance ID> --nocheck
-
Forced Stop Forced Stop Action
Value
stop (default)
reboot
clpcfadm.py mod -t forcestop/oci/parameters/action --set <Value>
Forced Stop Timeout (sec)
Default, 15 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/oci/exec/timeout --set <Value>
Time to Wait for Stop to Be Completed (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/oci/wait/timeout --set <Value>
Note
Set as above with "Forced Stop Action" set to "stop".
Lead Time between a Stop Request and a Failover Start (sec)
Default, 120 (minimum, 0; maximum, 999)
clpcfadm.py mod -t forcestop/oci/wait/fodelay --set <Value>
Note
Set as above with "Forced Stop Action" set to "reboot".
Disable Group Failover When Execution Fails
Disable Group Failover When Execution Fails
Value
Suppress
1
Do not suppress (default)
0
clpcfadm.py mod -t forcestop/oci/suppression --set <Value>
-
-
Custom clpcfadm.py add forcestop custom clpcfadm.py mod -t forcestop/custom/parameters/path --set forcestop.bat clpcfadm.py mod -t forcestop/custom/parameters/account --set "" --nocheck clpcfadm.py mod -t forcestop/custom/server@<Server name>/use --set 1 --nocheck
-
Forced Stop Forced Stop Timeout (sec)
Default, 10 (minimum, 5; maximum, 999)
clpcfadm.py mod -t forcestop/custom/exec/timeout --set <Value>
Disable Group Failover When Execution Fails
Disable Group Failover When Execution Fails
Value
Suppress
1
Do not suppress (default)
0
clpcfadm.py mod -t forcestop/custom/suppression --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t forcestop/custom/parameters/default --set <Value>
Note
If you change this parameter, change "Path".
Path (Within 1023 bytes)
clpcfadm.py mod -t forcestop/custom/parameters/path --set <Path>
Note
If you specify "Script created with this product", specify forcestop.bat.
clpcfadm.py mod -t forcestop/custom/parameters/path --set forcestop.bat
Exec User
clpcfadm.py mod -t forcestop/custom/parameters/account --set <Exec User>
-
-
-
Delete (Do Not Use) clpcfadm.py del forcestop
4.4. Timeout¶
Service Startup Delay Time (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t cluster/startupdelay --set <Value>
Network initialization complete wait time (sec)
Default, 180 (minimum, 0; maximum, 5940)
clpcfadm.py mod -t cluster/networkcheck --set <Value>
Note
Specify a value in seconds (divisible by 60).
Server Sync Wait Time (sec)
Default, 300 (minimum, 0; maximum, 5940)
clpcfadm.py mod -t cluster/bootwait --set <Value>
Note
Specify a value in seconds (divisible by 60).
-
Heartbeat Interval (msec)
Default, 3000 (minimum, 1000; maximum, 99000)
clpcfadm.py mod -t cluster/heartbeat/interval --set <Value>
Note
Specify a value in milliseconds (divisible by 1000).
Timeout (msec)
Default, 30000 (minimum, 2000; maximum, 999000)
clpcfadm.py mod -t cluster/heartbeat/timeout --set <Value>
Note
Specify a value in milliseconds (divisible by 1000).
Server Internal Timeout (sec)
Default, 180 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t cluster/api/timeout --set <Value>
4.5. Port No.¶
-
TCP Server Internal Port Number
Default, 29001 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/api/port --set <Value>
Information Base Port Number
Default, 29008 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/api/ibport --set <Value>
Data Transfer Port Number
Default, 29002 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/trns/port --set <Value>
WebManager HTTP Port Number
Default, 29003 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t webmgr/http/port --set <Value>
API HTTP Port Number
Default, 29009 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/rstd/http/port --set <Value>
API Server Internal Port Number
Default, 29010 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/rstd/service/port --set <Value>
Disk Agent Port Number
Default, 29004 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t diskagent/port --set <Value> --nocheck
Mirror Driver Port Number
Default, 29005 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t diskfltr/port --set <Value> --nocheck
-
UDP Kernel Mode Heartbeat Port Number
Default, 29106 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/heartbeat/khbport/recv --set <Value>
Alert Sync Port Number
Default, 29003 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t webalert/daemon/udpport --set <Value>
4.6. Recovery¶
Action When the Cluster Service Process Is Failure
Action When the Cluster Service Process Is Failure
Value
Emergency shutdown (default)
5
Generate an intentional stop error
6
Reset the hardware
7
clpcfadm.py mod -t pm/exec0/recover --set <Value> clpcfadm.py mod -t pm/exec1/recover --set <Value> --nocheck
Note
Set each of the <Value> fields to the same value.
-
Recovery Action for HA Agents Max Restart Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t rm/agent/retrynum --set <Value>
Recovery Action over Max Restart Count
Recovery Action over Max Restart Count
Value
No operation (default)
1
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
clpcfadm.py mod -t rm/agent/action --set <Value>
Action at Group Resource Activation or Deactivation Stall
Action at Group Resource Activation or Deactivation Stall
Value
Emergency shutdown (default)
5
Generate an intentional stop error
6
No operation (operates as an activity or deactivity failure)
0
clpcfadm.py mod -t cluster/rsctimeout/rsctoaction --set <Value>
-
Disable the Final Action when OS Stops Due to Failure Detection Group Resource When Activation Failure Detected
Final Action When OS Stops Due to All Server Shutdown
Value
Perform the final action
1
Do not perform the final action (default)
0
clpcfadm.py mod -t cluster/survive/rscact --set <Value>
Group Resource When Deactivation Failure Detected
Final Action When OS Stops Due to All Server Shutdown
Value
Perform the final action
1
Do not perform the final action (default)
0
clpcfadm.py mod -t cluster/survive/rscdeact --set <Value>
Monitor Resource When Failure Detected
Final Action When OS Stops Due to All Server Shutdown
Value
Perform the final action
1
Do not perform the final action (default)
0
clpcfadm.py mod -t cluster/survive/monitor --set <Value>
-
Disable Shutdown When Multi-Failover-Service Detected Server Group Survives When Multi-Failover-Service Detected
Server Group Survives When Multi-Failover-Service Detected
Value
Shut down (default)
0
Do not shut down
1
clpcfadm.py mod -t servergroup@<Server group name>/survive --set <Value>
Server Survives When Multi-Failover-Service Detected
Server Survives When Multi-Failover-Service Detected
Value
Shut down (default)
0
Do not shut down
1
clpcfadm.py mod -t server@<Server name>/survive --set <Value>
4.7. Alert Service¶
Enable Alert Setting
Enable Alert Setting
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t cluster/messages/use --set <Value>
-
Add Note
For details on "Module Type" and "Event ID", refer to "EXPRESSCLUSTER X Reference Guide" -> "Error messages" -> "Messages reported by event log and alert".
Destination
Alert
Value
Set
1
Do not set
0
clpcfadm.py mod -t messages/types@<Module Type> --set "" --nocheck clpcfadm.py mod -t messages/<Module Type>@<Event ID>/alert --set <Value(Destination (Alert Logs))> --nocheck clpcfadm.py mod -t messages/<Module Type>@<Event ID>/altexec --set <Value(Destination (Alert Extension))> --nocheck clpcfadm.py mod -t messages/<Module Type>@<Event ID>/mail --set <Value(Destination (Mail Report))> --nocheck clpcfadm.py mod -t messages/<Module Type>@<Event ID>/trap --set <Value(Destination (SNMP Trap))> --nocheck clpcfadm.py mod -t messages/<Module Type>@<Event ID>/pubsub --set <Value(Destination (Message Topic))> --nocheck clpcfadm.py mod -t messages/<Module Type>@<Event ID>/syslog --set <Value(Destination (Event Log(DisableOnly)))> --nocheck
Note
Even when you change part of the destinations, specify settings for all destinations as shown above.
Command (Within 511 bytes)
-
Add clpcfadm.py mod -t messages/<Module Type>@<Event ID>/cmd@<Command ID>/cmdline --set <Command> --nocheck
Note
Set as above with "Destination (Alert Extension)" set to "Set".
Note
With only one command, specify 0 for Command ID.With more than one command, specify consecutive numbers (e.g., 0, 1, 2...).
-
Delete clpcfset del clsparam messages/<Module Type>@<Event ID>/cmd@<Command ID>
-
-
Delete clpcfset del clsparam messages/<Module Type>@<Event ID> clpcfadm.py mod -t messages/types@<Module Type> --delete
-
-
Mail Report E-mail Address (Within 255 bytes)
clpcfadm.py mod -t cluster/mail/address --set <E-mail Address>
Subject (Within 127 bytes)
clpcfadm.py mod -t cluster/mail/subject --set <Subject>
Mail Method
Value
SMTP (default)
clpcfadm.py mod -t cluster/mail/sendtype --set <Value>
-
SMTP Settings Mail Charset (Within 127 bytes)
Mail Charset
Shift_JIS
ISO-2022-jp
ISO-8859-1
clpcfadm.py mod -t cluster/mail/smtp/charset --set <Mail Charset> --nocheck
Send Mail Timeout (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t cluster/mail/smtp/timeout --set <Value>
Subject Encode
Subject Encode
Value
Encode
1
Do not encode (default)
0
clpcfadm.py mod -t cluster/mail/smtp/subencode --set <Value>
-
SMTP Server -
Add Note
With only one SMTP Server, specify 0 for ID.With more than one SMTP Server, specify consecutive numbers (e.g., 0, 1, 2...).Priority
Default, None (minimum, 0; maximum, SMTP Server count - 1)
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/priority --set <Value> --nocheck
SMTP Server (Within 255 bytes)
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/srvname --set <SMTP Server> --nocheck
Use SSL
Use SSL
Value
Use
1
Do not use
0
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/ssl/use --set <Value> --nocheck
Connection Method
Value
SMTPS
STARTTLS
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/ssl/method --set <Value> --nocheck
Note
Set as above with "Use SSL" set to "Use".
SMTP Port
Default, None (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/port --set <Value> --nocheck
Sender Address (Within 255 bytes)
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/senderaddress --set <Sender Address> --nocheck
Enable SMTP Authentication
Enable SMTP Authentication
Value
Enable
1
Do not enable
0
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/auth --set <Value> --nocheck
Note
To set the following items, set "Enable SMTP Authentication" to "Enable" in advance.
Authentication Method
Value
CRAM-MD5
LOGIN
PLAIN
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/authmethod --set <Value> --nocheck
User Name (Within 255 bytes)
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/username --set <User Name> --nocheck
Password (Within 255 bytes)
clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID>/passwd --set <Encrypted password> --nocheck
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
-
Delete clpcfadm.py mod -t cluster/mail/smtp/smtpsrv@<ID> --delete
-
-
SNMP Trap -
Destination Settings Note
With only one SNMP Trap Destination Server, specify 0 for ID.With more than one SNMP Trap Destination Server, specify consecutive numbers (e.g., 0, 1, 2...).-
Add clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/srvname --set <Destination Server> --nocheck clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/port --set <SNMP Port> --nocheck clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/snmpver --set <SNMP Version> --nocheck clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/snmpcom --set <SNMP Community Name> --nocheck
Destination Server (Within 255 bytes)
clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/srvname --set <Destination Server> --nocheck
SNMP Port
Default, 162 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/port --set <Value> --nocheck
SNMP Version
Value
v1
v2c (default)
clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/snmpver --set <Value> --nocheck
SNMP Community Name (Within 255 bytes)
SNMP Community Name
public (default)
private
clpcfadm.py mod -t cluster/trap/snmpsrv@<ID>/snmpcom --set <SNMP Community Name> --nocheck
-
Delete clpcfadm.py mod -t cluster/trap/snmpsrv@<ID> --delete
-
Use Network Warning Light
Use Network Warning Light
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t cluster/dn1000s/use --set <Value>
Important
Configure "Warning Light" of the server properties.
Note
For "Use", set as follows:
clpcfadm.py mod -t alertservice/types@dn1000s --set "" --nocheck clpcfadm.py mod -t alertservice/dn1000s@dn1000s1 --set "" --nocheck clpcfadm.py mod -t alertservice/dn1000s@dn1000s1/priority --set 0 --nocheck clpcfadm.py mod -t alertservice/dn1000s@dn1000s1/device --set 20000 --nocheck clpcfadm.py mod -t alertservice/dn1000s@dn1000s1/kind --set nm --nocheck
Note
To change the setting for "Use Network Warning Light" from "Use" to "Do not use", set as follows:
clpcfset del clsparam alertservice
-
4.8. WebManager¶
Enable WebManager Service
Enable WebManager Service
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t webmgr/use --set <Value>
Note
To set the following items, set "Enable WebManager Service" to "Enable" in advance.
Communication Method
Communication Method
Value
HTTP (default)
0
HTTPS
1
clpcfadm.py mod -t webmgr/server/encryption/method --set <Value>Important
With "Communication Method" set to "HTTPS", configure "Encryption".
Number of sessions which can be established simultaneously
Default, 64 (minimum, 10; maximum, 999)
clpcfadm.py mod -t webmgr/server/maxclient --set <Value>
Control connection by using password
Password Method
Password Method
Value
Cluster Password Method (default)
0
OS Authentication Method
1
clpcfadm.py mod -t webmgr/security/loginuser/use --set <Value>
Cluster Password MethodNote
To set the following items, set "Password Method" to "Cluster Password Method" in advance.
Password for Operation
clpcfadm.py mod -t webmgr/security/userpwd --set <Encrypted password> --nocheckNote
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Password for Reference
clpcfadm.py mod -t webmgr/security/adminpwd --set <Encrypted password> --nocheckNote
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
OS Authentication MethodNote
To set the following items, set "Password Method" to "OS Authentication Method" in advance.
Authorized Group
Add
DeleteLogin Session Lifetime Period (min)
Default, 1440 (minimum, 0; maximum, 525600)
clpcfadm.py mod -t webmgr/security/loginuser/duration --set <Value>Automatic Logout Time Period (min)
Default, 60 (minimum, 0; maximum, 99999)
clpcfadm.py mod -t webmgr/security/loginuser/autologout/time --set <Value>Lockout Threshold (time)
Default, 0 (minimum, 0; maximum, 999)
clpcfadm.py mod -t webmgr/security/loginuser/failure/count --set <Value>Lockout Time (min)
Default, 10 (minimum, 1; maximum, 99999)
clpcfadm.py mod -t webmgr/security/loginuser/failure/duration --set <Value>
Control connection by using client IP address
Control connection by using client IP address
Value
Control
1
Do not control (default)
0
clpcfadm.py mod -t webmgr/security/clientlist/iprest --set <Value>Note
To set the following items, set "Control connection by using client IP addresses" to "Control" in advance.
Add
IP Address (Operation privilege granted)
clpcfadm.py mod -t webmgr/security/clientlist/ip@<IP Address> --set "" --nocheckIP Address (Operation privilege not granted)
clpcfadm.py mod -t webmgr/security/clientlist/ipro@<IP Address> --set "" --nocheck
Delete
IP Address (Operation privilege granted)
clpcfadm.py mod -t webmgr/security/clientlist/ip@<IP Address> --deleteIP Address (Operation privilege not granted)
clpcfadm.py mod -t webmgr/security/clientlist/ipro@<IP Address> --delete
Cluster WebUI Operation Log
Output Cluster WebUI Operation Log
Output Cluster WebUI Operation Log
Value
Output (default)
1
Do not output
0
clpcfadm.py mod -t webmgr/server/logopeuser/use --set <Value>
Log output path (Within 255 bytes) (Unless you specify a log output destination, the log is outputted to the default directory.)
clpcfadm.py mod -t webmgr/server/logopeuser/path --set <Log output path>Note
Use this setting if the "Output Cluster WebUI Operation Log" setting is "Output".
File Size (MB)
Default, 1 (minimum, 1; maximum, 10)
clpcfadm.py mod -t webmgr/server/logopeuser/size --set <Value>Note
Use this setting if the "Output Cluster WebUI Operation Log" setting is "Output".
-
Integrated WebManager -
Connection IP address -
Add clpcfadm.py mod -t server@<Server name>/device@<ID>/type --set public --nocheck clpcfadm.py mod -t server@<Server name>/device@<ID>/info --set <IP Address> --nocheck
Note
With only one IP address to be added, specify 100 for ID.With more than one IP address to be added, specify consecutive numbers (e.g., 100, 101, 102...). (Maximum: 199)
-
Delete clpcfadm.py mod -t server@<Server name>/device@<ID> --delete
-
-
-
Tuning Client Session Timeo
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t webmgr/server/timeout --set <Value>
Screen Data Refresh Interval (sec)
Default, 90 (minimum, 0; maximum, 999)
clpcfadm.py mod -t webmgr/client/pollinginterval --set <Value>
Mirror Agent Timeout (sec)
Default, 150 (minimum, 1; maximum, 999)
clpcfadm.py mod -t webmgr/server/mdagenttimeout --set <Value>
Time Limit For Keeping Log Files (sec)
Default, 600 (minimum, 60; maximum, 43200)
clpcfadm.py mod -t webmgr/server/logc/timeout/getfile --set <Value>
Use Time Information Display Function
Use Time Information Display Function
Value
Use (default)
1
Do not use
0
clpcfadm.py mod -t cluster/timeinfo/use --set <Value>
4.9. API¶
Enable API Service
Enable API Service
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t rstd/use --set <Value> --nocheck
Important
With "Enable API Service" set to "Enable", configure "Encryption".
Note
To set the following items, set "Enable API Service" to "Enable" in advance.
Communication Method
Communication Method
Value
HTTP
0
HTTPS (default)
1
clpcfadm.py mod -t rstd/server/encryption/method --set <Value> --nocheck
Set a privilege per group
Set a privilege per group
Value
Set
1
Do not set (default)
0
clpcfadm.py mod -t rstd/security/loginuser/use --set <Value> --nocheck
Note
To set the following items, set "Set a privilege per group" to "Set" in advance.
-
Add Operation privilege granted
clpcfadm.py mod -t rstd/security/loginuser/grouplist/ope@<Group Name> --set "" --nocheck
Operation privilege not granted
clpcfadm.py mod -t rstd/security/loginuser/grouplist/ref@<Group Name> --set "" --nocheck
-
Delete Operation privilege granted
clpcfset del clsparam rstd/security/loginuser/grouplist/ope@<Group Name>
Operation privilege not granted
clpcfset del clsparam rstd/security/loginuser/grouplist/ref@<Group Name>
-
Control connection by using client IP address
Control connection by using client IP address
Value
Control
1
Do not control (default)
0
clpcfadm.py mod -t rstd/security/clientlist/iprest --set <Value> --nocheck
-
Connection Permit Client IP Address Note
To set the following items, set "Control connection by using client IP addresses" to "Control" in advance.
-
Add IP Address (Operation privilege granted)
clpcfadm.py mod -t rstd/security/clientlist/ip@<IP Address> --set "" --nocheck
IP Address (Operation privilege not granted)
clpcfadm.py mod -t rstd/security/clientlist/ipro@<IP Address> --set "" --nocheck
-
Delete IP Address (Operation privilege granted)
clpcfset del clsparam rstd/security/clientlist/ip@<IP Address>
IP Address (Operation privilege not granted)
clpcfset del clsparam rstd/security/clientlist/ipro@<IP Address>
-
Output API Service Operation Log
Output API Service Operation Log
Value
Output (default)
1
Do not output
0
clpcfadm.py mod -t rstd/server/logopeuser/use --set <Value> --nocheck
Log output path (Within 255 bytes)
clpcfadm.py mod -t rstd/server/logopeuser/path --set <Log output path> --nocheck
Note
Set as above with "Output API Service Operation Log" set to "Yes".
File Size (MB) (Unless you specify a log output destination, the log is outputted to the default directory.)
Default, 1 (minimum, 1; maximum, 10)
clpcfadm.py mod -t rstd/server/logopeuser/size --set <Value> --nocheck
Note
Set as above with "Output API Service Operation Log" set to "Yes".
-
Tuning Authentication Lockout Threshold (time)
Default, 3 (minimum, 1; maximum, 5)
clpcfadm.py mod -t rstd/security/authretry --set <Value> --nocheck
HTTP Server Start Retry Count (time)
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t rstd/communication/http/retry --set <Value> --nocheck
HTTP Server Start Interval (time)
Default, 5 (minimum, 1; maximum, 99)
clpcfadm.py mod -t rstd/communication/http/interval --set <Value> --nocheck
4.10. Encryption¶
Certificate File (Within 1023 bytes)
clpcfadm.py mod -t webmgr/server/encryption/crtfile --set <Certificate File>
Private Key File (Within 1023 bytes)
clpcfadm.py mod -t webmgr/server/encryption/keyfile --set <Private Key File>
SSL Library (Within 1023 bytes)
SSL Library
C:\OpenSSL-Win64\ssleay32.dll
C:\Program Files\OpenSSL-Win64\libssl-1_1-x64.dll
C:\Program Files\OpenSSL-Win64\libssl-3-x64.dll
clpcfadm.py mod -t webmgr/server/encryption/ssllib --set <SSL Library>
Note
Set it according to the environment (e.g., installation folder).
Crypto Library (Within 1023 bytes)
Crypto Library
C:\OpenSSL-Win64\libeay32.dll
C:\Program Files\OpenSSL-Win64\libcrypto-1_1-x64.dll
C:\Program Files\OpenSSL-Win64\libcrypto-3-x64.dll
clpcfadm.py mod -t webmgr/server/encryption/cryptolib --set <Crypto Library>
Note
Set it according to the environment (e.g., installation folder).
4.11. Alert Log¶
Enable Alert Service
Enable Alert Service
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t webalert/use --set <Value>
Max. Number to Save Alert Records
Default, 10000 (minimum, 1; maximum, 99999)
clpcfadm.py mod -t webalert/main/alertlog/maxrecordcount --set <Value>
Enable a log file for investigation to be downloaded
Enable a log file for investigation to be downloaded
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t telem/ecap/use --set <Value> --nocheck
-
Alert Sync Method
Method
Value
unicast (default)
0
clpcfadm.py mod -t webalert/daemon/method --set <Value>
Communication Timeout (sec)
Default, 30 (minimum, 1; maximum, 300)
clpcfadm.py mod -t webalert/daemon/timeout --set <Value>
4.12. Delay Warning¶
Heartbeat Delay Warning (%)
Default, 80 (minimum, 1; maximum, 99)
clpcfadm.py mod -t cluster/delaywarn/heartbeat --set <Value>
Note
To turn off "Heartbeat Delay Warning", set 100.
clpcfadm.py mod -t cluster/delaywarn/heartbeat --set 100
Monitor Delay Warning (%)
Default, 80 (minimum, 1; maximum, 99)
clpcfadm.py mod -t cluster/delaywarn/monitor --set <Value>
Note
To turn off "Monitor Delay Warning", set 100.
clpcfadm.py mod -t cluster/delaywarn/monitor --set 100
4.13. Disk¶
-
At Disk Disconnection Failure Retry Interval (sec)
Default, 3 (minimum, 1; maximum, 10)
clpcfadm.py mod -t diskagent/deactsd/interval --set <Value> --nocheck
Retry Count
Default, 10 (minimum, 0; maximum, 180)
clpcfadm.py mod -t diskagent/deactsd/retry --set <Value> --nocheck
Note
To set "Retry Count" to "Unlimited", set 65535.
clpcfadm.py mod -t diskagent/deactsd/retry --set 65535 --nocheck
Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t diskagent/deactsd/timeout --set <Value> --nocheck
Final Action
Final Action
Value
Enforced Disconnection (default)
1
None
0
clpcfadm.py mod -t diskagent/deactsd/action --set <Value> --nocheck
4.14. Mirror Disk¶
Auto Mirror Initial Construction
Auto Mirror Initial Construction
Value
Automatically execute initial mirror construction (default)
1
Do not automatically execute initial mirror construction
0
clpcfadm.py mod -t diskagent/autofullcopy --set <Value> --nocheck
Auto Mirror Recovery
Auto Mirror Recovery
Value
Automatically recover a mirror (default)
1
Do not automatically recover a mirror
0
clpcfadm.py mod -t diskagent/autorecovery --set <Value> --nocheck
Difference Bitmap Size (KB)
Default, 1024 (minimum, 1024; maximum, 5120)
clpcfadm.py mod -t diskfltr/cpbitmapsize --set <Value> --nocheck
Note
Specify a value in KB (divisible by 1024).
History Recording Area Size in Asynchronous Mode (KB)
Default, 102400 (minimum, 1024; maximum, 102400)
clpcfadm.py mod -t diskfltr/cphistorysize --set <Value> --nocheck
Note
Specify a value in KB (divisible by 1024).
Allow failover on mirror break for specified time
Allow failover on mirror break for specified time
Value
Allow
1
Do not allow (default)
0
clpcfadm.py mod -t diskagent/foaccept/use --set <Value> --nocheck
Timeout (sec)
Default, 30 (minimum, 1; maximum, 600)
clpcfadm.py mod -t diskagent/foaccept/timeout --set <Value> --nocheck
Note
Set as above with "Allow failover on mirror break for specified time" set to "Allow".
-
At Disk Disconnection Failure Retry Interval (sec)
Default, 3 (minimum, 1; maximum, 10)
clpcfadm.py mod -t diskagent/deactmd/interval --set <Value> --nocheck clpcfadm.py mod -t diskagent/deacthd/interval --set <Value> --nocheck
Note
Set each of the <Value> fields to the same value.
Retry Count
Default, 10 (minimum, 0; maximum, 180)
clpcfadm.py mod -t diskagent/deactmd/retry --set <Value> --nocheck clpcfadm.py mod -t diskagent/deacthd/retry --set <Value> --nocheck
Note
Set each of the <Value> fields to the same value.
Note
To set "Retry Count" to "Unlimited", set 65535.
clpcfadm.py mod -t diskagent/deactmd/retry --set 65535 --nocheck clpcfadm.py mod -t diskagent/deacthd/retry --set 65535 --nocheck
Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t diskagent/deactmd/timeout --set <Value> --nocheck clpcfadm.py mod -t diskagent/deacthd/timeout --set <Value> --nocheck
Note
Set each of the <Value> fields to the same value.
Final Action
Final Action
Value
Enforced Disconnection (default)
1
None
0
clpcfadm.py mod -t diskagent/deactmd/action --set <Value> --nocheck clpcfadm.py mod -t diskagent/deacthd/action --set <Value> --nocheck
Note
Set each of the <Value> fields to the same value.
4.15. Account¶
Note
-
Add clpcfadm.py mod -t cluster/account/list@<ID>/username --set <User Name> --nocheck clpcfadm.py mod -t cluster/account/list@<ID>/password --set <Encrypted password> --nocheck
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
-
Delete clpcfadm.py mod -t cluster/account/list@<ID> --delete
4.16. RIP (Legacy)¶
Note
-
Add clpcfadm.py mod -t cluster/rip/list@<ID>/ip --set <Network Address> --nocheck clpcfadm.py mod -t cluster/rip/list@<ID>/mask --set <Net Mask> --nocheck
-
Delete clpcfadm.py mod -t cluster/rip/list@<ID> --delete
4.17. JVM Monitor¶
Java Installation Path (Within 255 bytes)
clpcfadm.py mod -t jra/path/java --set <Java Installation Path> --nocheck
Maximum Java Heap Size (MB)
Default, 16 (minimum, 7; maximum, 4096)
clpcfadm.py mod -t jra/javaopt/xmx --set <Value> --nocheck
Java VM Additional Option (Within 1024 bytes)
clpcfset add clsparam jra/javaopt/javaoptex <Java VM Additional Option>
Note
Enter a hyphen (-) as the first character of an additional option for Java VM.
-
Log Output Setting Log Level
Value
DEBUG
INFO (default)
WARN
ERROR
FATAL
clpcfadm.py mod -t jra/log/level --set <Value> --nocheck
Generation
Default, 10 (minimum, 2; maximum, 100)
clpcfadm.py mod -t jra/log/count --set <Value> --nocheck
-
Rotation Type Rotation Type
Rotation Type
Value
File size (default)
1
Time
2
clpcfadm.py mod -t jra/log/rotation/common --set <Value> --nocheck
Max Size (KB)
Default, 3072 (minimum, 200; maximum, 2097151)
clpcfadm.py mod -t jra/log/maxsize --set <Value> --nocheck
Note
Set as above with "Rotation Type" set to "File Size".
Start Time
Default, 00:00 (00:00 to 23:59)
clpcfadm.py mod -t jra/log/timerotation/point --set <Value> --nocheck
Note
Set as above with "Rotation Type" set to "Time".
Interval (hours)
Default, 24 (minimum, 1; maximum, 8784)
clpcfadm.py mod -t jra/log/timerotation/interval --set <Value> --nocheck
Note
Set as above with "Rotation Type" set to "Time".
-
Resource Measurement Setting -
Common Retry Count
Default, 10 (minimum, 1; maximum, 1440)
clpcfadm.py mod -t jra/measure/retry --set <Value> --nocheck
Failure Threshold (time)
Default, 5 (minimum, 1; maximum, 10)
clpcfadm.py mod -t jra/change/count --set <Value> --nocheck
-
Interval Memory Usage,Active Threads (sec)
Default, 60 (minimum, 15; maximum, 600)
clpcfadm.py mod -t jra/measure/interval/value --set <Value> --nocheck
The time and count in Full GC (sec)
Default, 120 (minimum, 15; maximum, 600)
clpcfadm.py mod -t jra/measure/interval/gc --set <Value> --nocheck
-
WebLogic Retry Count
Default, 3 (minimum, 1; maximum, 5)
clpcfadm.py mod -t jra/wl/queue/retry --set <Value> --nocheck
Failure Threshold (time)
Default, 5 (minimum, 1; maximum, 10)
clpcfadm.py mod -t jra/wl/queue/change/count --set <Value> --nocheck
-
Interval The number of request (sec)
Default, 60 (minimum, 15; maximum, 600)
clpcfadm.py mod -t jra/wl/queue/measure/interval --set <Value> --nocheck
The average number of the request (sec)
Default, 300 (minimum, 15; maximum, 600)
clpcfadm.py mod -t jra/wl/queue/average/interval --set <Value> --nocheck
Note
For the interval for measuring the average, specify an integral multiple of the measured interval value for Requests.
-
-
Connection Setting Management Port
Default, 25500 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t jra/admin/port --set <Value> --nocheck
Retry Count
Default, 3 (minimum, 1; maximum, 5)
clpcfadm.py mod -t jra/connect/retry --set <Value> --nocheck
Waiting time for reconnection (sec)
Default, 60 (minimum, 15; maximum, 60)
clpcfadm.py mod -t jra/connect/wait --set <Value> --nocheck
Action Timeout (sec)
Default, 60 (minimum, 30; maximum, 300)
clpcfadm.py mod -t jra/action/wait --set <Value> --nocheck
4.18. Cloud¶
-
Amazon SNS Enable Amazon SNS Linkage Function
Enable Amazon SNS Linkage Function
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t cluster/cloud/aws/sns/use --set <Value>
TopicArn (Within 512 bytes)
clpcfadm.py mod -t cluster/cloud/aws/sns/topicarn --set <TopicArn>
Note
Set as above with "Enable Amazon SNS Linkage Function" set to "Enable".
-
Amazon CloudWatch Enable Amazon CloudWatch Linkage Function
Enable Amazon CloudWatch Linkage Function
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t cluster/cloud/metrics/aws/cloudwatch/use --set <Value>
Namespace (Within 255 bytes)
clpcfadm.py mod -t cluster/cloud/metrics/aws/cloudwatch/namespace --set <Namespace>
Note
Set as above with "Enable Amazon CloudWatch Linkage Function" set to "Enable".
Interval for Sending Metrics
Default, 60 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t cluster/cloud/metrics/interval --set <Value>
Note
Set as above with "Enable Amazon CloudWatch Linkage Function" set to "Enable".
-
Command line options (AWS CLI) -
AWS CLI Command line options aws cloudwatch (Within 2047 bytes)
clpcfadm.py mod -t cluster/cloud/aws/cmdopt/cloudwatch --set <Command line options>
aws ec2 (Within 2047 bytes)
clpcfadm.py mod -t cluster/cloud/aws/cmdopt/ec2 --set <Command line options>
aws route53 (Within 2047 bytes)
clpcfadm.py mod -t cluster/cloud/aws/cmdopt/route53 --set <Command line options>
aws sns (Within 2047 bytes)
clpcfadm.py mod -t cluster/cloud/aws/cmdopt/sns --set <Command line options>
-
-
Environment variable -
Environment variables at the time of performing AWS-related features Add
clpcfadm.py mod -t cluster/cloud/aws/envs/env@<ID>/name --set <Name> --nocheck clpcfadm.py mod -t cluster/cloud/aws/envs/env@<ID>/value --set <Value> --nocheck
Note
With only one environment variable, specify 0 for ID.With more than one environment variable, specify consecutive numbers (e.g., 0, 1, 2...).Delete
clpcfadm.py mod -t cluster/cloud/aws/envs/env@<ID> --delete
-
4.19. Statistics¶
-
Cluster Statistics Heartbeat Resource
Heartbeat Resource
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t cluster/perf/log/heartbeat/use --set <Value>
File Size (MB)
Default, 50 (minimum, 1; maximum, 50)
clpcfadm.py mod -t cluster/perf/log/heartbeat/size --set <Value>
Note
Set as above with "Heartbeat Resource" set to "Enable".
Group
Group
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t cluster/perf/log/group/use --set <Value>
File Size (MB)
Default, 1 (minimum, 1; maximum, 5)
clpcfadm.py mod -t cluster/perf/log/group/size --set <Value>
Note
Set as above with "Group" set to "Enable".
Group Resource
Group Resource
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t cluster/perf/log/resource/use --set <Value>
File Size (MB)
Default, 1 (minimum, 1; maximum, 5)
clpcfadm.py mod -t cluster/perf/log/resource/size --set <Value>
Note
Set as above with "Group Resource" set to "Enable".
Monitor Resource
Monitor Resource
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t cluster/perf/log/monitor/use --set <Value>
File Size (MB)
Default, 10 (minimum, 1; maximum, 10)
clpcfadm.py mod -t cluster/perf/log/monitor/size --set <Value>
Note
Set as above with "Monitor Resource" set to "Enable".
-
Mirror Statistics Collect Statistics
Collect Statistics
Value
Collect (default)
1
Do not collect
0
clpcfadm.py mod -t diskperf/parameters/perfenable --set <Value> --nocheck
-
System Resource Statistics Collect Statistics
Collect Statistics
Value
Collect
1
Do not collect (default)
0
clpcfadm.py mod -t cluster/sysinfo/collect --set <Value>
4.20. Extension¶
-
Reboot Limitation Max Reboot Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t reg/rc/halt/count --set <Value> --nocheck clpcfadm.py mod -t reg/rm/halt/count --set <Value> --nocheck
Note
Set each of the <Value> fields to the same value.
Note
If you set "Max Reboot Count" to 0, the repetition of reboot is not limited.
Note
If you set "Max Reboot Count" to 0, the reboot count is not reset.
Max Reboot Count Reset Time (min)
Default, 60 (minimum, 0; maximum, 999)
clpcfadm.py mod -t reg/rc/halt/reset --set <Value> --nocheck clpcfadm.py mod -t reg/rm/halt/reset --set <Value> --nocheck
Note
Set each of the <Value> fields to the same value.
Auto Return
Auto Return
Value
Yes (default)
1
No
0
clpcfadm.py mod -t cluster/autoreturn/common --set <Value>
Grace period of server group failover policy (msec)
Default, 0 (minimum, 0; maximum, 99999000)
clpcfadm.py mod -t cluster/heartbeat/fodelay --set <Value>
Note
Specify a value in milliseconds (divisible by 1000).
Change from OS Stop to OS Restart
Change from OS Stop to OS Restart
Value
Yes
1
No (default)
0
clpcfadm.py mod -t cluster/override/finalaction --set <Value>
-
Disable Cluster Operation (Recommended for maintenance purposes) Group Automatic Startup
Group Automatic Startup
Value
Disable
1
Do not disable (default)
0
clpcfadm.py mod -t rc/autostart/group/disable --set <Value> --nocheck
Recovery Operation when Group Resource Activation Failure Detected
Recovery Operation when Group Resource Activation Failure Detected
Value
Disable
1
Do not disable (default)
0
clpcfadm.py mod -t rc/errordetect/rscact/norecovery --set <Value> --nocheck
Recovery Operation when Group Resource Deactivation Failure Detected
Recovery Operation when Group Resource Deactivation Failure Detected
Value
Disable
1
Do not disable (default)
0
clpcfadm.py mod -t rc/errordetect/rscdeact/norecovery --set <Value> --nocheck
Recovery Action when Monitor Resource Failure Detected
Recovery Action when Monitor Resource Failure Detected
Value
Disable
1
Do not disable (default)
0
clpcfadm.py mod -t rm/errordetect/norecovery --set <Value>
Failover when Server Failure Detected
Failover when Server Failure Detected
Value
Disable
1
Do not disable (default)
0
clpcfadm.py mod -t rc/svdowndetect/nofailover --set <Value> --nocheck
-
Settings of log storage period Use log storage period feature
Use log storage period feature
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t cluster/logarc/use --set <Value>
Note
To set the following items, set "Use log storage period feature" to "Use" in advance.
Store log for (days)
Default, 7 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t cluster/logarc/period --set <Value>
Log storage destination (Within 170 bytes)
clpcfadm.py mod -t cluster/logarc/path --set <Log storage destination>
Log storage timing
Default, None (00:00 to 23:59)
clpcfadm.py mod -t cluster/logarc/time --set <Value>
5. Configuring a server¶
Note
5.1. Adding a server¶
Be sure to set the following items. For details, see "Setting server parameters".
Item (mandatory)
Server name
Priority
clpcfadm.py add srv srv1 <Priority>Note
Of the cluster properties, configure the interconnect in advance.
Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
5.2. Setting parameters common to servers¶
-
Priority of servers that can start clpcfadm.py mod -t server@<Server name>/priority --set <Priority of servers that can start>
Note
For the master server, specify 0 for Priority of servers that can start.For servers other than the master server, specify consecutive numbers (e.g., 1, 2, 3...).
-
Server group -
Add clpcfadm.py mod -t servergroup@<Server group name>/comment --set <Comment> --nocheck clpcfadm.py mod -t servergroup@<Server group name>/policy@<Server name>/order --set <Priority> --nocheck
Note
Enclose in double quotes a comment including spaces (e.g., "Sample Comment").
Note
With only one server belonging to the server group, specify 0 for Priority.With more than one server belonging to the server group, specify consecutive numbers (e.g., 0, 1, 2...).
-
Delete clpcfadm.py mod -t servergroup@<Server group name> --delete
-
5.3. Setting server parameters¶
5.3.1. Basic information¶
Server Name (Within 31 bytes)
This is set when the server is added. To change the server name, delete the server and set it again
Comment (Within 127 bytes)
clpcfadm.py mod -t server@srv1/comment --set <Comment> --nocheck
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
5.3.2. Warning Light¶
-
Add (Edit) Warning Light
Warning Light
Value
DN-1000S / DN-1000R / DN-1300GL (default)
dn1000s
DN-1500GL
dn1500gl
NH-FB series / NH-FB1 series
patlite
NH-FV1 series
nhfv1
clpcfadm.py mod -t server@srv1/device@20000/type --set <Value> --nocheck
Important
To change the setting for "Warning Light", set as follows:
clpcfadm.py mod -t server@srv1/device@20000/normal/voice --set "" --nocheck clpcfadm.py mod -t server@srv1/device@20000/normal/voicefile --set "" --nocheck clpcfadm.py mod -t server@srv1/device@20000/error/voice --set "" --nocheck clpcfadm.py mod -t server@srv1/device@20000/error/voicefile --set "" --nocheck
IP Address
clpcfadm.py mod -t server@srv1/device@20000/info --set <Value> --nocheck
User Name (Within 255 bytes)
clpcfadm.py mod -t server@srv1/device@20000/user --set <Value> --nocheck
Password (Within 255 bytes)
clpcfadm.py mod -t server@srv1/device@20000/password --set <Value> --nocheck
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
Set rsh Command File Path
Set rsh Command File Path
Value
Set
1
Do not set (default)
0
clpcfadm.py mod -t server@srv1/device@20000/rsh --set <Value> --nocheck
File Path (Within 1023 bytes)
clpcfadm.py mod -t server@srv1/device@20000/rshpath --set <Value> --nocheck
Note
Set as above with "Set rsh Command File Path" set to "Set".
Alert When Server Starts
Alert When Server Starts
Value
Yes
1
No (default)
0
clpcfadm.py mod -t server@srv1/device@20000/normal/voice --set <Value> --nocheck
Note
Set as above with "Warning Light" set to "DN-1500GL" or "NH-FV1 series".
Voice File No.
- If "Warning Light" is set to "DN-1500GL"
Default, 01 (minimum, 01; maximum, 20)
- If "Warning Light" is set to "NH-FV1 series"
Default, 65 (minimum, 01; maximum, 70)
clpcfadm.py mod -t server@srv1/device@20000/normal/voicefile --set <Value> --nocheck
Note
Set as above with "Alert When Server Starts" set to "Yes".
Alert When Server Stops
Alert When Server Stops
Value
Yes
1
No (default)
0
clpcfadm.py mod -t server@srv1/device@20000/error/voice --set <Value> --nocheck
Note
Set as above with "Warning Light" set to "DN-1500GL" or "NH-FV1 series".
Voice File No.
- If "Warning Light" is set to "DN-1500GL"
Default, 02 (minimum, 01; maximum, 20)
- If "Warning Light" is set to "NH-FV1 series"
Default, 66 (minimum, 01; maximum, 70)
clpcfadm.py mod -t server@srv1/device@20000/error/voicefile --set <Value> --nocheck
Note
Set as above with "Alert When Server Starts" set to "Yes".
-
Delete clpcfadm.py mod -t server@srv1/device@20000 --delete
5.3.3. HBA¶
HBAs to be managed by the cluster system
-
Add clpcfadm.py add hba srv1 <ID> <Port Number> <HBA Device ID> <HBA Instance ID>
Note
With only one HBA to be managed by the cluster system, specify 0 for ID.With more than one HBA to be managed by the cluster system, specify consecutive numbers (e.g., 0, 1, 2...).Note
The port number, the HBA device ID, and the HBA instance ID can be retrieved by using the clpdiskctrl command.For details, see "clpdiskctrl command".
-
Delete clpcfadm.py del hba srv1 <ID>
-
Partition excluded from cluster management
-
Add clpcfadm.py mod -t server@<Server name>/hba@<ID>/vol@<Volume ID>/volumeguid --set <GUID> --nocheck clpcfadm.py mod -t server@<Server name>/hba@<ID>/vol@<Volume ID>/volumemountpoint --set <Drive letter> --nocheck
Note
With only one HBA to be managed by the cluster system, specify 0 for ID.With more than one HBA to be managed by the cluster system, specify consecutive numbers (e.g., 0, 1, 2...).Note
With only one partition excluded from cluster management, specify 0 for Volume ID.With more than one partition excluded from cluster management, specify consecutive numbers (e.g., 0, 1, 2...).Note
The GUID can be retrieved by using the clpdiskctrl command.For details, see "clpdiskctrl command".
-
Delete clpcfadm.py mod -t server@<Server name>/hba@<ID>/vol@<Volume ID> --delete
-
5.3.4. Proxy¶
Proxy Scheme
Proxy Scheme
Value
None (default)
0
HTTP
1
clpcfadm.py mod -t server@srv1/proxy/scheme --set <Value>
Proxy Server (Within 255 bytes)
clpcfadm.py mod -t server@srv1/proxy/server --set <Proxy Server>
Note
Set as above with "Proxy Scheme" set to "HTTP".
Proxy Port
Default, None (minimum, 1; maximum, 65535)
clpcfadm.py mod -t server@srv1/proxy/port --set <Value>
Note
Set as above with "Proxy Scheme" set to "HTTP".
6. Configuring a group¶
Note
6.1. Adding a group¶
Be sure to set the following items. For details, see "Setting group parameters".
Item (mandatory)
Group name
Group type
Value
Failover group
failover
Management group
ManagementGroup
clpcfadm.py add grp <Group type> <Group name>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
6.2. Setting parameters common to groups¶
6.2.1. Exclusion¶
-
Add clpcfadm.py mod -t xclrule@<Exclusion Name> --set "" --nocheck clpcfadm.py mod -t xclrule@<Exclusion Name>/comment --set <Comment> --nocheck clpcfadm.py mod -t xclrule@<Exclusion Name>/type --set <Exclusive Attribute> --nocheck clpcfadm.py mod -t xclrule@<Exclusion Name>/group@<Exclusive Group> --set "" --nocheck clpcfadm.py mod -t xclrule@<Exclusion Name>/order --set 0 --nocheck
Exclusion Name (Within 31 bytes)
clpcfadm.py mod -t xclrule@<Exclusion Name> --set "" --nocheck
Comment (Within 127 bytes)
clpcfadm.py mod -t xclrule@<Exclusion Name>/comment --set <Comment> --nocheck
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
Exclusive Attribute
Exclusive Attribute
Value
Normal Exclusion (default)
normal
Absolute Exclusion
high
clpcfadm.py mod -t xclrule@<Exclusion Name>/type --set <Value> --nocheck
Exclusive Group
-
Add clpcfadm.py mod -t xclrule@<Exclusion Name>/group@<Exclusive Group> --set "" --nocheck
-
Delete clpcfadm.py mod -t xclrule@<Exclusion Name>/group@<Exclusive Group> --delete
-
-
Delete clpcfadm.py mod -t xclrule@<Exclusion Name> --delete
6.3. Setting group parameters¶
6.3.1. Basic information¶
Use Server Group Settings
-
Set clpcfadm.py mod -t group@failover1/svgpolicy@<ID>/order --set <The priority of a server group> --nocheck clpcfadm.py mod -t group@failover1/svgpolicy@<ID>/svgname --set <Server group name> --nocheck clpcfadm.py mod -t group@failover1/policy@<Server name>/order --set <Priority> --nocheck
-
Delete clpcfadm.py mod -t group@failover1/svgpolicy@<ID> --delete clpcfadm.py mod -t group@failover1/policy --delete
-
Group Name (Within 31 bytes)
This is set when the group is added. To change the group name, delete the group and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t group@failover1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
6.3.2. Startup Server¶
Failover is possible at all servers (default)
clpcfadm.py mod -t group@failover1/policy@<Server name> --delete
Note
Delete all configured servers.
Set Up Individually
-
Add clpcfadm.py mod -t group@failover1/policy@<Server name>/order --set <The priority of starting up> --nocheck
-
Delete clpcfadm.py mod -t group@failover1/policy@<Server name> --delete
-
6.3.3. Attribute¶
Startup Attribute
Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t group@failover1/start --set <Value>
Execute Multi-Failover-Service Check
Execute Multi-Failover-Service Check
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t group@failover1/checksvv/use --set <Value>
Timeout (sec)
Default, 300 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t group@failover1/checksvv/preactping/timeout --set <Value>
Note
Set as above with "Execute Multi-Failover-Service Check" set to "Check".
-
Failover Attribute Failover Attribute
-
Automatic failover Use startable server settings
clpcfadm.py mod -t group@failover1/failover --set 1
Failover dynamically
clpcfadm.py mod -t group@failover1/failover --set 100
Prioritize server group failover policy
Prioritize server group failover policy
Value
Prioritize
1
Do not prioritize (default)
0
clpcfadm.py mod -t group@failover1/autonomic/functype/srvgrp/use --set <Value>
Perform a Smart Failover
Perform a Smart Failover
Value
Perform smart failover
1
Do not perform smart failover (default)
0
clpcfadm.py mod -t group@failover1/autonomic/functype/sra/use --set <Value>
Prioritize server group failover policy
clpcfadm.py mod -t group@failover1/failover --set 200
Enable only manual failover among the server groups
clpcfadm.py mod -t group@failover1/failover --set 201
Manual failover
clpcfadm.py mod -t group@failover1/failover --set 0
-
-
Failover Attribute (Advanced) Exclude Server with Error Detected by Specified Monitor Resource, from Failover Destination
Exclude Server with Error Detected by Specified Monitor Resource, from Failover Destination
Value
Exclude
1
Do not exclude (default)
0
clpcfadm.py mod -t group@failover1/autonomic/blacklist/use --set <Value>
-
Edit Monitor Note
To set the following items, set "Exclude Server with Error Detected by Specified Monitor Resource, from Failover Destination" to "Exclude" in advance.
Monitor resource type
-
Add Monitor resource type
Value
Application monitor
appliw
AWS AZ monitor
awsazw
AWS DNS monitor
awsdnsw
AWS Elastic IP monitor
awseipw
AWS Secondary IP monitor
awssipw
AWS Virtual IP monitor
awsvipw
Azure DNS monitor
azurednsw
Azure load balance monitor
azurelbw
Azure probe port monitor
azureppw
CIFS monitor
cifsw
DB2 monitor
db2w
Disk RW monitor
diskw
Floating IP monitor
fipw
FTP monitor
ftpw
Google Cloud DNS monitor
gcdnsw
Google Cloud load balance monitor
gclbw
Google Cloud Virtual IP monitor
gcvipw
Custom monitor
genw
HTTP monitor
httpw
IMAP4 monitor
imap4w
IP monitor
ipw
JVM monitor
jraw
NIC Link Up/Down monitor
miiw
Eternal link monitor
mrw
Oracle Cloud DNS monitor
ocdnsw
Oracle Cloud load balance monitor
oclbw
Oracle Cloud Virtual IP monitor
ocvipw
ODBC monitor
odbcw
Oracle monitor
oraclew
WebOTX monitor
otxw
POP3 monitor
pop3w
PostgreSQL monitor
psqlw
Process resource monitor
psrw
Process name monitor
psw
Disk TUR monitor
sdw
Service monitor
servicew
SMTP monitor
smtpw
SQL Server monitor
sqlserverw
System monitor
sraw
Tuxedo monitor
tuxw
Virtual IP monitor
vipw
WebSphere monitor
wasw
WebLogic monitor
wlsw
clpcfadm.py mod -t group@failover1/autonomic/functype/blacklist/target --set <Value>
Note
To add two or more monitor resource types, put commas (,) to separate them.
clpcfadm.py mod -t group@failover1/autonomic/functype/blacklist/target --set ipw,miiw
-
Delete clpcfadm.py mod -t group@failover1/autonomic/functype/blacklist/target --delete
Important
Delete all set monitor resource types.
-
Monitor resource group
-
Add clpcfadm.py mod -t group@failover1/autonomic/functype/blacklist/targetgrp@0/rsc@<Monitor resource name> --set "" --nocheck
-
Delete clpcfadm.py mod -t group@failover1/autonomic/functype/blacklist/targetgrp@0/rsc@<Monitor resource name> --delete
-
Failover with Error Ignored If It Is Detected in All Servers
Failover with Error Ignored If It Is Detected in All Servers
Value
Fail over
1
Do not fail over (default)
0
clpcfadm.py mod -t group@failover1/autonomic/forcefo/use --set <Value>
Note
Set as above with "Exclude Server with Error Detected by Specified Monitor Resource, from Failover Destination" set to "Exclude".
-
Failback Attribute Failback Attribute
Failback Attribute
Value
Automatic failback
1
Manual failback (default)
0
clpcfadm.py mod -t group@failover1/failback --set <Value>
6.3.4. Start Dependency¶
Dependent Group
-
Add clpcfadm.py mod -t group@failover1/depend/act/depend@<Group Name> --set "" --nocheck
-
Delete clpcfadm.py mod -t group@failover1/depend/act/depend@<Group Name> --delete
-
-
Properties Wait Only when on the Same Server
Wait Only when on the Same Server
Value
Wait
1
Do not wait (default)
0
clpcfadm.py mod -t group@failover1/depend/act/depend@<Server name>/sameserver --set <Value> --nocheck
Start Wait Time (sec)
Default, 1800 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t group@failover1/depend/act/timeout --set <Value>
6.3.5. Stop Dependency¶
Dependent Group
-
Add clpcfadm.py mod -t group@failover1/depend/deact/depend@<Group Name> --set "" --nocheck
-
Delete clpcfadm.py mod -t group@failover1/depend/deact/depend@<Group Name> --delete
-
Start Wait Time (sec)
Default, 1800 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t group@failover1/depend/deact/timeout --set <Value>
Wait the Dependent Groups when a Cluster Stops
Wait the Dependent Groups when a Cluster Stops
Value
Wait for the stop (default)
1
Do not wait for the stop
0
clpcfadm.py mod -t group@failover1/depend/deact/cluster/use --set <Value>
Wait the Dependent Groups when a Server Stops
Wait the Dependent Groups when a Server Stops
Value
Wait for the stop
1
Do not wait for the stop (default)
0
clpcfadm.py mod -t group@failover1/depend/deact/server/use --set <Value>
Wait the Dependent Groups when a Group Stops
Wait the Dependent Groups when a Group Stops
Value
Wait for the stop
1
Do not wait for the stop (default)
0
clpcfadm.py mod -t group@failover1/depend/deact/other/use --set <Value>
If stopping a target group fails, await the timeout
If stopping a target group fails, await the timeout
Value
Yes (default)
1
No
0
clpcfadm.py mod -t group@failover1/depend/deact/failedbutwait --set <Value>
Note
Set as above with any of the following items set to "Yes":- "Wait the Dependent Groups when a Cluster Stops"- "Wait the Dependent Groups when a Server Stops"- "Wait the Dependent Groups when a Group Stops"
7. Configuring group resources¶
7.1. Application resource¶
Note
7.1.1. Adding an application resource¶
Be sure to set the following items. For details, see "Setting application resource parameters".
Item (mandatory)
Group resource name
Start Path
clpcfadm.py add rsc <Name of a group to which the resource belongs> appli appli1 clpcfadm.py mod -t resource/appli@appli1/parameters/actpath --set <Start Path>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.1.2. Setting application resource parameters¶
7.1.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/appli@appli1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.1.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep appli appli1
Set a parent resource
clpcfadm.py add rscdep appli appli1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep appli appli1 ""
Delete a parent resource
clpcfadm.py mod -t resource/appli@appli1/depend@<Parent resource name> --delete
7.1.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/appli@appli1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/appli@appli1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/appli@appli1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/appli@appli1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/appli@appli1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/appli@appli1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/appli@appli1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/appli@appli1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/appli@appli1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/appli@appli1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/appli@appli1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/appli@appli1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/appli@appli1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/appli@appli1/deact/preaction/account --set <Exec User>
-
7.1.2.4. Details¶
Resident Type
Resident Type
Value
Resident (default)
1
Non-Resident
0
clpcfadm.py mod -t resource/appli@appli1/parameters/resident --set <Value>
Start Path (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/actpath --set <Start Path>
Stop Path (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/deactpath --set <Stop Path>
-
Tuning -
Parameter -
Start (Start) Synchronization type
(Start) Synchronization type
Value
Synchronous (default)
1
Asynchronous
0
clpcfadm.py mod -t resource/appli@appli1/parameters/actsync --set <Value>
Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/appli@appli1/parameters/acttimeout --set <Value>
Note
Set as above with "(Start) Synchronization type" set to "Synchronous".
Normal Return Value
clpcfadm.py mod -t resource/appli@appli1/parameters/actnormalval --set <Value>
Note
Set as above with "(Start) Synchronization type" set to "Synchronous".
-
Stop (Stop) Synchronization type
(Stop) Synchronization type
Value
Synchronous (default)
1
Asynchronous
0
clpcfadm.py mod -t resource/appli@appli1/parameters/deactsync --set <Value>
Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/appli@appli1/parameters/deacttimeout --set <Value>
Note
Set as above with "(Stop) Synchronization type" set to "Synchronous".
Normal Return Value
clpcfadm.py mod -t resource/appli@appli1/parameters/deactnormalval --set <Value>
Note
Set as above with "(Stop) Synchronization type" set to "Synchronous".
Target VCOM Resource Name
clpcfadm.py mod -t resource/appli@appli1/parameters/target --set <Target VCOM Resource Name>
Allow to Interact with Desktop
Allow to Interact with Desktop
Value
Allow
1
Do not allow (default)
0
clpcfadm.py mod -t resource/appli@appli1/parameters/actinteractive --set <Value> clpcfadm.py mod -t resource/appli@appli1/parameters/deactinteractive --set <Value>
Note
Set each of the <Value> fields to the same value.
Kill the application when exit
Kill the application when exit
Value
Yes
1
No (default)
0
clpcfadm.py mod -t resource/appli@appli1/parameters/termination --set <Value>
Note
Set as above with "Resident Type" set to "Resident".
Exec User
Default: (Set Up Individually)
clpcfadm.py mod -t resource/appli@appli1/parameters/account --set <Exec User>
Note
To change the current setting to "Set Up Individually", set as follows:
clpcfadm.py mod -t resource/appli@appli1/parameters/account --delete
-
-
Start Current Directory (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/actdirectory --set <Current Directory>
Option Parameter (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/actoption --set <Option Parameter>
Window Size
Window Size
Value
Hide (default)
0
Normal
1
Maximize
2
Minimize
3
clpcfadm.py mod -t resource/appli@appli1/parameters/actwindowsize --set <Value>
-
Exec User Domain
clpcfadm.py mod -t resource/appli@appli1/parameters/actdomain --set <Domain>
Account
clpcfadm.py mod -t resource/appli@appli1/parameters/actaccount --set <Account>
Password (Within 255 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/actpassword --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
Execute from the command prompt
Execute from the command prompt
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/parameters/actcmd --set <Value>
-
Stop Current Directory (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/deactdirectory --set <Current Directory>
Option Parameter (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/deactoption --set <Option Parameter>
Window Size
Window Size
Value
Hide (default)
0
Normal
1
Maximize
2
Minimize
3
clpcfadm.py mod -t resource/appli@appli1/parameters/deactwindowsize --set <Value>
-
Exec User Domain
clpcfadm.py mod -t resource/appli@appli1/parameters/deactdomain --set <Domain>
Account
clpcfadm.py mod -t resource/appli@appli1/parameters/deactaccount --set <Account>
Password (Within 255 bytes)
clpcfadm.py mod -t resource/appli@appli1/parameters/deactpassword --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
Execute from the command prompt
Execute from the command prompt
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/parameters/deactcmd --set <Value>
-
7.1.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/appli@appli1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/appli@appli1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/appli@appli1/preact/default --set <Value> clpcfadm.py mod -t resource/appli@appli1/predeact/default --set <Value> clpcfadm.py mod -t resource/appli@appli1/postact/default --set <Value> clpcfadm.py mod -t resource/appli@appli1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/appli@appli1/preact/path --set <File> clpcfadm.py mod -t resource/appli@appli1/predeact/path --set <File> clpcfadm.py mod -t resource/appli@appli1/postact/path --set <File> clpcfadm.py mod -t resource/appli@appli1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/appli@appli1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/appli@appli1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/appli@appli1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/appli@appli1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/appli@appli1/preact/timeout --set <Value> clpcfadm.py mod -t resource/appli@appli1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/appli@appli1/postact/timeout --set <Value> clpcfadm.py mod -t resource/appli@appli1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/appli@appli1/preact/account --set <Value> clpcfadm.py mod -t resource/appli@appli1/predeact/account --set <Value> clpcfadm.py mod -t resource/appli@appli1/postact/account --set <Value> clpcfadm.py mod -t resource/appli@appli1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.1.3. Deleting an application resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> appli appli1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.2. AWS DNS resource¶
Note
7.2.1. Adding an AWS DNS resource¶
Be sure to set the following items. For details, see "Setting AWS DNS resource parameters".
Item (mandatory)
Group resource name
Hosted Zone ID
Resource Record Set Name
IP Address
clpcfadm.py add rsc <Name of a group to which the resource belongs> awsdns awsdns1 clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/hostedzoneid --set <Hosted Zone ID> clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/recordset --set <Resource Record Set Name> clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/ip --set <IP Address (Common)> clpcfadm.py mod -t resource/awsdns@awsdns1/server@<Server name>/parameters/ip --set <IP Address (Individual)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.2.2. Setting AWS DNS resource parameters¶
7.2.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/awsdns@awsdns1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.2.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep awsdns awsdns1
Set a parent resource
clpcfadm.py add rscdep awsdns awsdns1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep awsdns awsdns1 ""
Delete a parent resource
clpcfadm.py mod -t resource/awsdns@awsdns1/depend@<Parent resource name> --delete
7.2.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awsdns@awsdns1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/awsdns@awsdns1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awsdns@awsdns1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awsdns@awsdns1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsdns@awsdns1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awsdns@awsdns1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awsdns@awsdns1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/awsdns@awsdns1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsdns@awsdns1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awsdns@awsdns1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awsdns@awsdns1/deact/preaction/account --set <Exec User>
-
7.2.2.4. Details¶
-
Common Hosted Zone ID (Within 255 bytes)
clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/hostedzoneid --set < Hosted Zone ID>
Resource Record Set Name (Within 255 bytes)
clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/recordset --set <Resource Record Set Name>
IP Address
clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/ip --set <IP Address>
TTL (sec)
Default, 300 (minimum, 0; maximum, 2147483647)
clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/ttl --set <Value>
Delete a resource record set at deactivation
Delete a resource record set at deactivation
Value
Delete
1
Do not delete (default)
0
clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/delete --set <Value>
-
Tuning -
AWS CLI Timeout (sec)
Default, 100 (minimum, 1; maximum, 999)
clpcfadm.py mod -t resource/awsdns@awsdns1/parameters/awsclitimeout --set <Value>
-
-
Set Up Individually Set the following for each server.
IP Address
clpcfadm.py mod -t resource/awsdns@awsdns1/server@<Server name>/parameters/ip --set <IP Address> --nocheck
7.2.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/awsdns@awsdns1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsdns@awsdns1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsdns@awsdns1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsdns@awsdns1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsdns@awsdns1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awsdns@awsdns1/preact/default --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/predeact/default --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/postact/default --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awsdns@awsdns1/preact/path --set <File> clpcfadm.py mod -t resource/awsdns@awsdns1/predeact/path --set <File> clpcfadm.py mod -t resource/awsdns@awsdns1/postact/path --set <File> clpcfadm.py mod -t resource/awsdns@awsdns1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/awsdns@awsdns1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/awsdns@awsdns1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/awsdns@awsdns1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/awsdns@awsdns1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsdns@awsdns1/preact/timeout --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/postact/timeout --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/awsdns@awsdns1/preact/account --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/predeact/account --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/postact/account --set <Value> clpcfadm.py mod -t resource/awsdns@awsdns1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.2.3. Deleting an AWS DNS resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> awsdns awsdns1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.3. AWS Elastic IP resource¶
Note
7.3.1. Adding an AWS Elastic IP resource¶
Be sure to set the following items. For details, see "Setting AWS Elastic IP resource parameters".
Item (mandatory)
Group resource name
EIP ALLOCATION ID
ENI ID
clpcfadm.py add rsc <Name of a group to which the resource belongs> awseip awseip1 clpcfadm.py mod -t resource/awseip@awseip1/parameters/allocid --set <EIP ALLOCATION ID> clpcfadm.py mod -t resource/awseip@awseip1/parameters/eniid --set <ENI ID (Common)> clpcfadm.py mod -t resource/awseip@awseip1/server@<Server name>/parameters/eniid --set <ENI ID (Individual)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.3.2. Setting AWS Elastic IP resource parameters¶
7.3.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/awseip@awseip1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.3.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep awseip awseip1
Set a parent resource
clpcfadm.py add rscdep awseip awseip1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep awseip awseip1 ""
Delete a parent resource
clpcfadm.py mod -t resource/awseip@awseip1/depend@<Parent resource name> --delete
7.3.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awseip@awseip1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/awseip@awseip1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awseip@awseip1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awseip@awseip1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awseip@awseip1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awseip@awseip1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awseip@awseip1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/awseip@awseip1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awseip@awseip1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awseip@awseip1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awseip@awseip1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awseip@awseip1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awseip@awseip1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awseip@awseip1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awseip@awseip1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/awseip@awseip1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awseip@awseip1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awseip@awseip1/deact/preaction/account --set <Exec User>
-
7.3.2.4. Details¶
-
Common EIP ALLOCATION ID (Within 255 bytes)
clpcfadm.py mod -t resource/awseip@awseip1/parameters/allocid --set <EIP ALLOCATION ID>
ENI ID (Within 45 bytes)
clpcfadm.py mod -t resource/awseip@awseip1/parameters/eniid --set <ENI ID>
-
Tuning -
AWS CLI Timeout (sec)
Default, 100 (minimum, 1; maximum, 999)
clpcfadm.py mod -t resource/awseip@awseip1/parameters/awsclitimeout --set <Value>
-
-
Set Up Individually Set the following for each server.
ENI ID
clpcfadm.py mod -t resource/awseip@awseip1/server@<Server name>/parameters/eniid --set <ENI ID> --nocheck
7.3.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/awseip@awseip1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awseip@awseip1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awseip@awseip1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awseip@awseip1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awseip@awseip1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awseip@awseip1/preact/default --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/predeact/default --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/postact/default --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awseip@awseip1/preact/path --set <File> clpcfadm.py mod -t resource/awseip@awseip1/predeact/path --set <File> clpcfadm.py mod -t resource/awseip@awseip1/postact/path --set <File> clpcfadm.py mod -t resource/awseip@awseip1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/awseip@awseip1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/awseip@awseip1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/awseip@awseip1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/awseip@awseip1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awseip@awseip1/preact/timeout --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/postact/timeout --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/awseip@awseip1/preact/account --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/predeact/account --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/postact/account --set <Value> clpcfadm.py mod -t resource/awseip@awseip1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.3.3. Deleting an AWS Elastic IP resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> awseip awseip1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.4. AWS Secondary IP resource¶
Note
7.4.1. Adding an AWS Secondary IP resource¶
Be sure to set the following items. For details, see "Setting AWS Secondary IP resource parameters".
Item (mandatory)
Group resource name
IP Address
ENI ID
clpcfadm.py add rsc <Name of a group to which the resource belongs> awssip awssip1 clpcfadm.py mod -t resource/awssip@awssip1/parameters/ip --set <IP Address> clpcfadm.py mod -t resource/awssip@awssip1/parameters/eniid --set <ENI ID (Common)> clpcfadm.py mod -t resource/awssip@awssip1/server@<Server name>/parameters/eniid --set <ENI ID (Individual)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.4.2. Setting AWS Secondary IP resource parameters¶
7.4.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/awssip@awssip1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.4.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep awssip awssip1
Set a parent resource
clpcfadm.py add rscdep awssip awssip1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep awssip awssip1 ""
Delete a parent resource
clpcfadm.py mod -t resource/awssip@awssip1/depend@<Parent resource name> --delete
7.4.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awssip@awssip1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/awssip@awssip1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awssip@awssip1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awssip@awssip1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awssip@awssip1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awssip@awssip1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awssip@awssip1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/awssip@awssip1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awssip@awssip1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awssip@awssip1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awssip@awssip1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awssip@awssip1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awssip@awssip1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awssip@awssip1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awssip@awssip1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/awssip@awssip1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awssip@awssip1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awssip@awssip1/deact/preaction/account --set <Exec User>
-
7.4.2.4. Details¶
-
Common IP Address
clpcfadm.py mod -t resource/awssip@awssip1/parameters/ip --set <IP Address>
ENI ID (Within 48 bytes)
clpcfadm.py mod -t resource/awssip@awssip1/parameters/eniid --set <ENI ID>
-
Tuning Start Timeout (sec)
Default, 180 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awssip@awssip1/parameters/acttimeout --set <Value>
Stop Timeout (sec)
Default, 180 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awssip@awssip1/parameters/deacttimeout --set <Value>
-
Set Up Individually Set the following for each server.
ENI ID (Within 48 bytes)
clpcfadm.py mod -t resource/awssip@awssip1/server@<Server name>/parameters/eniid --set <ENI ID> --nocheck
7.4.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/awssip@awssip1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awssip@awssip1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awssip@awssip1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awssip@awssip1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awssip@awssip1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awssip@awssip1/preact/default --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/predeact/default --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/postact/default --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awssip@awssip1/preact/path --set <File> clpcfadm.py mod -t resource/awssip@awssip1/predeact/path --set <File> clpcfadm.py mod -t resource/awssip@awssip1/postact/path --set <File> clpcfadm.py mod -t resource/awssip@awssip1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/awssip@awssip1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/awssip@awssip1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/awssip@awssip1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/awssip@awssip1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awssip@awssip1/preact/timeout --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/postact/timeout --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/awssip@awssip1/preact/account --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/predeact/account --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/postact/account --set <Value> clpcfadm.py mod -t resource/awssip@awssip1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.4.3. Deleting an AWS Secondary IP resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> awssip awssip1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.5. AWS Virtual IP resource¶
Note
7.5.1. Adding an AWS Virtual IP resource¶
Be sure to set the following items. For details, see "Setting AWS Virtual IP resource parameters".
Item (mandatory)
Group resource name
IP Address
VPC ID
ENI ID
clpcfadm.py add rsc <Name of a group to which the resource belongs> awsvip awsvip1 clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/ip --set <IP Address> clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/vpcid --set <VPC ID (Common)> clpcfadm.py mod -t resource/awsvip@awsvip1/server@<Server name>/parameters/vpcid --set <VPC ID (Individual)> --nocheck clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/eniid --set <ENI ID (Common)> clpcfadm.py mod -t resource/awsvip@awsvip1/server@<Server name>/parameters/eniid --set <ENI ID (Individual)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.5.2. Setting AWS Virtual IP resource parameters¶
7.5.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.5.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep awsvip awsvip1
Set a parent resource
clpcfadm.py add rscdep awsvip awsvip1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep awsvip awsvip1 ""
Delete a parent resource
clpcfadm.py mod -t resource/awsvip@awsvip1/depend@<Parent resource name> --delete
7.5.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awsvip@awsvip1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/awsvip@awsvip1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awsvip@awsvip1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awsvip@awsvip1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsvip@awsvip1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awsvip@awsvip1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/awsvip@awsvip1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsvip@awsvip1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awsvip@awsvip1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/awsvip@awsvip1/deact/preaction/account --set <Exec User>
-
7.5.2.4. Details¶
-
Common IP Address
clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/ip --set <IP Address>
VPC ID (Within 45 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/vpcid --set <VPC ID>
ENI ID (Within 45 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/eniid --set <ENI ID>
-
Tuning Start Timeout (sec)
Default, 300 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/acttimeout --set <Value>
Stop Timeout (sec)
Default, 60 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsvip@awsvip1/parameters/deacttimeout --set <Value>
-
Set Up Individually Set the following for each server.
VPC ID (Within 45 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/server@<Server name>/parameters/vpcid --set <VPC ID> --nocheck
ENI ID (Within 45 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/server@<Server name>/parameters/eniid --set <ENI ID> --nocheck
7.5.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/awsvip@awsvip1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsvip@awsvip1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsvip@awsvip1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsvip@awsvip1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/awsvip@awsvip1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/awsvip@awsvip1/preact/default --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/predeact/default --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/postact/default --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/awsvip@awsvip1/preact/path --set <File> clpcfadm.py mod -t resource/awsvip@awsvip1/predeact/path --set <File> clpcfadm.py mod -t resource/awsvip@awsvip1/postact/path --set <File> clpcfadm.py mod -t resource/awsvip@awsvip1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/awsvip@awsvip1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/awsvip@awsvip1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/awsvip@awsvip1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/awsvip@awsvip1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/awsvip@awsvip1/preact/timeout --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/postact/timeout --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/awsvip@awsvip1/preact/account --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/predeact/account --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/postact/account --set <Value> clpcfadm.py mod -t resource/awsvip@awsvip1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.5.3. Deleting an AWS Virtual IP resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> awsvip awsvip1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.6. Azure DNS resource¶
Note
7.6.1. Adding an Azure DNS resource¶
Be sure to set the following items. For details, see "Setting Azure DNS resource parameters".
Item (mandatory)
Group resource name
Record Set Name
Zone Name
IP Address
Resource Group Name
User URI
Tenant ID
File Path of Service Principal
Azure CLI File Path
clpcfadm.py add rsc <Name of a group to which the resource belongs> azuredns azuredns1 clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/recordset --set <Record Set Name> clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/zone --set <Zone Name> clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/ip --set <IP Address (Common)> clpcfadm.py mod -t resource/azuredns@azuredns1/server@<Server name>/parameters/ip --set <IP Address (Individual)> --nocheck clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/resourcegroup --set <Resource Group Name> clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/uri --set <User URI> clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/tenantid --set <Tenant ID> clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/certfile --set <File Path of Service Principal> clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/azurecli --set <Azure CLI File Path>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.6.2. Setting Azure DNS resource parameters¶
7.6.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.6.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep azuredns azuredns1
Set a parent resource
clpcfadm.py add rscdep azuredns azuredns1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep azuredns azuredns1 ""
Delete a parent resource
clpcfadm.py mod -t resource/azuredns@azuredns1/depend@<Parent resource name> --delete
7.6.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/azuredns@azuredns1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/azuredns@azuredns1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/azuredns@azuredns1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/azuredns@azuredns1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azuredns@azuredns1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/azuredns@azuredns1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/azuredns@azuredns1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/azuredns@azuredns1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/azuredns@azuredns1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/azuredns@azuredns1/deact/preaction/account --set <Exec User>
-
7.6.2.4. Details¶
-
Common Record Set Name (Within 253 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/recordset --set <Record Set Name>
Zone Name (Within 253 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/zone --set <Zone Name>
IP Address
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/ip --set <IP Address>
TTL (sec)
Default, 3600 (minimum, 0; maximum, 2147483647)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/ttl --set <Value>
Resource Group Name (Within 180 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/resourcegroup --set <Resource Group Name>
User URI (Within 2083 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/uri --set <User URI>
Tenant ID (Within 36 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/tenantid --set <Tenant ID>
File Path of Service Principal (Within 1023 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/certfile --set <File Path of Service Principal>
Azure CLI File Path (Within 1023 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/azurecli --set <Azure CLI File Path>
Delete a resource record set at deactivation
Delete a resource record set at deactivation
Value
Delete (default)
1
Do not delete
0
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/delete --set <Value>
-
Tuning -
Azure CLI Timeout (sec)
Default, 100 (minimum, 1; maximum, 999)
clpcfadm.py mod -t resource/azuredns@azuredns1/parameters/azureclitimeout --set <Value>
-
-
Set Up Individually Set the following for each server.
IP Address
clpcfadm.py mod -t resource/azuredns@azuredns1/server@<Server name>/parameters/ip --set <IP Address> --nocheck
7.6.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/azuredns@azuredns1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azuredns@azuredns1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azuredns@azuredns1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azuredns@azuredns1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azuredns@azuredns1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/azuredns@azuredns1/preact/default --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/predeact/default --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/postact/default --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/azuredns@azuredns1/preact/path --set <File> clpcfadm.py mod -t resource/azuredns@azuredns1/predeact/path --set <File> clpcfadm.py mod -t resource/azuredns@azuredns1/postact/path --set <File> clpcfadm.py mod -t resource/azuredns@azuredns1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/azuredns@azuredns1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/azuredns@azuredns1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/azuredns@azuredns1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/azuredns@azuredns1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/azuredns@azuredns1/preact/timeout --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/postact/timeout --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/azuredns@azuredns1/preact/account --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/predeact/account --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/postact/account --set <Value> clpcfadm.py mod -t resource/azuredns@azuredns1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.6.3. Deleting an Azure DNS resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> azuredns azuredns1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.7. Azure probe port resource¶
Note
7.7.1. Adding an Azure probe port resource¶
Be sure to set the following items. For details, see "Setting Azure probe port resource parameters".
Item (mandatory)
Group resource name
Probeport
clpcfadm.py add rsc <Name of a group to which the resource belongs> azurepp azurepp1 clpcfadm.py mod -t resource/azurepp@azurepp1/parameters/probeport --set <Probeport>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.7.2. Setting Azure probe port resource parameters¶
7.7.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/azurepp@azurepp1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.7.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep azurepp azurepp1
Set a parent resource
clpcfadm.py add rscdep azurepp azurepp1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep azurepp azurepp1 ""
Delete a parent resource
clpcfadm.py mod -t resource/azurepp@azurepp1/depend@<Parent resource name> --delete
7.7.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/azurepp@azurepp1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/azurepp@azurepp1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/azurepp@azurepp1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/azurepp@azurepp1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azurepp@azurepp1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/azurepp@azurepp1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/azurepp@azurepp1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/azurepp@azurepp1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/azurepp@azurepp1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/azurepp@azurepp1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/azurepp@azurepp1/deact/preaction/account --set <Exec User>
-
7.7.2.4. Details¶
Probeport
Default, None (minimum, 1; maximum, 65535)
clpcfadm.py mod -t resource/azurepp@azurepp1/parameters/probeport --set <Value>
-
Tuning Probe wait timeout (sec)
Default, 30 (minimum, 5; maximum, 999999999)
clpcfadm.py mod -t resource/azurepp@azurepp1/parameters/probetimeout --set <Value>
7.7.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/azurepp@azurepp1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azurepp@azurepp1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azurepp@azurepp1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azurepp@azurepp1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/azurepp@azurepp1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/azurepp@azurepp1/preact/default --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/predeact/default --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/postact/default --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/azurepp@azurepp1/preact/path --set <File> clpcfadm.py mod -t resource/azurepp@azurepp1/predeact/path --set <File> clpcfadm.py mod -t resource/azurepp@azurepp1/postact/path --set <File> clpcfadm.py mod -t resource/azurepp@azurepp1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/azurepp@azurepp1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/azurepp@azurepp1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/azurepp@azurepp1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/azurepp@azurepp1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/azurepp@azurepp1/preact/timeout --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/postact/timeout --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/azurepp@azurepp1/preact/account --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/predeact/account --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/postact/account --set <Value> clpcfadm.py mod -t resource/azurepp@azurepp1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.7.3. Deleting an Azure probe port resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> azurepp azurepp1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.8. CIFS resource¶
Note
7.8.1. Adding a CIFS resource¶
Be sure to set the following items. For details, see "Setting CIFS resource parameters".
Item (mandatory)
Group resource name
Share Name
Folder
Target Drive
Number of users with access permission
User Name
Permission
clpcfadm.py add rsc <Name of a group to which the resource belongs> cifs cifs1 clpcfadm.py mod -t resource/cifs@cifs1/parameters/sharename --set <Share Name> clpcfadm.py mod -t resource/cifs@cifs1/parameters/path --set <Folder> clpcfadm.py mod -t resource/cifs@cifs1/parameters/drive --set <Target Drive>/ clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitynum --set <Number of users with access permission> clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitylist@<ID>/name --set <User Name> clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitylist@<ID>/permissions --set <Permission>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.8.2. Setting CIFS resource parameters¶
7.8.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.8.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep cifs cifs1
Set a parent resource
clpcfadm.py add rscdep cifs cifs1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep cifs cifs1 ""
Delete a parent resource
clpcfadm.py mod -t resource/cifs@cifs1/depend@<Parent resource name> --delete
7.8.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/cifs@cifs1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/cifs@cifs1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/cifs@cifs1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/cifs@cifs1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/cifs@cifs1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/cifs@cifs1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/cifs@cifs1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/cifs@cifs1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/cifs@cifs1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/cifs@cifs1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/cifs@cifs1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/cifs@cifs1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/cifs@cifs1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/cifs@cifs1/deact/preaction/account --set <Exec User>
-
7.8.2.4. Details¶
Execute the automatic saving of shared configuration of drive
Execute the automatic saving of shared configuration of drive
Value
Yes
1
No (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/parameters/driveadmin --set <Value>
Note
To set the following items, set "Execute the automatic saving of shared configuration of drive" to "Yes" in advance.
Target Drive
Value
A: (default)
B:
C:
D:
E:
F:
G:
H:
I:
J:
K:
L:
M:
N:
O:
P:
Q:
R:
S:
T:
U:
V:
W:
X:
Y:
Z:
clpcfadm.py mod -t resource/cifs@cifs1/parameters/drive --set <Value>Shared Configuration File (Within 255 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/parameters/filepath --set <Shared Configuration File>Errors in restoring file share setting are treated as activity failure
Errors in restoring file share setting are treated as activity failure
Value
Yes
1
No (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/parameters/errorcheck --set <Value>
Note
To set the following items, set "Execute the automatic saving of shared configuration of drive" to "No" in advance.
Share Name (Within 79 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/parameters/sharename --set <Share Name>Folder (Within 255 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/parameters/path --set <Folder>Comment (Within 255 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/parameters/comment --set <Comment>
When folder is shared not as activity failure
When folder is shared not as activity failure
Value
Yes
0
No (default)
1
clpcfadm.py mod -t resource/cifs@cifs1/parameters/alreadyshared --set <Value>
-
Tuning Note
To set the following items, set "Execute the automatic saving of shared configuration of drive" to "No" in advance.
-
Cache Allow Caching
Allow Caching
Value
Allow (default)
1
Do not allow
0
clpcfadm.py mod -t resource/cifs@cifs1/parameters/csc --set <Value>
Caching setting
Caching setting
Value
Automatic Caching (default)
0
Manual Caching
1
Automatic Caching (Optimized for performance)
2
clpcfadm.py mod -t resource/cifs@cifs1/parameters/cscmethod --set <Value>
-
User User Limit
Default, 0 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/cifs@cifs1/parameters/userlimit --set <Value>
Note
If you change the "User Limit" setting to "Infinite", set 0.
Permissions
-
Add clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitynum --set <Number of users> clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitylist@<ID>/name --set <User Name> --nocheck clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitylist@<ID>/permissions --set <Permission> --nocheck
Note
Set "Permission" to any of the following values:
Permission
Value
None (default)
0
Read
1
Change
2
Full Control
3
Note
With only one limited user, specify 0 for ID.With more than one limited user, specify consecutive numbers (e.g., 0, 1, 2...).
-
Delete clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitynum --set <Number of users after deletion> clpcfadm.py mod -t resource/cifs@cifs1/parameters/securitylist@<ID> --delete
-
-
7.8.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/cifs@cifs1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/cifs@cifs1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/cifs@cifs1/preact/default --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/predeact/default --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/postact/default --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/cifs@cifs1/preact/path --set <File> clpcfadm.py mod -t resource/cifs@cifs1/predeact/path --set <File> clpcfadm.py mod -t resource/cifs@cifs1/postact/path --set <File> clpcfadm.py mod -t resource/cifs@cifs1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/cifs@cifs1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/cifs@cifs1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/cifs@cifs1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/cifs@cifs1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/cifs@cifs1/preact/timeout --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/postact/timeout --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/cifs@cifs1/preact/account --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/predeact/account --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/postact/account --set <Value> clpcfadm.py mod -t resource/cifs@cifs1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.8.3. Deleting a CIFS resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> cifs cifs1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.9. Dynamic DNS resource¶
Note
7.9.1. Adding a dynamic DNS resource¶
Be sure to set the following items. For details, see "Setting dynamic DNS resource parameters".
Item (mandatory)
Group resource name
Virtual Host Name
IP Address
DDNS Server
clpcfadm.py add rsc <Name of a group to which the resource belongs> ddns ddns1 clpcfadm.py mod -t resource/ddns@ddns1/parameters/host/ddnsname --set <Virtual Host Name> clpcfadm.py mod -t resource/ddns@ddns1/parameters/host/ip --set <IP Address> clpcfadm.py mod -t resource/ddns@ddns1/parameters/dnsserver/name --set <DDNS Server>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.9.2. Setting dynamic DNS resource parameters¶
7.9.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/ddns@ddns1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.9.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep ddns ddns1
Set a parent resource
clpcfadm.py add rscdep ddns ddns1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep ddns ddns1 ""
Delete a parent resource
clpcfadm.py mod -t resource/ddns@ddns1/depend@<Parent resource name> --delete
7.9.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ddns@ddns1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/ddns@ddns1/act/mode --set <Value>
Failover Threshold
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ddns@ddns1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/ddns@ddns1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ddns@ddns1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ddns@ddns1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/ddns@ddns1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ddns@ddns1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/ddns@ddns1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ddns@ddns1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/ddns@ddns1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ddns@ddns1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ddns@ddns1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/ddns@ddns1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ddns@ddns1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/ddns@ddns1/deact/preaction/account --set <Exec User>
-
7.9.2.4. Details¶
-
Common Virtual Host Name (Within 255 bytes)
clpcfadm.py mod -t resource/ddns@ddns1/parameters/host/ddnsname --set <Virtual Host Name>
IP Address
clpcfadm.py mod -t resource/ddns@ddns1/parameters/host/ip --set <IP Address>
DDNS Server (Within 255 bytes)
clpcfadm.py mod -t resource/ddns@ddns1/parameters/dnsserver/name --set <DDNS Server>
Port No.
Default, 53 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t resource/ddns@ddns1/parameters/dnsserver/port --set <Value>
Cache TTL (sec)
Default, 0 (minimum, 0; maximum, 2147483647)
clpcfadm.py mod -t resource/ddns@ddns1/parameters/host/recordttl --set <Value>
Execute Dynamic Update Periodically
Execute Dynamic Update Periodically
Value
Yes (default)
1
No
0
clpcfadm.py mod -t resource/ddns@ddns1/parameters/dynamicupdate --set <Value>
Update Interval (sec)
Default, 3600 (minimum, 60; maximum, 599940)
clpcfadm.py mod -t resource/ddns@ddns1/parameters/ddnsinterval --set <Value>
Note
Set as above with "Execute Dynamic Update Periodically" set to "Yes".
Note
Specify a value in seconds (divisible by 60).
Delete the Registered IP Address
Delete the Registered IP Address
Value
Delete
1
Do not delete (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/parameters/registeripdelete --set <Value>
Kerberos Authentication
Kerberos Authentication
Value
Authenticate
1
Do not authenticate (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/parameters/kerberosregister --set <Value>
-
Set Up Individually Set the following for each server.
IP Address
clpcfadm.py mod -t resource/ddns@ddns1/server@<Server name>/parameters/host/ip --set <IP Address> --nocheck
Note
To return to the common settings, set the following for each server.
clpcfadm.py mod -t resource/ddns@ddns1/server@<Server name> --delete
7.9.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/ddns@ddns1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ddns@ddns1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ddns@ddns1/preact/default --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/predeact/default --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/postact/default --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ddns@ddns1/preact/path --set <File> clpcfadm.py mod -t resource/ddns@ddns1/predeact/path --set <File> clpcfadm.py mod -t resource/ddns@ddns1/postact/path --set <File> clpcfadm.py mod -t resource/ddns@ddns1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/ddns@ddns1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/ddns@ddns1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/ddns@ddns1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/ddns@ddns1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ddns@ddns1/preact/timeout --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/postact/timeout --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/ddns@ddns1/preact/account --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/predeact/account --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/postact/account --set <Value> clpcfadm.py mod -t resource/ddns@ddns1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.9.3. Deleting a dynamic DNS resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> ddns ddns1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.10. Floating IP resource¶
Note
7.10.1. Adding a floating IP resource¶
Be sure to set the following items. For details, see "Setting floating IP resource parameters".
Item (mandatory)
Group resource name
IP Address
clpcfadm.py add rsc <Name of a group to which the resource belongs> fip fip1 clpcfadm.py mod -t resource/fip@fip1/parameters/ip --set <IP Address>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.10.2. Setting floating IP resource parameters¶
7.10.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/fip@fip1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.10.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep fip fip1
Set a parent resource
clpcfadm.py add rscdep fip fip1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep fip fip1 ""
Delete a parent resource
clpcfadm.py mod -t resource/fip@fip1/depend@<Parent resource name> --delete
7.10.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/fip@fip1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/fip@fip1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/fip@fip1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/fip@fip1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/fip@fip1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/fip@fip1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/fip@fip1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/fip@fip1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/fip@fip1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/fip@fip1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/fip@fip1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/fip@fip1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/fip@fip1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/fip@fip1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/fip@fip1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/fip@fip1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/fip@fip1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/fip@fip1/deact/preaction/account --set <Exec User>
-
7.10.2.4. Details¶
-
Common IP Address
clpcfadm.py mod -t resource/fip@fip1/parameters/ip --set <IP Address>
-
Tuning Run Ping
Run Ping
Value
Yes (default)
1
No
0
clpcfadm.py mod -t resource/fip@fip1/parameters/pingexec --set <Value>
Note
To set the following items, set "Run Ping" to "Yes" in advance.
-
ping Interval (sec)
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t resource/fip@fip1/parameters/pinginterval --set <Value>
Timeout (msec)
Default, 1000 (minimum, 1; maximum, 999999)
clpcfadm.py mod -t resource/fip@fip1/parameters/pingtimeout --set <Value>
Retry Count
Default, 5 (minimum, 0; maximum, 999)
clpcfadm.py mod -t resource/fip@fip1/parameters/pingretry --set <Value>
Judge NIC Link Down as Failure
Judge NIC Link Down as Failure
Value
Yes
1
No (default)
0
clpcfadm.py mod -t resource/fip@fip1/parameters/monmii --set <Value>
Use transmission source change feature
Use transmission source change feature
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t resource/fip@fip1/parameters/srcip/use --set <Value>
Specification for transmission source
Specification for transmission source
Value
Specify FIP as the transmission source (default)
0
Do not specify FIP as the transmission source
1
clpcfadm.py mod -t resource/fip@fip1/parameters/srcip/src --set <Value>
Note
Set as above with "Use transmission source change feature" set to "Use".
-
-
Set Up Individually Set the following for each server.
IP Address
clpcfadm.py mod -t resource/fip@fip1/server@<Server name>/parameters/ip --set <IP Address> --nocheck
Note
To return to the common settings, set the following for each server.
clpcfadm.py mod -t resource/fip@fip1/server@<Server name> --delete
7.10.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/fip@fip1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/fip@fip1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/fip@fip1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/fip@fip1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/fip@fip1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/fip@fip1/preact/default --set <Value> clpcfadm.py mod -t resource/fip@fip1/predeact/default --set <Value> clpcfadm.py mod -t resource/fip@fip1/postact/default --set <Value> clpcfadm.py mod -t resource/fip@fip1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/fip@fip1/preact/path --set <File> clpcfadm.py mod -t resource/fip@fip1/predeact/path --set <File> clpcfadm.py mod -t resource/fip@fip1/postact/path --set <File> clpcfadm.py mod -t resource/fip@fip1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/fip@fip1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/fip@fip1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/fip@fip1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/fip@fip1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/fip@fip1/preact/timeout --set <Value> clpcfadm.py mod -t resource/fip@fip1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/fip@fip1/postact/timeout --set <Value> clpcfadm.py mod -t resource/fip@fip1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/fip@fip1/preact/account --set <Value> clpcfadm.py mod -t resource/fip@fip1/predeact/account --set <Value> clpcfadm.py mod -t resource/fip@fip1/postact/account --set <Value> clpcfadm.py mod -t resource/fip@fip1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.10.3. Deleting a floating IP resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> fip fip1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.11. Google Cloud DNS resource¶
Note
7.11.1. Adding a Google Cloud DNS resource¶
Be sure to set the following items. For details, see "Setting Google Cloud DNS resource parameters".
Item (mandatory)
Group resource name
Zone Name
DNS Name
IP Address
clpcfadm.py add rsc <Name of a group to which the resource belongs> gcdns gcdns1 clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/zone_name --set <Zone Name> clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/dns_name --set <DNS Name> clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/record_ip --set <IP Address (Common)> clpcfadm.py mod -t resource/gcdns@gcdns1/server@<Server name>/parameters/record_ip --set <IP Address (Individual)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.11.2. Setting Google Cloud DNS resource parameters¶
7.11.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/gcdns@gcdns1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.11.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep gcdns gcdns1
Set a parent resource
clpcfadm.py add rscdep gcdns gcdns1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep gcdns gcdns1 ""
Delete a parent resource
clpcfadm.py mod -t resource/gcdns@gcdns1/depend@<Parent resource name> --delete
7.11.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/gcdns@gcdns1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/gcdns@gcdns1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/gcdns@gcdns1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/gcdns@gcdns1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcdns@gcdns1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/gcdns@gcdns1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/gcdns@gcdns1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/gcdns@gcdns1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/gcdns@gcdns1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/gcdns@gcdns1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/gcdns@gcdns1/deact/preaction/account --set <Exec User>
-
7.11.2.4. Details¶
-
Common Zone Name (Within 63 bytes)
clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/zone_name --set <Zone Name>
DNS Name (Within 253 bytes)
clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/dns_name --set <DNS Name>
IP Address
clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/record_ip --set <IP Address>
TTL (sec)
Default, 300 (minimum, 0; maximum, 2147483647)
clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/record_ttl --set <Value>
Delete the record at deactivation
Delete the record at deactivation
Value
Delete (default)
1
Do not delete
0
clpcfadm.py mod -t resource/gcdns@gcdns1/parameters/delete --set <Value>
-
Set Up Individually Set the following for each server.
IP Address
clpcfadm.py mod -t resource/gcdns@gcdns1/server@<Server name>/parameters/record_ip --set <IP Address> --nocheck
7.11.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/gcdns@gcdns1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcdns@gcdns1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcdns@gcdns1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcdns@gcdns1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcdns@gcdns1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/gcdns@gcdns1/preact/default --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/predeact/default --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/postact/default --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/gcdns@gcdns1/preact/path --set <File> clpcfadm.py mod -t resource/gcdns@gcdns1/predeact/path --set <File> clpcfadm.py mod -t resource/gcdns@gcdns1/postact/path --set <File> clpcfadm.py mod -t resource/gcdns@gcdns1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/gcdns@gcdns1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/gcdns@gcdns1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/gcdns@gcdns1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/gcdns@gcdns1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/gcdns@gcdns1/preact/timeout --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/postact/timeout --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/gcdns@gcdns1/preact/account --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/predeact/account --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/postact/account --set <Value> clpcfadm.py mod -t resource/gcdns@gcdns1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.11.3. Deleting a Google Cloud DNS resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> gcdns gcdns1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.12. Google Cloud Virtual IP resource¶
Note
7.12.1. Adding a Google Cloud Virtual IP resource¶
Be sure to set the following items. For details, see "Setting Google Cloud Virtual IP resource parameters".
Item (mandatory)
Group resource name
Port Number
clpcfadm.py add rsc <Name of a group to which the resource belongs> gcvip gcvip1 clpcfadm.py mod -t resource/gcvip@gcvip1/parameters/probeport --set <Port Number>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.12.2. Setting Google Cloud Virtual IP resource parameters¶
7.12.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/gcvip@gcvip1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.12.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep gcvip gcvip1
Set a parent resource
clpcfadm.py add rscdep gcvip gcvip1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep gcvip gcvip1 ""
Delete a parent resource
clpcfadm.py mod -t resource/gcvip@gcvip1/depend@<Parent resource name> --delete
7.12.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/gcvip@gcvip1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/gcvip@gcvip1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/gcvip@gcvip1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/gcvip@gcvip1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcvip@gcvip1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/gcvip@gcvip1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/gcvip@gcvip1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/gcvip@gcvip1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/gcvip@gcvip1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/gcvip@gcvip1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/gcvip@gcvip1/deact/preaction/account --set <Exec User>
-
7.12.2.4. Details¶
Port Number
Default, None (minimum, 1; maximum, 65535)
clpcfadm.py mod -t resource/gcvip@gcvip1/parameters/probeport --set <Value>
-
Tuning Health Check Timeout (sec)
Default, 30 (minimum, 5; maximum, 999999999)
clpcfadm.py mod -t resource/gcvip@gcvip1/parameters/probetimeout --set <Value>
7.12.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/gcvip@gcvip1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcvip@gcvip1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcvip@gcvip1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcvip@gcvip1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/gcvip@gcvip1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/gcvip@gcvip1/preact/default --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/predeact/default --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/postact/default --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/gcvip@gcvip1/preact/path --set <File> clpcfadm.py mod -t resource/gcvip@gcvip1/predeact/path --set <File> clpcfadm.py mod -t resource/gcvip@gcvip1/postact/path --set <File> clpcfadm.py mod -t resource/gcvip@gcvip1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/gcvip@gcvip1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/gcvip@gcvip1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/gcvip@gcvip1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/gcvip@gcvip1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/gcvip@gcvip1/preact/timeout --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/postact/timeout --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/gcvip@gcvip1/preact/account --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/predeact/account --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/postact/account --set <Value> clpcfadm.py mod -t resource/gcvip@gcvip1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.12.3. Deleting a Google Cloud Virtual IP resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> gcvip gcvip1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.13. Hybrid disk resource¶
Note
7.13.1. Adding a hybrid disk resource¶
Be sure to set the following items. For details, see "Setting hybrid disk resource parameters".
Item (mandatory)
Group resource name
Data Partition Drive Letter
GUID (data partition)
Cluster Partition Drive Letter
GUID (cluster partition)
Mirror Disk Connect
clpcfadm.py add rsc <Name of a group to which the resource belongs> hd hd1 clpcfadm.py mod -t resource/hd@hd1/parameters/volumemountpoint --set <Data Partition Drive Letter> clpcfadm.py mod -t resource/hd@hd1/server@<Server name>/parameters/volumeguid --set <GUID (data partition)> --nocheck clpcfadm.py mod -t resource/hd@hd1/parameters/cpvolumemountpoint --set <Cluster Partition Drive Letter> clpcfadm.py mod -t resource/hd@hd1/server@<Server name>/parameters/cpvolumeguid --set <GUID (cluster partition)> --nocheck clpcfadm.py mod -t resource/hd@hd1/parameters/netdev@<ID>/device --set <Mirror Disk Connect (Device ID)> --nocheck clpcfadm.py mod -t resource/hd@hd1/parameters/netdev@<ID>/mdcname --set <Mirror Disk Connect (Name)> --nocheck clpcfadm.py mod -t resource/hd@hd1/parameters/netdev@<ID>/priority --set <Mirror Disk Connect (Priority)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.13.2. Setting hybrid disk resource parameters¶
7.13.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/hd@hd1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.13.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep hd hd1
Set a parent resource
clpcfadm.py add rscdep hd hd1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep hd hd1 ""
Delete a parent resource
clpcfadm.py mod -t resource/hd@hd1/depend@<Parent resource name> --delete
7.13.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/hd@hd1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/hd@hd1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/hd@hd1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/hd@hd1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/hd@hd1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/hd@hd1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/hd@hd1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/hd@hd1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/hd@hd1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/hd@hd1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/hd@hd1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/hd@hd1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/hd@hd1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/hd@hd1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/hd@hd1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/hd@hd1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/hd@hd1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/hd@hd1/deact/preaction/account --set <Exec User>
-
7.13.2.4. Details¶
Hybrid Disk No.
Value
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
clpcfadm.py mod -t resource/hd@hd1/parameters/hdindex --set <Value>
Data Partition Drive Letter
clpcfadm.py mod -t resource/hd@hd1/parameters/volumemountpoint --set <Data Partition Drive Letter>
GUID (data partition)
clpcfadm.py mod -t resource/hd@hd1/server@<Server name>/parameters/volumeguid --set <GUID (data partition)> --nocheck
Note
The GUID can be retrieved by using the clpdiskctrl command.For details, see "clpdiskctrl command".Cluster Partition Drive Letter
clpcfadm.py mod -t resource/hd@hd1/parameters/cpvolumemountpoint --set <Cluster Partition Drive Letter>
GUID (cluster partition)
clpcfadm.py mod -t resource/hd@hd1/server@<Server name>/parameters/cpvolumeguid --set <GUID (cluster partition)> --nocheck
Note
The GUID can be retrieved by using the clpdiskctrl command.For details, see "clpdiskctrl command".Cluster Partition Offset Index
Value
0 (default)
1
2
3
4
5
6
7
clpcfadm.py mod -t resource/hd@hd1/parameters/cpvolumeoffsetindex --set <Value>
Mirror Disk Connect
Value (Mirror disk connect [name])
Value (Mirror disk connect [device ID])
mdc1
400
mdc2
401
mdc3
402
mdc4
403
mdc5
404
mdc6
405
mdc7
406
mdc8
407
mdc9
408
mdc10
409
mdc11
410
mdc12
411
mdc13
412
mdc14
413
mdc15
414
mdc16
415
clpcfadm.py mod -t resource/hd@hd1/parameters/netdev@<ID>/device --set <Value (Mirror disk connect [device ID])> --nocheck clpcfadm.py mod -t resource/hd@hd1/parameters/netdev@<ID>/mdcname --set <Value (Mirror disk connect [name])> --nocheck clpcfadm.py mod -t resource/hd@hd1/parameters/netdev@<ID>/priority --set <Mirror Disk Connect (Priority)> --nocheck
Note
With only one mirror disk connect, specify 0 for ID.With more than one mirror disk connect, specify consecutive numbers (e.g., 0, 1, 2...).Note
With only one mirror disk connect, specify 1 for Priority.With more than one mirror disk connect, specify consecutive numbers (e.g., 1, 2, 3...) in order of priority.
-
Tuning Execute the initial mirror construction
Execute the initial mirror construction
Value
Yes (default)
1
No
0
clpcfadm.py mod -t resource/hd@hd1/parameters/fullcopy --set <Value>
Mirror Connect Timeout (sec)
Default, 20 (minimum, 2; maximum, 9999)
clpcfadm.py mod -t resource/hd@hd1/parameters/mirrorconnecttimeout --set <Value>
Request Queue Maximum Size (KB)
Default, 2048 (minimum, 512; maximum, 65535)
clpcfadm.py mod -t resource/hd@hd1/parameters/requestqueuesize --set <Value>
-
Mode Mode
Mode
Value
Synchronous (default)
1
Asynchronous
0
clpcfadm.py mod -t resource/hd@hd1/parameters/syncmode --set <Value>
Note
To set the following items, set "Mode" to "Asynchronous" in advance.
Kernel Queue Size (KB)
Default, 2048 (minimum, 512; maximum, 65535)
clpcfadm.py mod -t resource/hd@hd1/parameters/kequeuesize --set <Value>
Application Queue Size (KB)
Default, 2048 (minimum, 512; maximum, 65535)
clpcfadm.py mod -t resource/hd@hd1/parameters/apqueuesize --set <Value>
Limit rate of Mirror Connect
Rate Limit (KB/sec)
Default, 0 (minimum, 0; maximum, 999999999)
clpcfadm.py mod -t resource/hd@hd1/parameters/bandlimit --set <Value>
Note
If you do not limit the communication bandwidth, specify 0.
clpcfadm.py mod -t resource/hd@hd1/parameters/bandlimit --set 0
Thread Timeout (sec)
Default, 0 (minimum, 2; maximum, 9999)
clpcfadm.py mod -t resource/hd@hd1/parameters/apthreadtimeout --set <Value>
History Files Store Folder (Within 1023 bytes)
clpcfadm.py mod -t resource/hd@hd1/parameters/historydir --set <History Files Store Folder>
Limit size of History File
Size Limit (MB)
Default, 0 (minimum, 0; maximum, 999999999)
clpcfadm.py mod -t resource/hd@hd1/parameters/historymax --set <Value>
Note
If you do not limit the history file size, specify 0.
clpcfadm.py mod -t resource/hd@hd1/parameters/historymax --set 0
Compress Data
Compress Data
Value
Compress data in normal operation
1
Compress data in recovery operation
2
Compress data in normal and recovery operation
3
Do not compress (default)
0
clpcfadm.py mod -t resource/hd@hd1/parameters/compress --set <Value>
Important
You cannot specify "Compress data in normal operation" or "Compress data in normal and recovery operation", with "Synchronize data" set to "Synchronize".
-
Recovery Method Compress Data When Recovering
Compress Data When Recovering
Value
Compress data in normal operation
1
Compress data in recovery operation
2
Compress data in normal and recovery operation
3
Do not compress (default)
0
clpcfadm.py mod -t resource/hd@hd1/parameters/compress --set <Value>
Important
You cannot specify "Compress data in normal operation" or "Compress data in normal and recovery operation", with "Synchronize data" set to "Synchronize".
-
Mirror Communication Encryption Encrypt mirror communication
Encrypt mirror communication
Value
Encrypt
1
Do not encrypt (default)
0
clpcfadm.py mod -t resource/hd@hd1/parameters/crypto/use --set <Value>
Key File Path (Within 1023 bytes)
clpcfadm.py mod -t resource/hd@hd1/parameters/crypto/keyfile --set <Key File Path>
Note
Set as above with "Encrypt mirror communication" set to "Encrypt".
7.13.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/hd@hd1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/hd@hd1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/hd@hd1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/hd@hd1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/hd@hd1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/hd@hd1/preact/default --set <Value> clpcfadm.py mod -t resource/hd@hd1/predeact/default --set <Value> clpcfadm.py mod -t resource/hd@hd1/postact/default --set <Value> clpcfadm.py mod -t resource/hd@hd1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/hd@hd1/preact/path --set <File> clpcfadm.py mod -t resource/hd@hd1/predeact/path --set <File> clpcfadm.py mod -t resource/hd@hd1/postact/path --set <File> clpcfadm.py mod -t resource/hd@hd1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/hd@hd1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/hd@hd1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/hd@hd1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/hd@hd1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/hd@hd1/preact/timeout --set <Value> clpcfadm.py mod -t resource/hd@hd1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/hd@hd1/postact/timeout --set <Value> clpcfadm.py mod -t resource/hd@hd1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/hd@hd1/preact/account --set <Value> clpcfadm.py mod -t resource/hd@hd1/predeact/account --set <Value> clpcfadm.py mod -t resource/hd@hd1/postact/account --set <Value> clpcfadm.py mod -t resource/hd@hd1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.13.3. Deleting a hybrid disk resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> hd hd1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.14. Mirror disk resource¶
Note
7.14.1. Adding a mirror disk resource¶
Be sure to set the following items. For details, see "Setting mirror disk resource parameters".
Item (mandatory)
Group resource name
Data Partition Drive Letter
GUID (data partition)
Cluster Partition Drive Letter
GUID (cluster partition)
Mirror Disk Connect
clpcfadm.py add rsc <Name of a group to which the resource belongs> md md1 clpcfadm.py mod -t resource/md@md1/parameters/volumemountpoint --set <Data Partition Drive Letter> clpcfadm.py mod -t resource/md@md1/server@<Server name>/parameters/volumeguid --set <GUID (data partition)> --nocheck clpcfadm.py mod -t resource/md@md1/parameters/cpvolumemountpoint --set <Cluster Partition Drive Letter> clpcfadm.py mod -t resource/md@md1/server@<Server name>/parameters/cpvolumeguid --set <GUID (cluster partition)> --nocheck clpcfadm.py mod -t resource/md@md1/parameters/netdev@<ID>/device --set <Mirror Disk Connect (Device ID)> --nocheck clpcfadm.py mod -t resource/md@md1/parameters/netdev@<ID>/mdcname --set <Mirror Disk Connect (Name)> --nocheck clpcfadm.py mod -t resource/md@md1/parameters/netdev@<ID>/priority --set <Mirror Disk Connect (Priority)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.14.2. Setting mirror disk resource parameters¶
7.14.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/md@md1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.14.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep md md1
Set a parent resource
clpcfadm.py add rscdep md md1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep md md1 ""
Delete a parent resource
clpcfadm.py mod -t resource/md@md1/depend@<Parent resource name> --delete
7.14.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/md@md1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/md@md1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/md@md1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/md@md1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/md@md1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/md@md1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/md@md1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/md@md1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/md@md1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/md@md1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/md@md1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/md@md1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/md@md1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/md@md1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/md@md1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/md@md1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/md@md1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/md@md1/deact/preaction/account --set <Exec User>
-
7.14.2.4. Details¶
Mirror Disk No.
Value
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
clpcfadm.py mod -t resource/md@md1/parameters/nmpindex --set <Value>
Data Partition Drive Letter
clpcfadm.py mod -t resource/md@md1/parameters/volumemountpoint --set <Data Partition Drive Letter>
GUID (data partition)
clpcfadm.py mod -t resource/md@md1/server@<Server name>/parameters/volumeguid --set <GUID (data partition)> --nocheck
Note
The GUID can be retrieved by using the clpdiskctrl command.For details, see "clpdiskctrl command".Cluster Partition Drive Letter
clpcfadm.py mod -t resource/md@md1/parameters/cpvolumemountpoint --set <Cluster Partition Drive Letter>
GUID (cluster partition)
clpcfadm.py mod -t resource/md@md1/server@<Server name>/parameters/cpvolumeguid --set <GUID (cluster partition)> --nocheck
Note
The GUID can be retrieved by using the clpdiskctrl command.For details, see "clpdiskctrl command".Cluster Partition Offset Index
Value
0 (default)
1
2
3
4
5
6
7
clpcfadm.py mod -t resource/md@md1/parameters/cpvolumeoffsetindex --set <Value>
Mirror Disk Connect
Value (Mirror disk connect [name])
Value (Mirror disk connect [device ID])
mdc1
400
mdc2
401
mdc3
402
mdc4
403
mdc5
404
mdc6
405
mdc7
406
mdc8
407
mdc9
408
mdc10
409
mdc11
410
mdc12
411
mdc13
412
mdc14
413
mdc15
414
mdc16
415
clpcfadm.py mod -t resource/md@md1/parameters/netdev@<ID>/device --set <Value (Mirror disk connect [device ID]))> --nocheck clpcfadm.py mod -t resource/md@md1/parameters/netdev@<ID>/mdcname --set <Value (Mirror disk connect [name])> --nocheck clpcfadm.py mod -t resource/md@md1/parameters/netdev@<ID>/priority --set <Mirror Disk Connect (Priority)> --nocheck
Note
With only one mirror disk connect, specify 0 for ID.With more than one mirror disk connect, specify consecutive numbers (e.g., 0, 1, 2...).Note
With only one mirror disk connect, specify 1 for Priority.With more than one mirror disk connect, specify consecutive numbers (e.g., 1, 2, 3...) in order of priority.
-
Tuning Execute the initial mirror construction
Execute the initial mirror construction
Value
Yes (default)
1
No
0
clpcfadm.py mod -t resource/md@md1/parameters/fullcopy --set <Value>
Mirror Connect Timeout (sec)
Default, 20 (minimum, 2; maximum, 9999)
clpcfadm.py mod -t resource/md@md1/parameters/mirrorconnecttimeout --set <Value>
Request Queue Maximum Size (KB)
Default, 2048 (minimum, 512; maximum, 65535)
clpcfadm.py mod -t resource/md@md1/parameters/requestqueuesize --set <Value>
-
Mode Mode
Mode
Value
Synchronous (default)
1
Asynchronous
0
clpcfadm.py mod -t resource/md@md1/parameters/syncmode --set <Value>
Note
To set the following items, set "Mode" to "Asynchronous" in advance.
Kernel Queue Size (KB)
Default, 2048 (minimum, 512; maximum, 65535)
clpcfadm.py mod -t resource/md@md1/parameters/kequeuesize --set <Value>
Application Queue Size (KB)
Default, 2048 (minimum, 512; maximum, 65535)
clpcfadm.py mod -t resource/md@md1/parameters/apqueuesize --set <Value>
Limit rate of Mirror Connect
Rate Limit (KB/sec)
Default, 0 (minimum, 0; maximum, 999999999)
clpcfadm.py mod -t resource/md@md1/parameters/bandlimit --set <Value>
Note
If you do not limit the communication bandwidth, specify 0.
clpcfadm.py mod -t resource/md@md1/parameters/bandlimit --set 0
Thread Timeout (sec)
Default, 0 (minimum, 2; maximum, 9999)
clpcfadm.py mod -t resource/md@md1/parameters/apthreadtimeout --set <Value>
History Files Store Folder (Within 1023 bytes)
clpcfadm.py mod -t resource/md@md1/parameters/historydir --set <History Files Store Folder>
Limit size of History File
Size Limit (MB)
Default, 0 (minimum, 1; maximum, 999999999)
clpcfadm.py mod -t resource/md@md1/parameters/historymax --set <Value>
Note
If you do not limit the history file size, specify 0.
clpcfadm.py mod -t resource/md@md1/parameters/historymax --set 0
Compress Data
Compress Data
Value
Compress data in normal operation
1
Compress data in recovery operation
2
Compress data in normal and recovery operation
3
Do not compress (default)
0
clpcfadm.py mod -t resource/md@md1/parameters/compress --set <Value>
Important
You cannot specify "Compress data in normal operation" or "Compress data in normal and recovery operation", with "Synchronize data" set to "Synchronize".
-
Recovery Method Compress Data When Recovering
Compress Data When Recovering
Value
Compress data in normal operation
1
Compress data in recovery operation
2
Compress data in normal and recovery operation
3
Do not compress (default)
0
clpcfadm.py mod -t resource/md@md1/parameters/compress --set <Value>
Important
You cannot specify "Compress data in normal operation" or "Compress data in normal and recovery operation", with "Synchronize data" set to "Synchronize".
-
Mirror Communication Encryption Encrypt mirror communication
Encrypt mirror communication
Value
Encrypt
1
Do not encrypt (default)
0
clpcfadm.py mod -t resource/md@md1/parameters/crypto/use --set <Value>
Key File Path (Within 1023 bytes)
clpcfadm.py mod -t resource/md@md1/parameters/crypto/keyfile --set <Key File Path>
Note
Set as above with "Encrypt mirror communication" set to "Encrypt".
7.14.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/md@md1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/md@md1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/md@md1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/md@md1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/md@md1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/md@md1/preact/default --set <Value> clpcfadm.py mod -t resource/md@md1/predeact/default --set <Value> clpcfadm.py mod -t resource/md@md1/postact/default --set <Value> clpcfadm.py mod -t resource/md@md1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/md@md1/preact/path --set <File> clpcfadm.py mod -t resource/md@md1/predeact/path --set <File> clpcfadm.py mod -t resource/md@md1/postact/path --set <File> clpcfadm.py mod -t resource/md@md1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/md@md1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/md@md1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/md@md1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/md@md1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/md@md1/preact/timeout --set <Value> clpcfadm.py mod -t resource/md@md1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/md@md1/postact/timeout --set <Value> clpcfadm.py mod -t resource/md@md1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/md@md1/preact/account --set <Value> clpcfadm.py mod -t resource/md@md1/predeact/account --set <Value> clpcfadm.py mod -t resource/md@md1/postact/account --set <Value> clpcfadm.py mod -t resource/md@md1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.14.3. Deleting a mirror disk resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> md md1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.15. Oracle Cloud DNS resource¶
Note
7.15.1. Adding an Oracle Cloud DNS resource¶
Be sure to set the following items. For details, see "Setting Oracle Cloud DNS resource parameters".
Item (mandatory)
Group resource name
Region
Domain (FQDN)
Zone OCID
IP Address
clpcfadm.py add rsc <Name of a group to which the resource belongs> ocdns ocdns1 clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/region --set <Region (Common)> clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/domain --set <Domain (FQDN)> clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/zoneid --set <Zone OCID (Common)> clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/ip --set <IP Address (Common)> clpcfadm.py mod -t resource/ocdns@ocdns1/server@<Server name>/parameters/region --set <Region (Individual)> clpcfadm.py mod -t resource/ocdns@ocdns1/server@<Server name>/parameters/zoneid --set <Zone OCID (Individual)> clpcfadm.py mod -t resource/ocdns@ocdns1/server@<Server name>/parameters/ip --set <IP Address (Individual)>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.15.2. Setting Oracle Cloud DNS resource parameters¶
7.15.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.15.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep ocdns ocdns1
Set a parent resource
clpcfadm.py add rscdep ocdns ocdns1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep ocdns ocdns1 ""
Delete a parent resource
clpcfadm.py mod -t resource/ocdns@ocdns1/depend@<Parent resource name> --delete
7.15.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ocdns@ocdns1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/ocdns@ocdns1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ocdns@ocdns1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/ocdns@ocdns1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ocdns@ocdns1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/ocdns@ocdns1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ocdns@ocdns1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/ocdns@ocdns1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/ocdns@ocdns1/deact/preaction/account --set <Exec User>
-
7.15.2.4. Details¶
-
Common Region (Within 48 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/region --set <Region>
Domain (FQDN) (Within 254 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/domain --set <Domain (FQDN)>
Zone OCID (Within 255 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/zoneid --set <Zone OCID>
IP Address
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/ip --set <IP Address>
TTL (sec)
Default, 300 (minimum, 1; maximum, 604800)
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/ttl --set <Value>
Delete a resource record set at deactivation
Delete a resource record set at deactivation
Value
Delete
1
Do not delete (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/delete --set <Value>
Use Proxy
Use Proxy
Value
Use
1
Do not use (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/proxy/use --set <Value>
How far you manage a resource record in a multi-region environment
How far you manage a resource record in a multi-region environment
Value
Only the region to which the active server belongs
0
All regions to which the cluster servers belong (default)
1
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/operationscope --set <Value>
-
Tuning -
OCI CLI Timeout (sec)
Default, 100 (minimum, 1; maximum, 999)
clpcfadm.py mod -t resource/ocdns@ocdns1/parameters/ociclitimeout --set <Value>
-
-
Set Up Individually Set the following for each server.
Region (Within 48 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/server@<Server name>/parameters/region --set <Region> --nocheck
Zone OCID (Within 255 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/server@<Server name>/parameters/zoneid --set <Zone OCID> --nocheck
IP Address
clpcfadm.py mod -t resource/ocdns@ocdns1/server@<Server name>/parameters/ip --set <IP Address> --nocheck
7.15.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/ocdns@ocdns1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocdns@ocdns1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ocdns@ocdns1/preact/default --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/predeact/default --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/postact/default --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ocdns@ocdns1/preact/path --set <File> clpcfadm.py mod -t resource/ocdns@ocdns1/predeact/path --set <File> clpcfadm.py mod -t resource/ocdns@ocdns1/postact/path --set <File> clpcfadm.py mod -t resource/ocdns@ocdns1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/ocdns@ocdns1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/ocdns@ocdns1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/ocdns@ocdns1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/ocdns@ocdns1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ocdns@ocdns1/preact/timeout --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/postact/timeout --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/ocdns@ocdns1/preact/account --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/predeact/account --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/postact/account --set <Value> clpcfadm.py mod -t resource/ocdns@ocdns1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.15.3. Deleting an Oracle Cloud DNS resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> ocdns ocdns1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.16. Oracle Cloud Virtual IP resource¶
Note
7.16.1. Adding an Oracle Cloud Virtual IP resource¶
Be sure to set the following items. For details, see "Setting Oracle Cloud Virtual IP resource parameters".
Item (mandatory)
Group resource name
Port Number
clpcfadm.py add rsc <Name of a group to which the resource belongs> ocvip ocvip1 clpcfadm.py mod -t resource/ocvip@ocvip1/parameters/probeport --set <Port Number>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.16.2. Setting Oracle Cloud Virtual IP resource parameters¶
7.16.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/ocvip@ocvip1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.16.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep ocvip ocvip1
Set a parent resource
clpcfadm.py add rscdep ocvip ocvip1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep ocvip ocvip1 ""
Delete a parent resource
clpcfadm.py mod -t resource/ocvip@ocvip1/depend@<Parent resource name> --delete
7.16.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ocvip@ocvip1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/ocvip@ocvip1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ocvip@ocvip1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/ocvip@ocvip1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocvip@ocvip1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ocvip@ocvip1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ocvip@ocvip1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/ocvip@ocvip1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ocvip@ocvip1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/ocvip@ocvip1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/ocvip@ocvip1/deact/preaction/account --set <Exec User>
-
7.16.2.4. Details¶
Port Number
Default, None (minimum, 1; maximum, 65535)
clpcfadm.py mod -t resource/ocvip@ocvip1/parameters/probeport --set <Value>
-
Tuning Health Check Timeout (sec)
Default, 30 (minimum, 5; maximum, 999999999)
clpcfadm.py mod -t resource/ocvip@ocvip1/parameters/probetimeout --set <Value>
7.16.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/ocvip@ocvip1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocvip@ocvip1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocvip@ocvip1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocvip@ocvip1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/ocvip@ocvip1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/ocvip@ocvip1/preact/default --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/predeact/default --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/postact/default --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/ocvip@ocvip1/preact/path --set <File> clpcfadm.py mod -t resource/ocvip@ocvip1/predeact/path --set <File> clpcfadm.py mod -t resource/ocvip@ocvip1/postact/path --set <File> clpcfadm.py mod -t resource/ocvip@ocvip1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/ocvip@ocvip1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/ocvip@ocvip1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/ocvip@ocvip1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/ocvip@ocvip1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/ocvip@ocvip1/preact/timeout --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/postact/timeout --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/ocvip@ocvip1/preact/account --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/predeact/account --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/postact/account --set <Value> clpcfadm.py mod -t resource/ocvip@ocvip1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.16.3. Deleting an Oracle Cloud Virtual IP resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> ocvip ocvip1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.17. Registry synchronization resource¶
Note
7.17.1. Adding a registry synchronization resource¶
Be sure to set the following items. For details, see "Setting registry synchronization resource parameters".
Item (mandatory)
Group resource name
Registry Key
clpcfadm.py add rsc <Name of a group to which the resource belongs> regsync regsync1 clpcfadm.py mod -t resource/regsync@regsync1/parameters/list@<ID>/regkey --set <Registry Key> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.17.2. Setting registry synchronization resource parameters¶
7.17.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/regsync@regsync1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.17.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep regsync regsync1
Set a parent resource
clpcfadm.py add rscdep regsync regsync1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep regsync regsync1 ""
Delete a parent resource
clpcfadm.py mod -t resource/regsync@regsync1/depend@<Parent resource name> --delete
7.17.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/regsync@regsync1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/regsync@regsync1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/regsync@regsync1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/regsync@regsync1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/regsync@regsync1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/regsync@regsync1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/regsync@regsync1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/regsync@regsync1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/regsync@regsync1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/regsync@regsync1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/regsync@regsync1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/regsync@regsync1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/regsync@regsync1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/regsync@regsync1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/regsync@regsync1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/regsync@regsync1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/regsync@regsync1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/regsync@regsync1/deact/preaction/account --set <Exec User>
-
7.17.2.4. Details¶
Registry Key (Within 1023 bytes)
clpcfadm.py mod -t resource/regsync@regsync1/parameters/list@<ID>/regkey --set <Registry Key> --nocheck
Note
With only one registry key, specify 1 for ID.With more than one registry key, specify consecutive numbers (e.g., 1, 2, 3...).Note
If you register more than one registry key, you cannot specify a parent or child key of a registered key.
-
Tuning Delivery Interval (sec)
Default, 1 (minimum, 1; maximum, 99)
clpcfadm.py mod -t resource/regsync@regsync1/parameters/deliveryinterval --set <Value>
7.17.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/regsync@regsync1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/regsync@regsync1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/regsync@regsync1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/regsync@regsync1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/regsync@regsync1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/regsync@regsync1/preact/default --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/predeact/default --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/postact/default --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/regsync@regsync1/preact/path --set <File> clpcfadm.py mod -t resource/regsync@regsync1/predeact/path --set <File> clpcfadm.py mod -t resource/regsync@regsync1/postact/path --set <File> clpcfadm.py mod -t resource/regsync@regsync1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/regsync@regsync1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/regsync@regsync1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/regsync@regsync1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/regsync@regsync1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/regsync@regsync1/preact/timeout --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/postact/timeout --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/regsync@regsync1/preact/account --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/predeact/account --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/postact/account --set <Value> clpcfadm.py mod -t resource/regsync@regsync1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.17.3. Deleting a registry synchronization resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> regsync regsync1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.18. Script resource¶
Note
7.18.1. Adding a script resource¶
Be sure to set the following items. For details, see "Setting script resource parameters".
Item (mandatory)
Group resource name
clpcfadm.py add rsc <Name of a group to which the resource belongs> script script1Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.18.2. Setting script resource parameters¶
7.18.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/script@script1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.18.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep script script1
Set a parent resource
clpcfadm.py add rscdep script script1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep script script1 ""
Delete a parent resource
clpcfadm.py mod -t resource/script@script1/depend@<Parent resource name> --delete
7.18.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/script@script1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/script@script1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/script@script1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/script@script1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/script@script1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/script@script1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/script@script1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/script@script1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/script@script1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/script@script1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/script@script1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/script@script1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/script@script1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/script@script1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/script@script1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/script@script1/deact/preaction/account --set <Exec User>
-
7.18.2.4. Details¶
Script
Note
If you edit the default script file, edit <Installation path>\scripts\<Name of the group where the file belongs>\<Script resource name>\start.bat or stop.bat.If you add a script file, store it in <Installation path>\scripts\<Name of the group where the file belongs>\<Script resource name>.
-
Tuning -
Start Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/script@script1/parameters/acttimeout --set <Value>
Normal Return Value
clpcfadm.py mod -t resource/script@script1/parameters/actnormalval --set <Value>
Execute on standby server
Execute on standby server
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/parameters/actpostrunothers --set <Value>
Timeout (sec)
Default, 10 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/script@script1/parameters/acttimeoutothers --set <Value>
Note
Set as above with "Execute on standby server" set to "Execute".
Perform recovery processing
Perform recovery processing
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/parameters/recoveruse --set <Value>
-
Stop Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/script@script1/parameters/deacttimeout --set <Value>
Normal Return Value
clpcfadm.py mod -t resource/script@script1/parameters/deactnormalval --set <Value>
Execute on standby server
Execute on standby server
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/parameters/deactprerunothers --set <Value>
Timeout (sec)
Default, 10 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/script@script1/parameters/deacttimeoutothers --set <Value>
Note
Set as above with "Execute on standby server" set to "Execute".
Target VCOM Resource Name
clpcfadm.py mod -t resource/script@script1/parameters/target --set <Target VCOM Resource Name>
Allow to Interact with Desktop
Allow to Interact with Desktop
Value
Allow
1
Do not allow (default)
0
clpcfadm.py mod -t resource/script@script1/parameters/actinteractive --set <Value> clpcfadm.py mod -t resource/script@script1/parameters/deactinteractive --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/script@script1/parameters/account --set <Exec User>
-
7.18.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/script@script1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/script@script1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/script@script1/preact/default --set <Value> clpcfadm.py mod -t resource/script@script1/predeact/default --set <Value> clpcfadm.py mod -t resource/script@script1/postact/default --set <Value> clpcfadm.py mod -t resource/script@script1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/script@script1/preact/path --set <File> clpcfadm.py mod -t resource/script@script1/predeact/path --set <File> clpcfadm.py mod -t resource/script@script1/postact/path --set <File> clpcfadm.py mod -t resource/script@script1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/script@script1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/script@script1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/script@script1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/script@script1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/script@script1/preact/timeout --set <Value> clpcfadm.py mod -t resource/script@script1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/script@script1/postact/timeout --set <Value> clpcfadm.py mod -t resource/script@script1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/script@script1/preact/account --set <Value> clpcfadm.py mod -t resource/script@script1/predeact/account --set <Value> clpcfadm.py mod -t resource/script@script1/postact/account --set <Value> clpcfadm.py mod -t resource/script@script1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.18.3. Deleting a script resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> script script1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.19. Disk resource¶
Note
7.19.1. Adding a disk resource¶
Be sure to set the following items. For details, see "Setting disk resource parameters".
Item (mandatory)
Group resource name
Drive Letter
GUID
clpcfadm.py add rsc <Name of a group to which the resource belongs> sd sd1 clpcfadm.py mod -t resource/sd@sd1/parameters/volumemountpoint --set <Drive Letter> clpcfadm.py mod -t resource/sd@sd1/server@<Server name>/parameters/volumeguid --set <GUID> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.19.2. Setting disk resource parameters¶
7.19.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/sd@sd1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.19.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep sd sd1
Set a parent resource
clpcfadm.py add rscdep sd sd1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep sd sd1 ""
Delete a parent resource
clpcfadm.py mod -t resource/sd@sd1/depend@<Parent resource name> --delete
7.19.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/sd@sd1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/sd@sd1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/sd@sd1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/sd@sd1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/sd@sd1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/sd@sd1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/sd@sd1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/sd@sd1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/sd@sd1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/sd@sd1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/sd@sd1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/sd@sd1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/sd@sd1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/sd@sd1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/sd@sd1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/sd@sd1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/sd@sd1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/sd@sd1/deact/preaction/account --set <Exec User>
-
7.19.2.4. Details¶
Drive Letter
clpcfadm.py mod -t resource/sd@sd1/parameters/volumemountpoint --set <Drive Letter>
GUID
clpcfadm.py mod -t resource/sd@sd1/server@/<Server name>/parameters/volumeguid --set <GUID> --nocheck
Note
The GUID can be retrieved by using the clpdiskctrl command.For details, see "clpdiskctrl command".
7.19.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/sd@sd1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/sd@sd1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/sd@sd1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/sd@sd1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/sd@sd1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/sd@sd1/preact/default --set <Value> clpcfadm.py mod -t resource/sd@sd1/predeact/default --set <Value> clpcfadm.py mod -t resource/sd@sd1/postact/default --set <Value> clpcfadm.py mod -t resource/sd@sd1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/sd@sd1/preact/path --set <File> clpcfadm.py mod -t resource/sd@sd1/predeact/path --set <File> clpcfadm.py mod -t resource/sd@sd1/postact/path --set <File> clpcfadm.py mod -t resource/sd@sd1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/sd@sd1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/sd@sd1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/sd@sd1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/sd@sd1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/sd@sd1/preact/timeout --set <Value> clpcfadm.py mod -t resource/sd@sd1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/sd@sd1/postact/timeout --set <Value> clpcfadm.py mod -t resource/sd@sd1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/sd@sd1/preact/account --set <Value> clpcfadm.py mod -t resource/sd@sd1/predeact/account --set <Value> clpcfadm.py mod -t resource/sd@sd1/postact/account --set <Value> clpcfadm.py mod -t resource/sd@sd1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.19.3. Deleting a disk resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> sd sd1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.20. Service resource¶
Note
7.20.1. Adding a service resource¶
Be sure to set the following items. For details, see "Setting service resource parameters".
Item (mandatory)
Group resource name
Service Name
clpcfadm.py add rsc <Name of a group to which the resource belongs> service service1 clpcfadm.py mod -t resource/service@service1/parameters/name --set <Service Name>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.20.2. Setting service resource parameters¶
7.20.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/service@service1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.20.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep service service1
Set a parent resource
clpcfadm.py add rscdep service service1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep service service1 ""
Delete a parent resource
clpcfadm.py mod -t resource/service@service1/depend@<Parent resource name> --delete
7.20.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/service@service1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/service@service1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/service@service1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/service@service1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/service@service1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/service@service1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/service@service1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/service@service1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/service@service1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/service@service1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/service@service1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/service@service1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/service@service1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/service@service1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/service@service1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/service@service1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/service@service1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/service@service1/deact/preaction/account --set <Exec User>
-
7.20.2.4. Details¶
Service Name (Within 1023 bytes)
clpcfadm.py mod -t resource/service@service1/parameters/name --set <Service Name>
-
Tuning -
Start Synchronization type
Synchronization type
Value
Synchronous (default)
1
Asynchronous
0
clpcfadm.py mod -t resource/service@service1/parameters/actsync --set <Value>
Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/service@service1/parameters/acttimeout --set <Value>
Note
Set as above with "Synchronization type" set to "Synchronous".
-
Stop Synchronization type
Synchronization type
Value
Synchronous (default)
1
Asynchronous
0
clpcfadm.py mod -t resource/service@service1/parameters/deactsync --set <Value>
Timeout (sec)
Default, 1800 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/service@service1/parameters/deacttimeout --set <Value>
Note
Set as above with "Synchronization type" set to "Synchronous".
Target VCOM Resource Name
clpcfadm.py mod -t resource/service@service1/parameters/target --set <Target VCOM Resource Name>
-
-
Service Start Parameters (Within 1023 bytes)
clpcfadm.py mod -t resource/service@service1/parameters/option --set <Start Parameters>
Do not generate an error when the service is already started
Do not generate an error when the service is already started
Value
Generate an error (default)
0
Do not generate an error
1
clpcfadm.py mod -t resource/service@service1/parameters/started --set <Value>
Wait time after service started (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t resource/service@service1/parameters/actwaittime --set <Value>
Wait time after service stopped (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t resource/service@service1/parameters/deactwaittime --set <Value>
7.20.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/service@service1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/service@service1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/service@service1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/service@service1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/service@service1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/service@service1/preact/default --set <Value> clpcfadm.py mod -t resource/service@service1/predeact/default --set <Value> clpcfadm.py mod -t resource/service@service1/postact/default --set <Value> clpcfadm.py mod -t resource/service@service1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/service@service1/preact/path --set <File> clpcfadm.py mod -t resource/service@service1/predeact/path --set <File> clpcfadm.py mod -t resource/service@service1/postact/path --set <File> clpcfadm.py mod -t resource/service@service1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/service@service1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/service@service1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/service@service1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/service@service1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/service@service1/preact/timeout --set <Value> clpcfadm.py mod -t resource/service@service1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/service@service1/postact/timeout --set <Value> clpcfadm.py mod -t resource/service@service1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/service@service1/preact/account --set <Value> clpcfadm.py mod -t resource/service@service1/predeact/account --set <Value> clpcfadm.py mod -t resource/service@service1/postact/account --set <Value> clpcfadm.py mod -t resource/service@service1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.20.3. Deleting a service resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> service service1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.21. Virtual computer name resource¶
Note
7.21.1. Adding a virtual computer name resource¶
Be sure to set the following items. For details, see "Setting virtual computer name resource parameters".
Item (mandatory)
Group resource name
Virtual Computer Name
clpcfadm.py add rsc <Name of a group to which the resource belongs> vcom vcom1 clpcfadm.py mod -t resource/vcom@vcom1/parameters/vcomname --set <Virtual Computer Name>Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.21.2. Setting virtual computer name resource parameters¶
7.21.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/vcom@vcom1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.21.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep vcom vcom1
Set a parent resource
clpcfadm.py add rscdep vcom vcom1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep vcom vcom1 ""
Delete a parent resource
clpcfadm.py mod -t resource/vcom@vcom1/depend@<Parent resource name> --delete
7.21.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/vcom@vcom1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/vcom@vcom1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/vcom@vcom1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/vcom@vcom1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vcom@vcom1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/vcom@vcom1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/vcom@vcom1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/vcom@vcom1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/vcom@vcom1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/vcom@vcom1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection Retry Count at Deactivation Failure
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/vcom@vcom1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/vcom@vcom1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vcom@vcom1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/vcom@vcom1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/vcom@vcom1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/vcom@vcom1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/vcom@vcom1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/vcom@vcom1/deact/preaction/account --set <Exec User>
-
7.21.2.4. Details¶
Important
Virtual Computer Name (Within 15 bytes)
clpcfadm.py mod -t resource/vcom@vcom1/parameters/vcomname --set <Virtual Computer Name>
Target FIP Resource Name
clpcfadm.py mod -t resource/vcom@vcom1/parameters/target --set <Target FIP Resource Name>
-
Tuning Register with DNS dynamically
Register with DNS dynamically
Value
Dynamically register
1
Do not dynamically register (default)
0
clpcfadm.py mod -t resource/vcom@vcom1/parameters/dnsregister --set <Value>
Note
To set the following items, set "Register with DNS dynamically" to "Dynamically register" in advance.
IP address to be associated
IP address to be associated
Value
FIP (default)
0
Any Address
2
clpcfadm.py mod -t resource/vcom@vcom1/parameters/dnstype --set <Value>
Important
If "Target FIP Resource Name" has not been set, specify "Any Address".
IP Address
clpcfadm.py mod -t resource/vcom@vcom1/server@<Server name>/parameters/dnsip --set <IP Address> --nocheck
Note
Set as above with "IP address to be associated" set to "Any Address".
Note
If you delete a server, set as follows:
clpcfadm.py mod -t resource/vcom@vcom1/server@<Server name> --delete
7.21.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/vcom@vcom1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vcom@vcom1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vcom@vcom1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vcom@vcom1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vcom@vcom1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/vcom@vcom1/preact/default --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/predeact/default --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/postact/default --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/vcom@vcom1/preact/path --set <File> clpcfadm.py mod -t resource/vcom@vcom1/predeact/path --set <File> clpcfadm.py mod -t resource/vcom@vcom1/postact/path --set <File> clpcfadm.py mod -t resource/vcom@vcom1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/vcom@vcom1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/vcom@vcom1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/vcom@vcom1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/vcom@vcom1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/vcom@vcom1/preact/timeout --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/postact/timeout --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/vcom@vcom1/preact/account --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/predeact/account --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/postact/account --set <Value> clpcfadm.py mod -t resource/vcom@vcom1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.21.3. Deleting a virtual computer name resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> vcom vcom1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
7.22. Virtual IP resource¶
Note
7.22.1. Adding a Virtual IP resource¶
Be sure to set the following items. For details, see "Setting Virtual IP resource parameters".
Item (mandatory)
Group resource name
IP Address
Net Mask
Destination IP Address
Source IP Address
Routing Protocol
clpcfadm.py add rsc <Name of a group to which the resource belongs> vip vip1 clpcfadm.py mod -t resource/vip@vip1/parameters/ip --set <IP Address (Common)> clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/ip --set <IP Address (Individual)> --nocheck clpcfadm.py mod -t resource/vip@vip1/parameters/mask --set <Net Mask (Common)> clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/mask --set <Net Mask (Individual)> --nocheck clpcfadm.py mod -t resource/vip@vip1/parameters/multicast/dstaddr --set <Destination IP Address (Common)> clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/multicast/dstaddr --set <Destination IP Address (Individual)> --nocheck clpcfadm.py mod -t resource/vip@vip1/parameters/multicast/srcaddr --set <Source IP Address (Common)> clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/multicast/srcaddr --set <Source IP Address (Individual)> --nocheck clpcfadm.py mod -t resource/vip@vip1/parameters/protocol --set <Routing Protocol (Common)> clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/protocol --set <Routing Protocol (Individual)> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
7.22.2. Setting Virtual IP resource parameters¶
7.22.2.1. Basic information¶
Group resource name (Within 31 bytes)
This is set when the resource is added. To change the group resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t resource/vip@vip1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
7.22.2.2. Dependency¶
Follow the default dependency (default)
clpcfadm.py del rscdep vip vip1
Set a parent resource
clpcfadm.py add rscdep vip vip1 <Parent resource name>
No parent resource
clpcfadm.py add rscdep vip vip1 ""
Delete a parent resource
clpcfadm.py mod -t resource/vip@vip1/depend@<Parent resource name> --delete
7.22.2.3. Recovery Operation¶
-
Recovery Operation at Activity Failure Detection Retry Count
Default, 5 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/vip@vip1/act/retry --set <Value>
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t resource/vip@vip1/act/mode --set <Value>
Failover Threshold
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/vip@vip1/act/fo2 --set <Value>
Final Action
Final Action
Value
No operation (activate next resource)
0
No operation (not activate next resource) (default)
1
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/vip@vip1/act/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vip@vip1/act/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/vip@vip1/act/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/vip@vip1/act/preaction/path --set <File>
Note
If you specify "Script created with this product", specify preactaction.bat.
clpcfadm.py mod -t resource/vip@vip1/act/preaction/path --set preactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/vip@vip1/act/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/vip@vip1/act/preaction/account --set <Exec User>
-
-
Recovery Operation at Deactivity Failure Detection
Retry Count at Deactivation Failure
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t resource/vip@vip1/deact/retry --set <Value>
Final Action
Final Action
Value
No operation (deactivate next resource)
0
No operation (not deactivate next resource)
1
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t resource/vip@vip1/deact/action --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vip@vip1/deact/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/vip@vip1/deact/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/vip@vip1/deact/preaction/path --set <File>
Note
If you specify "Script created with this product", specify predeactaction.bat.
clpcfadm.py mod -t resource/vip@vip1/deact/preaction/path --set predeactaction.bat
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/vip@vip1/deact/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t resource/vip@vip1/act/preaction/account --set <Exec User>
-
7.22.2.4. Details¶
-
Common IP Address
clpcfadm.py mod -t resource/vip@vip1/parameters/ip --set <IP Address>
Net Mask
clpcfadm.py mod -t resource/vip@vip1/parameters/mask --set <Net Mask>
Destination IP Address
clpcfadm.py mod -t resource/vip@vip1/parameters/multicast/dstaddr --set <Destination IP Address>
Source IP Address
clpcfadm.py mod -t resource/vip@vip1/parameters/multicast/srcaddr --set <Source IP Address>
Send Interval (sec)
Default, 30 (minimum, 1; maximum, 30)
clpcfadm.py mod -t resource/vip@vip1/parameters/multicast/interval --set <Value>
Routing Protocol
Value
RIPngver1
RIPngver2
RIPngver3
RIPver1 (default)
RIPver2
clpcfadm.py mod -t resource/vip@vip1/parameters/protocol --set <Value>
Note
If you use two or more routing protocols, put commas (,) to separate them.
clpcfadm.py mod -t resource/vip@vip1/parameters/protocol --set "RIPngver3,RIPver2"
-
Tuning -
Parameter Run Ping
Run Ping
Value
Execute Ping (default)
1
Do not execute Ping
0
clpcfadm.py mod -t resource/vip@vip1/parameters/pingexec --set <Value>
-
ping Interval (sec)
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t resource/vip@vip1/parameters/pinginterval --set <Value>
Timeout (msec)
Default, 1000 (minimum, 1; maximum, 999999)
clpcfadm.py mod -t resource/vip@vip1/parameters/pingtimeout --set <Value>
Retry Count
Default, 5 (minimum, 0; maximum, 999)
clpcfadm.py mod -t resource/vip@vip1/parameters/pingretry --set <Value>
Judge NIC Link Down as Failure
Judge NIC Link Down as Failure
Value
Yes
1
No (default)
0
clpcfadm.py mod -t resource/vip@vip1/parameters/monmii --set <Value>
-
RIP Metric
Default, 3 (minimum, 1; maximum, 15)
clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/rip/metric --set <Value>
-
Port Port
Default, 520 (minimum, 1; maximum, 65535)
-
Add clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/rip/port --set <Value>
Note
If you set two or more ports, put commas (,) to separate them.
clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/rip/port --set "12345,520"
-
Delete (initializing the value to the default value) clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/rip/port --set 520
-
-
RIPng Metric
Default, 1 (minimum, 1; maximum, 15)
clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/ripng/metric --set <Value>
Port
Default, 521 (minimum, 1; maximum, 65535)
-
Add clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/ripng/port --set <Value>
Note
If you set two or more ports, put commas (,) to separate them.
clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/ripng/port --set "12345,521"
-
Delete (initializing the value to the default value) clpcfadm.py mod -t resource/vip@vip1/parameters/protocols/ripng/port --set 521
-
-
-
Set Up Individually Set the following for each server.
IP Address
clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/ip --set <IP Address> --nocheck
Net Mask (Within 15 bytes)
clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/mask --set <Net Mask> --nocheck
Destination IP Address
clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/multicast/dstaddr --set <Destination IP Address> --nocheck
Source IP Address
clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/multicast/srcaddr --set <Source IP Address> --nocheck
Send Interval (sec)
clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/multicast/interval --set <Send Interval> --nocheck
Routing Protocol
clpcfadm.py mod -t resource/vip@vip1/server@<Server name>/parameters/protocol --set <Routing Protocol> --nocheck
7.22.2.5. Extension¶
Resource Startup Attribute
Resource Startup Attribute
Value
Automatic startup (default)
1
Manual startup
0
clpcfadm.py mod -t resource/vip@vip1/start --set <Value>
-
Execute Script before or after Activation or Deactivation Note
If "Execute" is set for a script, specify the file. (See "Script Settings" -> "File".)
Execute Script before Activation
Execute Script before Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vip@vip1/preact/use --set <Value>
Execute Script after Activation
Execute Script after Activation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vip@vip1/predeact/use --set <Value>
Execute Script before Deactivation
Execute Script before Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vip@vip1/postact/use --set <Value>
Execute Script after Deactivation
Execute Script after Deactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t resource/vip@vip1/postdeact/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t resource/vip@vip1/preact/default --set <Value> clpcfadm.py mod -t resource/vip@vip1/predeact/default --set <Value> clpcfadm.py mod -t resource/vip@vip1/postact/default --set <Value> clpcfadm.py mod -t resource/vip@vip1/postdeact/default --set <Value>
Note
Set each of the <Value> fields to the same value.
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t resource/vip@vip1/preact/path --set <File> clpcfadm.py mod -t resource/vip@vip1/predeact/path --set <File> clpcfadm.py mod -t resource/vip@vip1/postact/path --set <File> clpcfadm.py mod -t resource/vip@vip1/postdeact/path --set <File>
Note
Set all <File> fields to the same value.
Note
If you specify "Script created with this product", specify rscextent.bat.
clpcfadm.py mod -t resource/vip@vip1/preact/path --set rscextent.bat clpcfadm.py mod -t resource/vip@vip1/predeact/path --set rscextent.bat clpcfadm.py mod -t resource/vip@vip1/postact/path --set rscextent.bat clpcfadm.py mod -t resource/vip@vip1/postdeact/path --set rscextent.bat
Timeout (sec)
Default, 30 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t resource/vip@vip1/preact/timeout --set <Value> clpcfadm.py mod -t resource/vip@vip1/predeact/timeout --set <Value> clpcfadm.py mod -t resource/vip@vip1/postact/timeout --set <Value> clpcfadm.py mod -t resource/vip@vip1/postdeact/timeout --set <Value>
Note
Set each of the <Value> fields to the same value.
Exec User
clpcfadm.py mod -t resource/vip@vip1/preact/account --set <Value> clpcfadm.py mod -t resource/vip@vip1/predeact/account --set <Value> clpcfadm.py mod -t resource/vip@vip1/postact/account --set <Value> clpcfadm.py mod -t resource/vip@vip1/postdeact/account --set <Value>
Note
Set each of the <Value> fields to the same value.
7.22.3. Deleting a Virtual IP resource¶
Delete a resource by specifying the group resource type and group resource name.
clpcfadm.py del rsc <Name of the group to which the resource belongs> vip vip1Important
Resources associated with the group resource that you delete, such as monitor resources, are not deleted together.
8. Configuring monitor resources¶
8.1. Application monitor resource¶
Note
8.1.1. Adding an application monitor resource¶
Be sure to set the following items. For details, see "Setting application monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon appliw appliw1 clpcfadm.py mod -t monitor/appliw@appliw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/appliw@appliw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/appliw@appliw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.1.2. Setting application monitor resource parameters¶
8.1.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/appliw@appliw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.1.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/appliw@appliw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/appliw@appliw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/appliw@appliw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 3 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/appliw@appliw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/appliw@appliw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an application resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/appliw@appliw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/appliw@appliw1/perf/metrics/use --set <Value>
8.1.2.3. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/appliw@appliw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/appliw@appliw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/appliw@appliw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/account --set <Exec User>
Exec User
clpcfadm.py mod -t monitor/appliw@appliw1/emergency/preaction/account --set <Exec User>
8.1.3. Deleting an application monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon appliw appliw1
8.2. AWS AZ monitor resource¶
Note
8.2.1. Adding an AWS AZ monitor resource¶
Be sure to set the following items. For details, see "Setting AWS AZ monitor resource parameters".
Item (mandatory)
Monitor resource name
Availability Zone
Recovery target
Recovery target type
clpcfadm.py add mon awsazw awsazw1 clpcfadm.py mod -t monitor/awsazw@awsazw1/parameters/availabilityzone --set <Availability Zone> clpcfadm.py mod -t monitor/awsazw@awsazw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awsazw@awsazw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.2.2. Setting AWS AZ monitor resource parameters¶
8.2.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/awsazw@awsazw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.2.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/awsazw@awsazw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/awsazw@awsazw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/awsazw@awsazw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/awsazw@awsazw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/awsazw@awsazw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/awsazw@awsazw1/perf/metrics/use --set <Value>
8.2.2.3. Monitor (special)¶
-
Common Availability Zone (Within 45 bytes)
clpcfadm.py mod -t monitor/awsazw@awsazw1/parameters/availabilityzone --set <Availability Zone>
Action when AWS CLI command failed to receive response
Action when AWS CLI command failed to receive response
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/awsazw@awsazw1/parameters/mode --set <Value>
-
Set Up Individually Set the following for each server.
Availability Zone (Within 45 bytes)
clpcfadm.py mod -t monitor/awsazw@awsazw1/server@<Server name>/parameters/availabilityzone --set <Value> --nocheck
Note
To return to the common settings, set the following for each server.
clpcfadm.py mod -t monitor/awsazw@awsazw1/server@<Server name> --delete
8.2.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/awsazw@awsazw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awsazw@awsazw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/awsazw@awsazw1/emergency/preaction/account --set <Exec User>
8.2.3. Deleting an AWS AZ monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon awsazw awsazw1
8.3. AWS DNS monitor resource¶
Note
8.3.1. Adding an AWS DNS monitor resource¶
Be sure to set the following items. For details, see "Setting AWS DNS monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon awsdnsw awsdnsw1 clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.3.2. Setting AWS DNS monitor resource parameters¶
8.3.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.3.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 300 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an AWS DNS resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/perf/metrics/use --set <Value>
8.3.2.3. Monitor (special)¶
Action when AWS CLI command failed to receive response
Action when AWS CLI command failed to receive response
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/parameters/mode --set <Value>
Check Name Resolution
Check Name Resolution
Value
Check Name Resolution (default)
1
Do not check name resolution
0
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/parameters/dnscheck --set <Value>
8.3.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 9
16
Stop group 10
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/awsdnsw@awsdnsw1/emergency/preaction/account --set <Exec User>
8.3.3. Deleting an AWS DNS monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon awsdnsw awsdnsw1
8.4. AWS Elastic IP monitor resource¶
Note
8.4.1. Adding an AWS Elastic IP monitor resource¶
Be sure to set the following items. For details, see "Setting AWS Elastic IP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon awseipw awseipw1 clpcfadm.py mod -t monitor/awseipw@awseipw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/awseipw@awseipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awseipw@awseipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.4.2. Setting AWS Elastic IP monitor resource parameters¶
8.4.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/awseipw@awseipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.4.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/awseipw@awseipw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/awseipw@awseipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/awseipw@awseipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/awseipw@awseipw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/awseipw@awseipw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an AWS Elastic IP resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/awseipw@awseipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/awseipw@awseipw1/perf/metrics/use --set <Value>
8.4.2.3. Monitor (special)¶
Action when AWS CLI command failed to receive response
Action when AWS CLI command failed to receive response
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/awseipw@awseipw1/parameters/mode --set <Value>
8.4.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/awseipw@awseipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awseipw@awseipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/awseipw@awseipw/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 11
16
Stop group 12
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/awseipw@awseipw1/emergency/preaction/account --set <Exec User>
8.4.3. Deleting an AWS Elastic IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon awseipw awseipw1
8.5. AWS Secondary IP monitor resource¶
Note
8.5.1. Adding an AWS secondary IP monitor resource¶
Be sure to set the following items. For details, see "Setting AWS secondary IP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon awssipw awssipw1 clpcfadm.py mod -t monitor/awssipw@awssipw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/awssipw@awssipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awssipw@awssipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.5.2. Setting AWS secondary IP monitor resource parameters¶
8.5.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/awssipw@awssipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.5.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/awssipw@awssipw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/awssipw@awssipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/awssipw@awssipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/awssipw@awssipw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/awssipw@awssipw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an AWS secondary IP resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/awssipw@awssipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/awssipw@awssipw1/perf/metrics/use --set <Value>
8.5.2.3. Monitor (special)¶
Action when AWS CLI command failed to receive response
Action when AWS CLI command failed to receive response
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/awssipw@awssipw1/parameters/mode --set <Value>
8.5.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/awssipw@awssipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awssipw@awssipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 13
16
Stop group 14
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/awssipw@awssipw1/emergency/preaction/account --set <Exec User>
8.5.3. Deleting an AWS secondary IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon awssipw awssipw1
8.6. AWS Virtual IP monitor resource¶
Note
8.6.1. Adding an AWS Virtual IP monitor resource¶
Be sure to set the following items. For details, see "Setting AWS Virtual IP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon awsvipw awsvipw1 clpcfadm.py mod -t monitor/awsvipw@awsvipw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/awsvipw@awsvipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awsvipw@awsvipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.6.2. Setting AWS Virtual IP monitor resource parameters¶
8.6.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.6.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an AWS Virtual IP resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/perf/metrics/use --set <Value>
8.6.2.3. Monitor (special)¶
Action when AWS CLI command failed to receive response
Action when AWS CLI command failed to receive response
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/parameters/mode --set <Value>
8.6.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/awsvipw@awsvipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 15
16
Stop group 16
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/awsvipw@awsvipw1/emergency/preaction/account --set <Exec User>
8.6.3. Deleting an AWS Virtual IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon awsvipw awsvipw1
8.7. Azure DNS monitor resource¶
Note
8.7.1. Adding an Azure DNS monitor resource¶
Be sure to set the following items. For details, see "Setting Azure DNS monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon azurednsw azurednsw1 clpcfadm.py mod -t monitor/azurednsw@azurednsw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/azurednsw@azurednsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/azurednsw@azurednsw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.7.2. Setting Azure DNS monitor resource parameters¶
8.7.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.7.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 60 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an Azure DNS resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/perf/metrics/use --set <Value>
8.7.2.3. Monitor (special)¶
Check Name Resolution
Check Name Resolution
Value
Check Name Resolution (default)
1
Do not check name resolution
0
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/parameters/dnscheck --set <Value>
8.7.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/azurednsw@azurednsw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 17
16
Stop group 18
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/azurednsw@azurednsw1/emergency/preaction/account --set <Exec User>
8.7.3. Deleting an Azure DNS monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon azurednsw azurednsw1
8.8. Azure load balance monitor resource¶
Note
8.8.1. Adding an Azure load balance monitor resource¶
Be sure to set the following items. For details, see "Setting Azure load balance monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource
Recovery target
Recovery target type
clpcfadm.py add mon azurelbw azurelbw1 clpcfadm.py mod -t monitor/azurelbw@azurelbw1/parameters/object --set <Target Resource> clpcfadm.py mod -t monitor/azurelbw@azurelbw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/azurelbw@azurelbw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.8.2. Setting Azure load balance monitor resource parameters¶
8.8.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.8.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/perf/metrics/use --set <Value>
8.8.2.3. Monitor (special)¶
Target Resource
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/parameters/object --set <Target Resource>
Note
You can specify only an Azure probe port resource.
8.8.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/azurelbw@azurelbw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 19
16
Stop group 20
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/azurelbw@azurelbw1/emergency/preaction/account --set <Exec User>
8.8.3. Deleting an Azure load balance monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon azurelbw azurelbw1
8.9. Azure probe port monitor resource¶
Note
8.9.1. Adding an Azure probe port monitor resource¶
Be sure to set the following items. For details, see "Setting Azure probe port monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon azureppw azureppw1 clpcfadm.py mod -t monitor/azureppw@azureppw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/azureppw@azureppw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/azureppw@azureppw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.9.2. Setting Azure probe port monitor resource parameters¶
8.9.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/azureppw@azureppw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.9.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/azureppw@azureppw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/azureppw@azureppw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/azureppw@azureppw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/azureppw@azureppw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/azureppw@azureppw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an Azure probe port resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/azureppw@azureppw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/azureppw@azureppw1/perf/metrics/use --set <Value>
8.9.2.3. Monitor (special)¶
Action when Probe port wait timeout
Action when Probe port wait timeout
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/azureppw@azureppw1/parameters/mode --set <Value>
8.9.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/azureppw@azureppw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/azureppw@azureppw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 21
16
Stop group 22
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/azureppw@azureppw1/emergency/preaction/account --set <Exec User>
8.9.3. Deleting an Azure probe port monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon azureppw azureppw1
8.10. CIFS monitor resource¶
Note
8.10.1. Adding a CIFS monitor resource¶
Be sure to set the following items. For details, see "Setting CIFS monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon cifsw cifsw1 clpcfadm.py mod -t monitor/cifsw@cifsw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/cifsw@cifsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/cifsw@cifsw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.10.2. Setting CIFS monitor resource parameters¶
8.10.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/cifsw@cifsw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.10.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/cifsw@cifsw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/cifsw@cifsw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/cifsw@cifsw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/cifsw@cifsw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/cifsw@cifsw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a CIFS resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/cifsw@cifsw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/cifsw@cifsw1/perf/metrics/use --set <Value>
8.10.2.3. Monitor (special)¶
Access check
Access check
Value
Do not perform (default)
0
Folder check
1
File check
2
clpcfadm.py mod -t monitor/cifsw@cifsw1/parameters/accesscheck --set <Value>
Path (Within 255 bytes)
clpcfadm.py mod -t monitor/cifsw@cifsw1/parameters/checkpath --set <Path>
Note
Set as above with "Access check" set to "Folder check" or "File check".
Check
Check
Value
Read and write
1
Read (default)
0
clpcfadm.py mod -t monitor/cifsw@cifsw1/parameters/checkmethod --set <Value>
Note
Set as above with "Access check" set to "File check".
8.10.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/cifsw@cifsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/cifsw@cifsw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/cifsw@cifsw1/emergency/preaction/account --set <Exec User>
8.10.3. Deleting a CIFS monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon cifsw cifsw1
8.11. DB2 monitor resource¶
Note
8.11.1. Adding a DB2 monitor resource¶
Be sure to set the following items. For details, see "Setting DB2 monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Database Name
Recovery target
Recovery target type
clpcfadm.py add mon db2w db2w1 clpcfadm.py mod -t monitor/db2w@db2w1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/db2w@db2w1/agentparam/dbname --set <Database Name> --nocheck clpcfadm.py mod -t monitor/db2w@db2w1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/db2w@db2w1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.11.2. Setting DB2 monitor resource parameters¶
8.11.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/db2w@db2w1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.11.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/db2w@db2w1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/db2w@db2w1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/db2w@db2w1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/db2w@db2w1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/db2w@db2w1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/db2w@db2w1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/db2w@db2w1/perf/metrics/use --set <Value>
8.11.2.3. Monitor (special)¶
Monitor Level
Monitor Level
Value
Level 1 (monitoring by select)
3
Level 2 (monitoring by update/select) (default)
0
clpcfadm.py mod -t monitor/db2w@db2w1/agentparam/docreatedrop --set <Value>
Database Name (Within 255 bytes)
clpcfadm.py mod -t monitor/db2w@db2w1/agentparam/dbname --set <Database Name> --nocheck
Instance Name (Within 255 bytes)
Default: DB2
clpcfadm.py mod -t monitor/db2w@db2w1/agentparam/instance --set <Instance Name>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/db2w@db2w1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/db2w@db2w1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Monitor Table Name (Within 255 bytes)
Default: db2watch
clpcfadm.py mod -t monitor/db2w@db2w1/agentparam/tablename --set <Monitor Table Name>
8.11.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/db2w@db2w1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/db2w@db2w1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/db2w@db2w1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/db2w@db2w1/emergency/preaction/account --set <Exec User>
8.11.3. Deleting a DB2 monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon db2w db2w1
8.12. Dynamic DNS monitor resource¶
Note
8.12.1. Adding a dynamic DNS monitor resource¶
Be sure to set the following items. For details, see "Setting dynamic DNS monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon ddnsw ddnsw1 clpcfadm.py mod -t monitor/ddnsw@ddnsw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/ddnsw@ddnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ddnsw@ddnsw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.12.2. Setting dynamic DNS monitor resource parameters¶
8.12.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.12.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a dynamic DNS resource for this monitor resource.
Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/perf/metrics/use --set <Value>
8.12.2.3. Monitor (special)¶
Check Name Resolution
Check Name Resolution
Value
Check Name Resolution (default)
1
Do not check name resolution
0
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/parameters/dnscheck --set <Value>
8.12.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ddnsw@ddnsw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/ddnsw@ddnsw1/emergency/preaction/account --set <Exec User>
8.12.3. Deleting a dynamic DNS monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon ddnsw ddnsw1
8.13. Disk RW monitor resource¶
Note
8.13.1. Adding a disk RW monitor resource¶
Be sure to set the following items. For details, see "Setting disk RW monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon diskw diskw1 clpcfadm.py mod -t monitor/diskw@diskw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/diskw@diskw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/diskw@diskw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.13.2. Setting disk RW monitor resource parameters¶
8.13.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/diskw@diskw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.13.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/diskw@diskw1/polling/interval --set <Value>
Timeout (sec)
Default, 300 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/diskw@diskw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 0 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/diskw@diskw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/diskw@diskw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always
0
Active (default)
1
clpcfadm.py mod -t monitor/diskw@diskw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/diskw@diskw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/diskw@diskw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/diskw@diskw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/diskw@diskw1/perf/metrics/use --set <Value>
8.13.2.3. Monitor (special)¶
File Name (Within 1023 bytes)
clpcfadm.py mod -t monitor/diskw@diskw1/parameters/file --set <File Name> --nocheck
I/O size (bytes)
Default, 2000000 (minimum, 1; maximum, 99999999)
clpcfadm.py mod -t monitor/diskw@diskw1/parameters/size --set <Value> --nocheck
Action on Stall
Action on Stall
Value
No operation
0
Reset the hardware
1
Generate an intentional stop error (default)
2
clpcfadm.py mod -t monitor/diskw@diskw1/parameters/stallaction --set <Value> --nocheck
Action When Diskfull Is Detected
Action When Diskfull Is Detected
Value
Recover
0
Recover (default)
1
clpcfadm.py mod -t monitor/diskw@diskw1/parameters/diskfullerr --set <Value> --nocheck
Use Write Through Method
Use Write Through Method
Value
Use
0
Do not use (default)
1
clpcfadm.py mod -t monitor/diskw@diskw1/parameters/writecache --set <Value> --nocheck
8.13.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/diskw@diskw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/diskw@diskw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/diskw@diskw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/diskw@diskw1/emergency/preaction/account --set <Exec User>
8.13.3. Deleting a disk RW monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon diskw diskw1
8.14. Floating IP monitor resource¶
Note
8.14.1. Adding a floating IP monitor resource¶
Be sure to set the following items. For details, see "Setting floating IP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon fipw fipw1 clpcfadm.py mod -t monitor/fipw@fipw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/fipw@fipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/fipw@fipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.14.2. Setting floating IP monitor resource parameters¶
8.14.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/fipw@fipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.14.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/fipw@fipw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/fipw@fipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/fipw@fipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/fipw@fipw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/fipw@fipw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a Virtual IP resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/fipw@fipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/fipw@fipw1/perf/metrics/use --set <Value>
8.14.2.3. Monitor (special)¶
Monitor NIC Link Up/Down
Monitor NIC Link Up/Down
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/fipw@fipw1/parameters/monmii --set <Value>
8.14.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/fipw@fipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/fipw@fipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/fipw@fipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/fipw@fipw1/emergency/preaction/account --set <Exec User>
8.14.3. Deleting a floating IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon fipw fipw1
8.15. FTP monitor resource¶
Note
8.15.1. Adding an FTP monitor resource¶
Be sure to set the following items. For details, see "Setting FTP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon ftpw ftpw1 clpcfadm.py mod -t monitor/ftpw@ftpw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/ftpw@ftpw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ftpw@ftpw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.15.2. Setting FTP monitor resource parameters¶
8.15.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/ftpw@ftpw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.15.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/ftpw@ftpw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/ftpw@ftpw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 3 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/ftpw@ftpw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/ftpw@ftpw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/ftpw@ftpw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/ftpw@ftpw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/ftpw@ftpw1/perf/metrics/use --set <Value>
8.15.2.3. Monitor (special)¶
IP Address
Default: 127.0.0.1
clpcfadm.py mod -t monitor/ftpw@ftpw1/agentparam/ipaddress --set <IP Address>
Port Number
Default, 21 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/ftpw@ftpw1/agentparam/port --set <Value>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/ftpw@ftpw1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/ftpw@ftpw1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Protocol
Protocol
Value
FTP (default)
0
FTPS
1
clpcfadm.py mod -t monitor/ftpw@ftpw1/agentparam/protocol --set <Value>
8.15.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/ftpw@ftpw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ftpw@ftpw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/ftpw@ftpw1/emergency/preaction/account --set <Exec User>
8.15.3. Deleting an FTP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon ftpw ftpw1
8.16. Google Cloud DNS monitor resource¶
Note
8.16.1. Adding a Google Cloud DNS monitor resource¶
Be sure to set the following items. For details, see "Setting Google Cloud DNS monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon gcdnsw gcdnsw1 clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.16.2. Setting Google Cloud DNS monitor resource parameters¶
8.16.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.16.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 3 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a Google Cloud DNS resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/perf/metrics/use --set <Value>
8.16.2.3. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 35
16
Stop group 36
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/gcdnsw@gcdnsw1/emergency/preaction/account --set <Exec User>
8.16.3. Deleting a Google Cloud DNS monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon gcdnsw gcdnsw1
8.17. Google Cloud load balance monitor resource¶
Note
8.17.1. Adding a Google Cloud load balance monitor resource¶
Be sure to set the following items. For details, see "Setting Google Cloud load balance monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource
Recovery target
Recovery target type
clpcfadm.py add mon gclbw gclbw1 clpcfadm.py mod -t monitor/gclbw@gclbw1/parameters/object --set <Target Resource> clpcfadm.py mod -t monitor/gclbw@gclbw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/gclbw@gclbw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.17.2. Setting Google Cloud load balance monitor resource parameters¶
8.17.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/gclbw@gclbw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.17.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/gclbw@gclbw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/gclbw@gclbw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/gclbw@gclbw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/gclbw@gclbw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/gclbw@gclbw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/gclbw@gclbw1/perf/metrics/use --set <Value>
8.17.2.3. Monitor (special)¶
Target Resource
clpcfadm.py mod -t monitor/gclbw@gclbw1/parameters/object --set <Target Resource>
Note
You can specify only a Google Cloud Virtual IP resource.
8.17.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/gclbw@gclbw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/gclbw@gclbw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/gclbw@gclbw1/emergency/preaction/account --set <Exec User>
8.17.3. Deleting a Google Cloud load balance monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon gclbw gclbw1
8.18. Google Cloud Virtual IP monitor resource¶
Note
8.18.1. Adding a Google Cloud Virtual IP monitor resource¶
Be sure to set the following items. For details, see "Setting Google Cloud Virtual IP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon gcvipw gcvipw1 clpcfadm.py mod -t monitor/gcvipw@gcvipw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/gcvipw@gcvipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/gcvipw@gcvipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.18.2. Setting Google Cloud Virtual IP monitor resource parameters¶
8.18.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.18.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a Google Cloud Virtual IP resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/perf/metrics/use --set <Value>
8.18.2.3. Monitor (special)¶
Health Check Timeout Operation
Health Check Timeout Operation
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/parameters/mode --set <Value>
8.18.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/gcvipw@gcvipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 39
16
Stop group 40
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/gcvipw@gcvipw1/emergency/preaction/account --set <Exec User>
8.18.3. Deleting a Google Cloud Virtual IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon gcvipw gcvipw1
8.19. Custom monitor resource¶
Note
8.19.1. Adding a custom monitor resource¶
Be sure to set the following items. For details, see "Setting custom monitor resource parameters".
Item (mandatory)
Monitor resource name
Recovery target
Recovery target type
clpcfadm.py add mon genw genw1 clpcfadm.py mod -t monitor/genw@genw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/genw@genw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.19.2. Setting custom monitor resource parameters¶
8.19.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/genw@genw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.19.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/genw@genw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/genw@genw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/genw@genw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/genw@genw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/genw@genw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 3 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/genw@genw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always (default)
0
Active
1
clpcfadm.py mod -t monitor/genw@genw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/genw@genw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/genw@genw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/genw@genw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/genw@genw1/perf/metrics/use --set <Value>
8.19.2.3. Monitor (special)¶
Script file type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/genw@genw1/parameters/default --set <Value>
Note
If you change the value of this parameter, also change that of "Script file".
Script file (Within 1023 bytes)
clpcfadm.py mod -t monitor/genw@genw1/parameters/path --set <Script file> --nocheck
Note
If you specify "Script created with this product", specify genw.bat.
clpcfadm.py mod -t monitor/genw@genw1/parameters/path --set genw.bat --nocheck
Monitor Type
Monitor Type
Value
Synchronous (default)
1
Asynchronous
0
clpcfadm.py mod -t monitor/genw@genw1/parameters/sync --set <Value>
Normal Return Value
Default: 0
clpcfadm.py mod -t monitor/genw@genw1/parameters/normalval --set <Value>
Warning Return Value
clpcfadm.py mod -t monitor/genw@genw1/parameters/warningval --set <Value>
Kill the application when exit
Kill the application when exit
Value
Yes
1
No (default)
0
clpcfadm.py mod -t monitor/genw@genw1/parameters/termination --set <Value>
Wait for activation monitoring to stop before stopping the cluster
Wait for activation monitoring to stop before stopping the cluster
Value
Wait for the stop
1
Do not wait for the stop (default)
0
clpcfadm.py mod -t monitor/genw@genw1/parameters/waitstop --set <Value>
Exec User
clpcfadm.py mod -t monitor/genw@genw1/parameters/account --set <Exec User>
8.19.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/genw@genw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/genw@genw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/genw@genw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/genw@genw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/genw@genw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/genw@genw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/genw@genw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/genw@genw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/genw@genw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/genw@genw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/genw@genw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/genw@genw1/emergency/preaction/account --set <Exec User>
8.19.3. Deleting a custom monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon genw genw1
8.20. Hybrid disk TUR monitor resource¶
Note
8.20.1. Adding a hybrid disk TUR monitor resource¶
Be sure to set the following items. For details, see "Setting hybrid disk TUR monitor resource parameters".
Item (mandatory)
Monitor resource name
Hybrid disk resource
Recovery target (hybrid disk resource name)
Recovery target type (rsc)
clpcfadm.py add mon hdtw hdtw1 clpcfadm.py mod -t monitor/hdtw@hdtw1/parameters/object --set <Hybrid disk resource> clpcfadm.py mod -t monitor/hdtw@hdtw1/relation/name --set <Hybrid disk resource name> --nocheck clpcfadm.py mod -t monitor/hdtw@hdtw1/relation/type --set rsc --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.20.2. Setting hybrid disk TUR monitor resource parameters¶
8.20.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/hdtw@hdtw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.20.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/hdtw@hdtw1/polling/interval --set <Value>
Timeout (sec)
Default, 300 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/hdtw@hdtw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/hdtw@hdtw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/hdtw@hdtw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always (default)
0
Active
1
clpcfadm.py mod -t monitor/hdtw@hdtw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/hdtw@hdtw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/hdtw@hdtw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/hdtw@hdtw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/hdtw@hdtw1/perf/metrics/use --set <Value>
8.20.2.3. Monitor (special)¶
Hybrid Disk Resource
clpcfadm.py mod -t monitor/hdtw@hdtw1/parameters/object --set <Hybrid Disk Resource>
Note
You can specify only a hybrid disk resource.
8.20.2.4. Recovery Action¶
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/hdtw@hdtw1/emergency/preaction/account --set <Exec User>
8.20.3. Deleting a hybrid disk TUR monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon hdtw hdtw1
8.21. Hybrid disk monitor resource¶
Note
8.21.1. Adding a hybrid disk monitor resource¶
Be sure to set the following items. For details, see "Setting hybrid disk monitor resource parameters".
Item (mandatory)
Monitor resource name
Hybrid disk resource
Recovery target (hybrid disk resource name)
Recovery target type (rsc)
clpcfadm.py add mon hdw hdw1 clpcfadm.py mod -t monitor/hdw@hdw1/parameters/object --set <Hybrid disk resource> clpcfadm.py mod -t monitor/hdw@hdw1/relation/name --set <Hybrid disk resource name> --nocheck clpcfadm.py mod -t monitor/hdw@hdw1/relation/type --set rsc --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.21.2. Setting hybrid disk monitor resource parameters¶
8.21.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/hdw@hdw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.21.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/hdw@hdw1/polling/interval --set <Value>
Timeout (sec)
Default, 999 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/hdw@hdw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/hdw@hdw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 10 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/hdw@hdw1/firstmonwait --set <Value>
Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/hdw@hdw1/perf/metrics/use --set <Value>
8.21.2.3. Monitor (special)¶
Hybrid Disk Resource
clpcfadm.py mod -t monitor/hdw@hdw1/parameters/object --set <Hybrid Disk Resource>
Note
You can specify only a hybrid disk resource.
8.21.2.4. Recovery Action¶
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/hdw@hdw1/emergency/preaction/account --set <Exec User>
8.21.3. Deleting a hybrid disk monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon hdw hdw1
8.22. HTTP monitor resource¶
Note
8.22.1. Adding an HTTP monitor resource¶
Be sure to set the following items. For details, see "Setting HTTP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon httpw httpw1 clpcfadm.py mod -t monitor/httpw@httpw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/httpw@httpw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/httpw@httpw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.22.2. Setting HTTP monitor resource parameters¶
8.22.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/httpw@httpw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.22.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/httpw@httpw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/httpw@httpw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 3 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/httpw@httpw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/httpw@httpw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/httpw@httpw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/httpw@httpw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/httpw@httpw1/perf/metrics/use --set <Value>
8.22.2.3. Monitor (special)¶
Connecting Destination (Within 255 bytes)
Default: 127.0.0.1
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/ipaddress --set <Connecting Destination>
Port Number
Default, 80 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/port --set <Value>
Monitor URI (Within 255 bytes)
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/uri --set <Request URI>
Protocol
Protocol
Value
HTTP (default)
0
HTTPS
1
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/https --set <Value>
Note
If necessary, also change the setting for "Port Number".
Request Type
Request Type
Value
HEAD (default)
0
GET
1
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/requesttype --set <Value>
Authentication Method
Authentication Method
Value
No authentication (default)
0
Basic authentication
1
Digest authentication
2
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/authmethod --set <Value>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/username --set <User Name>
Note
Set as above with "Authentication Method" set to "Basic authentication" or "Digest authentication".
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/password --set <Encrypted password>
Note
Set as above with "Authentication Method" set to "Basic authentication" or "Digest authentication".
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Client Authentication
Client Authentication
Value
Set
1
Do not set (default)
0
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/clientauth --set <Value>
Note
You can set this parameter with "Protocol" set to "HTTPS".
Client Certificate Subject Name (Within 64 bytes)
clpcfadm.py mod -t monitor/httpw@httpw1/agentparam/clientcertsubject --set <Client Certificate>
Note
Set as above with "Client Authentication" set to "Set".
8.22.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/httpw@httpw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/httpw@httpw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/httpw@httpw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/httpw@httpw1/emergency/preaction/account --set <Exec User>
8.22.3. Deleting an HTTP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon httpw httpw1
8.23. IMAP4 monitor resource¶
Note
8.23.1. Adding an IMAP4 monitor resource¶
Be sure to set the following items. For details, see "Setting IMAP4 monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon imap4w imap4w1 clpcfadm.py mod -t monitor/imap4w@imap4w1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/imap4w@imap4w1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/imap4w@imap4w1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.23.2. Setting IMAP4 monitor resource parameters¶
8.23.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/imap4w@imap4w1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.23.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/imap4w@imap4w1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/imap4w@imap4w1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 3 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/imap4w@imap4w1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/imap4w@imap4w1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/imap4w@imap4w1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/imap4w@imap4w1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/imap4w@imap4w1/perf/metrics/use --set <Value>
8.23.2.3. Monitor (special)¶
IP Address
Default: 127.0.0.1
clpcfadm.py mod -t monitor/imap4w@imap4w1/agentparam/ipaddress --set <IP Address>
Port Number
Default, 143 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/imap4w@imap4w1/agentparam/port --set <Value>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/imap4w@imap4w1/agentparam/username --set <User Name>
Password (Within 189 bytes)
clpcfadm.py mod -t monitor/imap4w@imap4w1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Authentication Method
Authentication Method
Value
AUTHENTICATE LOGIN (default)
0
LOGIN
1
clpcfadm.py mod -t monitor/imap4w@imap4w1/agentparam/certificate --set <Value>
8.23.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/imap4w@imap4w1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/imap4w@imap4w1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation
1
Stop resource 45
16
Stop group 46
2
Stop the cluster service
3
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/imap4w@imap4w1/emergency/preaction/account --set <Exec User>
8.23.3. Deleting an IMAP4 monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon imap4w imap4w1
8.24. IP monitor resource¶
Note
8.24.1. Adding an IP monitor resource¶
Be sure to set the following items. For details, see "Setting IP monitor resource parameters".
Item (mandatory)
Monitor resource name
IP Address
Recovery target
Recovery target type
clpcfadm.py add mon ipw ipw1 clpcfadm.py mod -t monitor/ipw@ipw1/parameters/list@<ID>/ip --set <IP Address> --nocheck clpcfadm.py mod -t monitor/ipw@ipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ipw@ipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.24.2. Setting IP monitor resource parameters¶
8.24.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/ipw@ipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.24.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/ipw@ipw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/ipw@ipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/ipw@ipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/ipw@ipw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always (default)
0
Active
1
clpcfadm.py mod -t monitor/ipw@ipw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/ipw@ipw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/ipw@ipw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/ipw@ipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/ipw@ipw1/perf/metrics/use --set <Value>
8.24.2.3. Monitor (special)¶
IP Address
-
Add clpcfadm.py mod -t monitor/ipw@ipw1/parameters/list@<ID>/ip --set <IP Address> --nocheck
Note
With only one IP address to be monitored, specify 0 for ID.With more than one IP address to be monitored, specify consecutive numbers (e.g., 0, 1, 2...). (Maximum: 7)
-
Delete clpcfadm.py mod -t monitor/ipw@ipw1/parameters/list@<ID> --delete
-
Ping Timeout (msec)
Default, 5000 (minimum, 1; maximum, 999999)
clpcfadm.py mod -t monitor/ipw@ipw1/parameters/pingtimeout --set <Value> --nocheck
8.24.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/ipw@ipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ipw@ipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/ipw@ipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/ipw@ipw1/emergency/preaction/account --set <Exec User>
8.24.3. Deleting an IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon ipw ipw1
8.25. JVM monitor resource¶
Note
8.25.1. Adding a JVM monitor resource¶
Note
Please set Java installation path in JVM monitor on the cluster property before creating a JVM monitor resource.
Be sure to set the following items. For details, see "Setting JVM monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
JVM Type
Identifier
Connection Port
Target
Recovery target
Recovery target type
Number of JVM monitor resources
clpcfadm.py add mon jraw jraw1 clpcfadm.py mod -t monitor/jraw@jraw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvmtype --set <JVM Type> clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/name --set <Identifier> clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/port --set <Connection Port> clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/servertype --set <Target> clpcfadm.py mod -t monitor/jraw@jraw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/jraw@jraw1/relation/type --set <Recovery target type> --nocheck clpcfadm.py mod -t monitor/jraw@jraw1/parameters/targetnum --set <Number of JVM monitor resources>Note
With only one JVM monitor, specify 0 for Number of JVM monitor resources.With more than one JVM monitor, specify consecutive numbers (e.g., 0, 1, 2...). (Maximum: 24)Note
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.25.2. Setting JVM monitor resource parameters¶
8.25.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.25.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/jraw@jraw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/jraw@jraw1/polling/timeout --set <Value>
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/jraw@jraw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/jraw@jraw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always
0
Active (default)
1
clpcfadm.py mod -t monitor/jraw@jraw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/jraw@jraw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/jraw@jraw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/jraw@jraw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/perf/metrics/use --set <Value>
8.25.2.3. Monitor (special)¶
Target
Target
Value(targettypeidx)
Value(servertype)
WebLogic Server (default)
0
weblogic
WebOTX Domain Agent
1
webotx
WebOTX Process Group
2
sun
Tomcat
3
sun
WebOTX ESB
4
sun
WebSAM SVF
5
sun
Java Application
6
sun
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/targettypeidx --set <Value(targettypeidx)> clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/servertype --set <Value(servertype)>
JVM Type
Value
Oracle Java (default)
Oracle Java(usage monitoring)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvmtype --set <Value>
Note
Enclose in double quotes a string including spaces (e.g., "Oracle Java").
Identifier (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/name --set <Identifier>
Connection Port
Default, None (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/port --set <Value>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/user/id --set <User Name>
Note
Set as above with "Target" set to "WebOTX Domain Agent".
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/user/passwd --set <Encrypted password>
Note
Set as above with "Target" set to "WebOTX Domain Agent".
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/jvm/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes (e.g., "cmd").
-
Tuning -
Memory -
If "JVM Type" is set to "Oracle Java": Monitor Heap Memory Rate
Monitor Heap Memory Rate
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heapgroup/check --set <Value>
Total Usage
Total Usage
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heap/check --set <Value>
Total Usage (%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heap/threshold --set <Value>
Eden Space
Eden Space
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/eden/check --set <Value>
Eden Space(%)
Default, 100 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/eden/threshold --set <Value>
Survivor Space
Survivor Space
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/survivor/check --set <Value>
Survivor Space(%)
Default, 100 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/survivor/threshold --set <Value>
Tenured Gen
Tenured Gen
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/tenured/check --set <Value>
Tenured Gen(%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/tenured/threshold --set <Value>
Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heapgroup/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes.
Monitor Non-Heap Memory Rate
Monitor Non-Heap Memory Rate
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheapgroup/check --set <Value>
Total Usage
Total Usage
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheap/check --set <Value>
Total Usage (%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheap/threshold --set <Value>
Code Cache
Code Cache
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/codecash/check --set <Value>
Code Cache(%)
Default, 100 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/codecash/threshold --set <Value>
Perm Gen
Perm Gen
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/perm/check --set <Value>
Perm Gen(%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/perm/threshold --set <Value>
Perm Gen[shared-ro]
Perm Gen[shared-ro]
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/perm/ro/check --set <Value>
Perm Gen[shared-ro](%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/perm/ro/threshold --set <Value>
Perm Gen[shared-rw]
Perm Gen[shared-rw]
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/perm/rw/check --set <Value>
Perm Gen[shared-rw](%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/perm/rw/threshold --set <Value>
Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheapgroup/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes.
-
If "JVM Type" is set to "Oracle Java (usage monitoring)": Monitor Heap Memory Rate
Monitor Heap Memory Rate
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heapgroup/maxcheck --set <Value>
Total Usage
Total Usage
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heap/check --set <Value>
Total Usage (MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heap/maxsize --set <Value>
Eden Space
Eden Space
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/eden/check --set <Value>
Eden Space(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/eden/maxsize --set <Value>
Survivor Space
Survivor Space
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/survivor/check --set <Value>
Survivor Space(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/survivor/maxsize --set <Value>
Tenured Gen(Old Gen)
Tenured Gen(Old Gen)
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/tenured/check --set <Value>
Tenured Gen(Old Gen)(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/tenured/maxsize --set <Value>
Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/heapgroup/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes.
Monitor Non-Heap Memory Rate
Monitor Non-Heap Memory Rate
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheapgroup/maxcheck --set <Value>
Total Usage
Total Usage
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheap/check --set <Value>
Total Usage (MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheap/maxsize --set <Value>
Code Cache
Code Cache
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/codecash/check --set <Value>
Code Cache(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/codecash/maxsize --set <Value>
CodeHeap non-nmethods
CodeHeap non-nmethods
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonnmethods/check --set <Value>
CodeHeap non-nmethods(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonnmethods/maxsize --set <Value>
Note
Set as above with "Code Cache" set to "Do not monitor".
CodeHeap profiled
CodeHeap profiled
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/profilednmethods/check --set <Value>
CodeHeap profiled(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/profilednmethods/maxsize --set <Value>
Note
Set as above with "Code Cache" set to "Do not monitor".
CodeHeap non-profiled
CodeHeap non-profiled
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonprofilednmethods/check --set <Value>
CodeHeap non-profiled(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonprofilednmethods/maxsize --set <Value>
Note
Set as above with "Code Cache" set to "Do not monitor".
Compressed Class Space
Compressed Class Space
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/ccs/check --set <Value>
Compressed Class Space(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/ccs/maxsize --set <Value>
Metaspace
Metaspace
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/metaspace/check --set <Value>
Metaspace(MB)
Default, 0 (minimum, 0; maximum, 102400)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/metaspace/maxsize --set <Value>
Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/memory/nonheapgroup/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes.
-
-
Thread Monitor the number of Active Threads
Monitor the number of Active Threads
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/thread/count/check --set <Value>
(Thread)
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/thread/count/threshold --set <Value>
Note
Set as above with "Monitor the number of Active Threads" set to "Monitor".
Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/thread/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes.
-
GC Monitor the time in Full GC
Monitor the time in Full GC
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/gc/time/check --set <Value>
(msec)
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/gc/time/threshold --set <Value>
Monitor the count of Full GC execution
Monitor the count of Full GC execution
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/gc/cont/check --set <Value>
(count)
Default, 1 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/gc/cont/threshold --set <Value>
Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/gc/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes.
-
WebLogic Note
To set the following items, set "Target" to "WebLogic Server" in advance.
Monitor the requests in Work Manager
Monitor the requests in Work Manager
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/wm/check --set <Value>
Target Work Managers (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/work/manager --set <Target Work Managers>
Note
Set as above with "Monitor the requests in Work Manager" set to "Monitor".
-
Waiting Requests Note
To set the following items, set "Monitor the requests in Work Manager" to "Monitor" in advance.
The number
The number
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/wm/pending/requests/chkthreshold --set <Value>
The number
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/wm/pending/requests/threshold --set <Value>
Average
Average
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/wm/pending/requests/avg/chkthreshold --set <Value>
Average
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/wm/pending/requests/avg/threshold --set <Value>
Increment from the last
Increment from the last
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/wm/pending/requests/chkincrement --set <Value>
Increment from the last (%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/wm/pending/requests/increment --set <Value>
Monitor the requests in Thread Pool
Monitor the requests in Thread Pool
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/check --set <Value>
-
Waiting Requests Note
To set the following items, set "Monitor the requests in Thread Pool" to "Monitor" in advance.
The number
The number
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/pending/requests/chkthreshold --set <Value>
The number
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/pending/requests/threshold --set <Value>
Average
Average
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/pending/requests/avg/chkthreshold --set <Value>
Average
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/pending/requests/avg/threshold --set <Value>
Increment from the last
Increment from the last
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/pending/requests/chkincrement --set <Value>
Increment from the last (%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/pending/requests/increment --set <Value>
-
Executing Requests Note
To set the following items, set "Monitor the requests in Thread Pool" to "Monitor" in advance.
The number
The number
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/throughput/chkthreshold --set <Value>
The number
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/throughput/threshold --set <Value>
Average
Average
Value
Enable
1
Do not enable (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/throughput/avg/chkthreshold --set <Value>
Average
Default, 65535 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/throughput/avg/threshold --set <Value>
Increment from the last
Increment from the last
Value
Enable (default)
1
Do not enable
0
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/throughput/chkincrement --set <Value>
Increment from the last (%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/tp/throughput/increment --set <Value>
Command (Within 255 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/parameters/wl/action/down/runcommand --set <Command>
Note
Enclose the path with double quotes.
-
8.25.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/jraw@jraw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/jraw@jraw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/jraw@jraw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/jraw@jraw1/emergency/preaction/account --set <Exec User>
8.25.3. Deleting a JVM monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon jraw jraw1
8.26. Mirror disk monitor resource¶
Note
8.26.1. Adding a mirror disk monitor resource¶
Be sure to set the following items. For details, see "Setting mirror disk monitor resource parameters".
Item (mandatory)
Monitor resource name
Mirror Disk Resource
Recovery target (Mirror Disk Resource name)
Recovery target type (rsc)
clpcfadm.py add mon mdw mdw1 clpcfadm.py mod -t monitor/mdw@mdw1/parameters/object --set <Mirror Disk Resource> clpcfadm.py mod -t monitor/mdw@mdw1/relation/name --set <Mirror Disk Resource name> --nocheck clpcfadm.py mod -t monitor/mdw@mdw1/relation/type --set rsc --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.26.2. Setting mirror disk monitor resource parameters¶
8.26.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/mdw@mdw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.26.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/mdw@mdw1/polling/interval --set <Value>
Timeout (sec)
Default, 999 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/mdw@mdw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/mdw@mdw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 10 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/mdw@mdw1/firstmonwait --set <Value>
Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/mdw@mdw1/perf/metrics/use --set <Value>
8.26.2.3. Monitor (special)¶
Mirror Disk Resource
clpcfadm.py mod -t monitor/mdw@mdw1/parameters/object --set <Mirror Disk Resource>
Note
You can specify only a mirror disk resource.
8.26.2.4. Recovery Action¶
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/preaction/use --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/mdw@mdw1/emergency/preaction/account --set <Exec User>
8.26.3. Deleting a mirror disk monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon mdw mdw1
8.27. NIC Link Up/Down monitor resource¶
Note
8.27.1. Adding an NIC Link Up/Down monitor resource¶
Be sure to set the following items. For details, see "Setting NIC Link Up/Down monitor resource parameters".
Item (mandatory)
Monitor resource name
IP Address
Recovery target
Recovery target type
clpcfadm.py add mon miiw miiw1 clpcfadm.py mod -t monitor/miiw@miiw1/server@<Server name>/parameters/object --set <IP Address> --nocheck clpcfadm.py mod -t monitor/miiw@miiw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/miiw@miiw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.27.2. Setting NIC Link Up/Down monitor resource parameters¶
8.27.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/miiw@miiw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.27.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/miiw@miiw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/miiw@miiw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/miiw@miiw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/miiw@miiw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always (default)
0
Active
1
clpcfadm.py mod -t monitor/miiw@miiw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/miiw@miiw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/miiw@miiw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/miiw@miiw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/miiw@miiw1/perf/metrics/use --set <Value>
8.27.2.3. Monitor (special)¶
-
Set Up Individually Set the following for each server.
IP Address
clpcfadm.py mod -t monitor/miiw@miiw1/server@<Server name>/parameters/object --set <IP Address> --nocheck
Note
If you delete a server, set as follows:
clpcfadm.py mod -t monitor/miiw@miiw1/server@<Server name> --delete
8.27.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/miiw@miiw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/miiw@miiw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/miiw@miiw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/miiw@miiw1/emergency/preaction/account --set <Exec User>
8.27.3. Deleting an NIC Link Up/Down monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon miiw miiw1
8.28. Eternal link monitor resource¶
Note
8.28.1. Adding an eternal link monitor resource¶
Be sure to set the following items. For details, see "Setting eternal link monitor resource parameters".
Item (mandatory)
Monitor resource name
Category
Recovery target
Recovery target type
clpcfadm.py add mon mrw mrw1 clpcfadm.py mod -t monitor/mrw@mrw1/parameters/object --set <Category> clpcfadm.py mod -t monitor/mrw@mrw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/mrw@mrw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.28.2. Setting eternal link monitor resource parameters¶
8.28.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/mrw@mrw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.28.2.2. Monitor (common)¶
Interval (sec)
Default, 10 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/mrw@mrw1/polling/interval --set <Value>
Retry Count
Default, 0 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/mrw@mrw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/mrw@mrw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/mrw@mrw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).
8.28.2.3. Monitor (special)¶
-
Common Category (Within 32 bytes)
clpcfadm.py mod -t monitor/mrw@mrw1/parameters/object --set <Category>
Keyword (Within 1023 bytes)
clpcfadm.py mod -t monitor/mrw@mrw1/parameters/target --set <Keyword> --nocheck
-
Set Up Individually Set the following for each server.
Keyword (Within 1023 bytes)
clpcfadm.py mod -t monitor/mrw@mrw1/server@<Server name>/parameters/target --set <Keyword> --nocheck
Note
To return to the common settings, set the following for each server.
clpcfadm.py mod -t monitor/mrw@mrw1/server@<Server name> --delete
8.28.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/mrw@mrw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/mrw@mrw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "All groups ([All Groups])"
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/action --set 1
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/mode --set <Value>
Execute Failover to outside the Server Group
Execute Failover to outside the Server Group
Value
Execute Failover to outside the Server Group
1
No (default)
0
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/site --set <Value>
Final Action
Final Action
Value
No operation (default)
1
Stop resource
16
Stop group
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/action --set <Value>
Execute Script before Recovery Action
Execute Script before Recovery Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/use --set <Value> clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/userestart --set <Value> clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/mrw@mrw1/emergency/preaction/account --set <Exec User>
8.28.3. Deleting an eternal link monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon mrw mrw1
8.29. Multi target monitor resource¶
Note
8.29.1. Adding a multi-target monitor resource¶
Be sure to set the following items. For details, see "Setting multi target monitor resource parameters".
Item (mandatory)
Monitor resource name
Target monitor resource name
Target monitor resource type
Recovery target
Recovery target type
clpcfadm.py add mon mtw mtw1 clpcfadm.py mod -t monitor/mtw@mtw1/parameters/list@<ID>/member --set <Target monitor resource name> --nocheck clpcfadm.py mod -t monitor/mtw@mtw1/parameters/list@<ID>/type --set <Target monitor resource type> --nocheck clpcfadm.py mod -t monitor/mtw@mtw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/mtw@mtw1/relation/type --set <Recovery target type> --nocheck clpcfadm.py mod -t monitor/<Monitor resource type>@<Monitor resource name>/multi --set 1 --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.29.2. Setting multi target monitor resource parameters¶
8.29.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/mtw@mtw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.29.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/mtw@mtw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/mtw@mtw1/polling/timeout --set <Value>
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/mtw@mtw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/mtw@mtw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always (default)
0
Active
1
clpcfadm.py mod -t monitor/mtw@mtw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/mtw@mtw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/mtw@mtw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/mtw@mtw1/perf/metrics/use --set <Value>
8.29.2.3. Monitor (special)¶
Monitor Resource
-
Add clpcfadm.py mod -t monitor/mtw@mtw1/parameters/list@<ID>/member --set <Monitor resource name> --nocheck clpcfadm.py mod -t monitor/mtw@mtw1/parameters/list@<ID>/type --set <Monitor resource type> --nocheck clpcfadm.py mod -t monitor/<Monitor resource type>@<Monitor resource name>/multi --set 1 --nocheck
Note
With only one monitor resource to be added, specify 0 for ID.With more than one monitor resource to be added, specify consecutive numbers (e.g., 0, 1, 2...).Note
Set "Monitor resource type" to any of the following values:
Monitor resource type
Value
Application monitor resource
appliw
AWS AZ monitor resource
awsazw
AWS DNS monitor resource
awsdnsw
AWS Elastic IP monitor resource
awseipw
AWS Secondary IP monitor resource
awssipw
AWS Virtual IP monitor resource
awsvipw
Azure DNS monitor resource
azurednsw
Azure load balance monitor resource
azurelbw
Azure probe port monitor resource
azureppw
CIFS monitor resource
cifsw
DB2 monitor resource
db2w
Disk RW monitor resource
diskw
Floating IP monitor resource
fipw
FTP monitor resource
ftpw
Google Cloud DNS monitor resource
gcdnsw
Google Cloud load balance monitor resource
gclbw
Google Cloud Virtual IP monitor resource
gcvipw
Custom monitor resource
genw
HTTP monitor resource
httpw
IMAP4 monitor resource
imap4w
IP monitor resource
ipw
JVM monitor resource
jraw
NIC Link Up/Down monitor resource
miiw
Eternal link monitor resource
mrw
Oracle Cloud DNS monitor resource
ocdnsw
Oracle Cloud load balance monitor resource
oclbw
Oracle Cloud Virtual IP monitor resource
ocvipw
ODBC monitor resource
odbcw
Oracle monitor resource
oraclew
WebOTX monitor resource
otxw
POP3 monitor resource
pop3w
PostgreSQL monitor resource
psqlw
Process resource monitor resource
psrw
Process name monitor resource
psw
Disk TUR monitor resource
sdw
Service monitor resource
servicew
SMTP monitor resource
smtpw
SQL Server monitor resource
sqlserverw
System monitor resource
sraw
Tuxedo monitor resource
tuxw
Virtual IP monitor resource
vipw
WebSphere monitor resource
wasw
WebLogic monitor resource
wlsw
-
Delete clpcfadm.py mod -t monitor/mtw@mtw1/parameters/list@<ID> --delete clpcfadm.py mod -t monitor/<Monitor resource type>@<Monitor resource name>/multi --set 0
-
-
Tuning Failure Threshold
Failure Threshold
Value
Same as Number of Members (default)
0
Specify Number
1
clpcfadm.py mod -t monitor/mtw@mtw1/parameters/info/seterr --set <Value>
Specify Number
Default, 64 (minimum, 1; maximum, 64)
clpcfadm.py mod -t monitor/mtw@mtw1/parameters/info/errnum --set <Value>
Warning Threshold (Specify Number)
Default, None (minimum, 1; maximum, 63)
clpcfadm.py mod -t monitor/mtw@mtw1/parameters/info/caunum --set <Value>
Note
With "Failure Threshold" set to "Specify Number", set "Warning Threshold" to a value smaller than "Failure Threshold".
Note
To turn off "Warning Threshold", specify 0.
clpcfadm.py mod -t monitor/mtw@mtw1/parameters/info/caunum --set 0
8.29.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/mtw@mtw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/mtw@mtw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/mtw@mtw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/mtw@mtw1/emergency/preaction/account --set <Exec User>
8.29.3. Deleting a multi target monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon mtw mtw1 clpcfadm.py mod -t monitor/<Monitor resource type>@<Monitor resource name>/multi --set 0
8.30. Oracle Cloud DNS monitor resource¶
Note
8.30.1. Adding an Oracle Cloud DNS monitor resource¶
Be sure to set the following items. For details, see "Setting Oracle Cloud DNS monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon ocdnsw ocdnsw1 clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/parameters/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.30.2. Setting Oracle Cloud DNS monitor resource parameters¶
8.30.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.30.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 300 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a Oracle Cloud DNS resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/perf/metrics/use --set <Value>
8.30.2.3. Monitor (special)¶
Check Name Resolution
Check Name Resolution
Value
Check Name Resolution (default)
1
Do not check name resolution
0
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/parameters/dnscheck --set <Value>
8.30.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 55
16
Stop group 56
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/ocdnsw@ocdnsw1/emergency/preaction/account --set <Exec User>
8.30.3. Deleting an Oracle Cloud DNS monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon ocdnsw ocdnsw1
8.31. Oracle Cloud load balance monitor resource¶
Note
8.31.1. Adding an Oracle Cloud load balance monitor resource¶
Be sure to set the following items. For details, see "Setting Oracle Cloud load balance monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource
Recovery target
Recovery target type
clpcfadm.py add mon oclbw oclbw1 clpcfadm.py mod -t monitor/oclbw@oclbw1/parameters/object --set <Target Resource> clpcfadm.py mod -t monitor/oclbw@oclbw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/oclbw@oclbw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.31.2. Setting Oracle Cloud load balance monitor resource parameters¶
8.31.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/oclbw@oclbw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.31.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/oclbw@oclbw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/oclbw@oclbw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/oclbw@oclbw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/oclbw@oclbw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/oclbw@oclbw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/oclbw@oclbw1/perf/metrics/use --set <Value>
8.31.2.3. Monitor (special)¶
Target Resource
clpcfadm.py mod -t monitor/oclbw@oclbw1/parameters/object --set <Target Resource>
Note
You can specify only an Oracle Cloud Virtual IP resource.
8.31.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/oclbw@oclbw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/oclbw@oclbw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/oclbw@oclbw1/emergency/preaction/account --set <Exec User>
8.31.3. Deleting an Oracle Cloud load balance monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon oclbw oclbw1
8.32. Oracle Cloud Virtual IP monitor resource¶
Note
8.32.1. Adding an Oracle Cloud Virtual IP monitor resource¶
Be sure to set the following items. For details, see "Setting Oracle Cloud Virtual IP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon ocvipw ocvipw1 clpcfadm.py mod -t monitor/ocvipw@ocvipw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/ocvipw@ocvipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ocvipw@ocvipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.32.2. Setting Oracle Cloud Virtual IP monitor resource parameters¶
8.32.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.32.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/target --set <Target Resource (monitored when active)>
Note
You can specify only an Oracle Cloud Virtual IP resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/perf/metrics/use --set <Value>
8.32.2.3. Monitor (special)¶
Health Check Timeout Operation
Health Check Timeout Operation
Value
Disable recovery action(Do nothing) (default)
0
Disable recovery action(Display warning)
1
Recover
2
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/parameters/mode --set <Value>
8.32.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/ocvipw@ocvipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 59
16
Stop group 60
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/ocvipw@ocvipw1/emergency/preaction/account --set <Exec User>
8.32.3. Deleting an Oracle Cloud Virtual IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon ocvipw ocvipw1
8.33. ODBC monitor resource¶
Note
8.33.1. Adding an ODBC monitor resource¶
Be sure to set the following items. For details, see "Setting ODBC monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Data Source Name
Recovery target
Recovery target type
clpcfadm.py add mon odbcw odbcw1 clpcfadm.py mod -t monitor/odbcw@odbcw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/odbcw@odbcw1/agentparam/dbname --set <Data Source Name> clpcfadm.py mod -t monitor/odbcw@odbcw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/odbcw@odbcw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.33.2. Setting ODBC monitor resource parameters¶
8.33.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/odbcw@odbcw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.33.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/odbcw@odbcw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/odbcw@odbcw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/odbcw@odbcw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/odbcw@odbcw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/odbcw@odbcw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/odbcw@odbcw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/odbcw@odbcw1/perf/metrics/use --set <Value>
8.33.2.3. Monitor (special)¶
Monitor Level
Monitor Level
Value
Level 1 (monitoring by select)
3
Level 2 (monitoring by update/select) (default)
0
clpcfadm.py mod -t monitor/odbcw@odbcw1/agentparam/docreatedrop --set <Value>
Data Source Name (Within 255 bytes)
clpcfadm.py mod -t monitor/odbcw@odbcw1/agentparam/dbname --set <Data Source Name>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/odbcw@odbcw1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/odbcw@odbcw1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Monitor Table Name (Within 255 bytes)
Default: ODBCWATCH
clpcfadm.py mod -t monitor/odbcw@odbcw1/agentparam/tablename --set <Monitor Table Name>
8.33.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/odbcw@odbcw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/odbcw@odbcw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/odbcw@odbcw1/emergency/preaction/account --set <Exec User>
8.33.3. Deleting an ODBC monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon odbcw odbcw1
8.34. Oracle monitor resource¶
Note
8.34.1. Adding an Oracle monitor resource¶
Be sure to set the following items. For details, see "Setting Oracle monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Connect Command
Recovery target
Recovery target type
clpcfadm.py add mon oraclew oraclew1 clpcfadm.py mod -t monitor/oraclew@oraclew1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/dbname --set <Connect Command> --nocheck clpcfadm.py mod -t monitor/oraclew@oraclew1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/oraclew@oraclew1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.34.2. Setting Oracle monitor resource parameters¶
8.34.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/oraclew@oraclew1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.34.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/oraclew@oraclew1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/oraclew@oraclew1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/oraclew@oraclew1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/oraclew@oraclew1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/oraclew@oraclew1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/oraclew@oraclew1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/perf/metrics/use --set <Value>
8.34.2.3. Monitor (special)¶
Monitor Method
Monitor Method
Value
Listener and Instance Monitor (default)
0
Listener Monitor
1
Instance Monitor
2
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/monmethod --set <Value>
Monitor Level
Monitor Level
Value
Level 0 (database status)
2
Level 1 (monitoring by select)
3
Level 2 (monitoring by update/select) (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/docreatedrop --set <Value>
Connect Command (Within 255 bytes)
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/dbname --set <Connect Command> --nocheck
User Name (Within 255 bytes)
Default: sys
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".OS Authentication
OS Authentication
Value
Perform OS authentication
1
Do not perform OS authentication (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/os --set <Value>
Authority Method
Authority Method
Value
SYSDBA (default)
0
DEFAULT
1
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/certificate --set <Value>
Monitor Table Name (Within 255 bytes)
Default: ORAWATCH
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/tablename --set <Monitor Table Name>
ORACLE_HOME (Within 255 bytes)
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/oraclehome --set <ORACLE_HOME>
Character Set
Value
(Following the setting of the application)
AMERICAN_AMERICA.US7ASCII
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/characterset --set <Value> --nocheck
Collect detailed application information at failure occurrence
Collect detailed application information at failure occurrence
Value
Collect
1
Do not collect (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/infocollect/use --set <Value>
Collection Timeout (sec)
Default, 600 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/infocollect/timeout --set <Value>
Note
Set as above with "Collect detailed application information at failure occurrence" set to "Collect".
Set error during Oracle initialization or shutdown
Set error during Oracle initialization or shutdown
Value
Yes
1
No (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/agentparam/ignoreuse --set <Value>
8.34.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/oraclew@oraclew1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/oraclew@oraclew1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation
1
Stop resource 63
16
Stop group 64
2
Stop the cluster service
3
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/oraclew@oraclew1/emergency/preaction/account --set <Exec User>
8.34.3. Deleting an Oracle monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon oraclew oraclew1
8.35. WebOTX monitor resource¶
Note
8.35.1. Adding a WebOTX monitor resource¶
Be sure to set the following items. For details, see "Setting WebOTX monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
User Name
Recovery target
Recovery target type
clpcfadm.py add mon otxw otxw1 clpcfadm.py mod -t monitor/otxw@otxw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/otxw@otxw1/parameters/username --set <User Name> clpcfadm.py mod -t monitor/otxw@otxw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/otxw@otxw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.35.2. Setting WebOTX monitor resource parameters¶
8.35.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/otxw@otxw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.35.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/otxw@otxw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/otxw@otxw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/otxw@otxw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/otxw@otxw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/otxw@otxw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/otxw@otxw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/otxw@otxw1/perf/metrics/use --set <Value>
8.35.2.3. Monitor (special)¶
Connecting Destination (Within 255 bytes)
Default: localhost
clpcfadm.py mod -t monitor/otxw@otxw1/parameters/servername --set <Connecting Destination>
Port Number
Default, 6212 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/otxw@otxw1/parameters/port --set <Value>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/otxw@otxw1/parameters/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/otxw@otxw1/parameters/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Install Path (Within 1023 bytes)
clpcfadm.py mod -t monitor/otxw@otxw1/parameters/installpath --set <Install Path>
8.35.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/otxw@otxw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/otxw@otxw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/otxw@otxw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/otxw@otxw1/emergency/preaction/account --set <Exec User>
8.35.3. Deleting a WebOTX monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon otxw otxw1
8.36. POP3 monitor resource¶
Note
8.36.1. Adding a POP3 monitor resource¶
Be sure to set the following items. For details, see "Setting POP3 monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon pop3w pop3w1 clpcfadm.py mod -t monitor/pop3w@pop3w1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/pop3w@pop3w1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/pop3w@pop3w1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.36.2. Setting POP3 monitor resource parameters¶
8.36.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/pop3w@pop3w1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.36.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/pop3w@pop3w1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/pop3w@pop3w1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 3 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/pop3w@pop3w1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/pop3w@pop3w1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/pop3w@pop3w1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/pop3w@pop3w1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/pop3w@pop3w1/perf/metrics/use --set <Value>
8.36.2.3. Monitor (special)¶
IP Address
Default: 127.0.0.1
clpcfadm.py mod -t monitor/pop3w@pop3w1/agentparam/ipaddress --set <IP Address>
Port Number
Default, 110 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/pop3w@pop3w1/agentparam/port --set <Value>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/pop3w@pop3w1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/pop3w@pop3w1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Authentication Method
Authentication Method
Value
APOP (default)
0
USER/PASS
1
clpcfadm.py mod -t monitor/pop3w@pop3w1/agentparam/certificate --set <Value>
8.36.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/pop3w@pop3w1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/pop3w@pop3w1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/pop3w@pop3w1/emergency/preaction/account --set <Exec User>
8.36.3. Deleting a POP3 monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon pop3w pop3w1
8.37. PostgreSQL monitor resource¶
Note
8.37.1. Adding a PostgreSQL monitor resource¶
Be sure to set the following items. For details, see "Setting PostgreSQL monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Database Name
Recovery target
Recovery target type
clpcfadm.py add mon psqlw psqlw1 clpcfadm.py mod -t monitor/psqlw@psqlw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/dbname --set <Database Name> --nocheck clpcfadm.py mod -t monitor/psqlw@psqlw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/psqlw@psqlw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.37.2. Setting PostgreSQL monitor resource parameters¶
8.37.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/psqlw@psqlw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.37.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/psqlw@psqlw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/psqlw@psqlw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/psqlw@psqlw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/psqlw@psqlw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/psqlw@psqlw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/psqlw@psqlw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/perf/metrics/use --set <Value>
8.37.2.3. Monitor (special)¶
Monitor Level
Monitor Level
Value
Level 1 (monitoring by select)
3
Level 2 (monitoring by update/select) (default)
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/docreatedrop --set <Value>
Database Name (Within 255 bytes)
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/dbname --set <Database Name> --nocheck
IP Address
Default: 127.0.0.1
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/ipaddress --set <IP Address>
Port Number
Default, 5432 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/port --set <Value>
User Name (Within 255 bytes)
Default: postgres
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Monitor Table Name (Within 255 bytes)
Default: PSQLWATCH
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/tablename --set <Monitor Table Name>
Set error during PostgreSQL initialization or shutdown
Set error during PostgreSQL initialization or shutdown
Value
Yes (default)
1
No
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/agentparam/ignoreuse --set <Value>
8.37.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/psqlw@psqlw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/psqlw@psqlw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/psqlw@psqlw1/emergency/preaction/account --set <Exec User>
8.37.3. Deleting a PostgreSQL monitor resources¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon psqlw psqlw1
8.38. Process resource monitor resource¶
Note
8.38.1. Adding a process resource monitor resource¶
Be sure to set the following items. For details, see "Setting process resource monitor resource parameters".
Item (mandatory)
Monitor resource name
Recovery target
Recovery target type
clpcfadm.py add mon psrw psrw1 clpcfadm.py mod -t monitor/psrw@psrw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/psrw@psrw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.38.2. Setting process resource monitor resource parameters¶
8.38.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/psrw@psrw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.38.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/psrw@psrw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/psrw@psrw1/polling/timeout --set <Value>
Retry Count
Default, 0 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/psrw@psrw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/psrw@psrw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/psrw@psrw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/psrw@psrw1/perf/metrics/use --set <Value>
8.38.2.3. Monitor (special)¶
Process Name (Within 1023 bytes)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/name --set <Process Name>
Monitoring CPU usage
Monitoring CPU usage
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/cpu/docheck --set <Value>
CPU usage (%)
Default, 90 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/cpu/rate --set <Value>
Note
Set as above with "Monitoring CPU usage" set to "Monitor".
Duration Time (min)
Default, 1440 (minimum, 1; maximum, 4320)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/cpu/count --set <Value>
Note
Set as above with "Monitoring CPU usage" set to "Monitor".
Monitoring usage of memory
Monitoring usage of memory
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/memory/docheck --set <Value>
Rate of Increase from the First Monitoring Point (%)
Default, 10 (minimum, 1; maximum, 1000)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/memory/rate --set <Value>
Note
Set as above with "Monitoring usage of memory" set to "Monitor".
Maximum Refresh Count
Default, 1440 (minimum, 1; maximum, 4320)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/memory/count --set <Value>
Note
Set as above with "Monitoring usage of memory" set to "Monitor".
Monitoring number of opening files (maximum number)
Monitoring number of opening files (maximum number)
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/fileleak/docheck --set <Value>
Refresh Count
Default, 1440 (minimum, 1; maximum, 4320)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/fileleak/count --set <Value>
Note
Set as above with "Monitoring number of opening files (maximum number)" set to "Monitor".
Monitoring number of running threads
Monitoring number of running threads
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/thread/docheck --set <Value>
Duration Time (min)
Default, 1440 (minimum, 1; maximum, 4320)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/thread/count --set <Value>
Note
Set as above with "Monitoring number of running threads" set to "Monitor".
Monitoring Processes of the Same Name
Monitoring Processes of the Same Name
Value
Monitor
1
Do not monitor (default)
0
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/proccount/docheck --set <Value>
Count
Default, 100 (minimum, 1; maximum, 10000)
clpcfadm.py mod -t monitor/psrw@psrw1/parameters/process/proccount/number --set <Value>
Note
You can set this parameter with "Monitoring Processes of the Same Name" set to "Monitor".
8.38.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/psrw@psrw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/psrw@psrw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/psrw@psrw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/psrw@psrw1/emergency/preaction/account --set <Exec User>
8.38.3. Deleting a process resource monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon psrw psrw1
8.39. Process name monitor resource¶
Note
8.39.1. Adding a process name monitor resource¶
Be sure to set the following items. For details, see "Setting process name monitor resource parameters".
Item (mandatory)
Monitor resource name
Process Name
Recovery target
Recovery target type
clpcfadm.py add mon psw psw1 clpcfadm.py mod -t monitor/psw@psw1/parameters/processname --set <Process Name> clpcfadm.py mod -t monitor/psw@psw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/psw@psw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.39.2. Setting process name monitor resource parameters¶
8.39.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/psw@psw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.39.2.2. Monitor (common)¶
Interval (sec)
Default, 5 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/psw@psw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/psw@psw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/psw@psw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/psw@psw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 0 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/psw@psw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 3 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/psw@psw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always (default)
0
Active
1
clpcfadm.py mod -t monitor/psw@psw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/psw@psw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/psw@psw1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/psw@psw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/psw@psw1/perf/metrics/use --set <Value>
8.39.2.3. Monitor (special)¶
Process Name (Within 1023 bytes)
clpcfadm.py mod -t monitor/psw@psw1/parameters/processname --set <Process Name>
Minimum Process Count
Default, 1 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/psw@psw1/parameters/processnum --set <Value>
8.39.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/psw@psw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/psw@psw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/psw@psw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/psw@psw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/psw@psw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/psw@psw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/psw@psw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psw@psw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psw@psw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/psw@psw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/psw@psw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/psw@psw1/emergency/preaction/account --set <Exec User>
8.39.3. Deleting a process name monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon psw psw1
8.40. Registry synchronization monitor resource¶
Note
8.40.1. Adding a registry synchronization monitor resource¶
Be sure to set the following items. For details, see "Setting registry synchronization monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon regsyncw regsyncw1 clpcfadm.py mod -t monitor/regsyncw@regsyncw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/regsyncw@regsyncw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/regsyncw@regsyncw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.40.2. Setting registry synchronization monitor resource parameters¶
8.40.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.40.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a registry synchronization resource for this monitor resource.
Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/perf/metrics/use --set <Value>
8.40.2.3. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/regsyncw@regsyncw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 75
16
Stop group 76
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/regsyncw@regsyncw1/emergency/preaction/account --set <Exec User>
8.40.3. Deleting a registry synchronization monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon regsyncw regsyncw1
8.41. Disk TUR monitor resource¶
Note
8.41.1. Adding a disk TUR monitor resource¶
Be sure to set the following items. For details, see "Setting disk TUR monitor resource parameters".
Item (mandatory)
Monitor resource name
Disk Resource
Recovery target
Recovery target type
clpcfadm.py add mon sdw sdw1 clpcfadm.py mod -t monitor/sdw@sdw1/parameters/object --set <Disk Resource> clpcfadm.py mod -t monitor/sdw@sdw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/sdw@sdw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.41.2. Setting disk TUR monitor resource parameters¶
8.41.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/sdw@sdw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.41.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/sdw@sdw1/polling/interval --set <Value>
Timeout (sec)
Default, 300 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/sdw@sdw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/sdw@sdw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/sdw@sdw1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always (default)
0
Active
1
clpcfadm.py mod -t monitor/sdw@sdw1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/sdw@sdw1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/sdw@sdw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a disk resource for this monitor resource.
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/sdw@sdw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/sdw@sdw1/perf/metrics/use --set <Value>
8.41.2.3. Monitor (special)¶
Disk Resource
clpcfadm.py mod -t monitor/sdw@sdw1/parameters/object --set <Disk Resource>
Note
You can specify only a disk resource.
8.41.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/sdw@sdw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/sdw@sdw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/sdw@sdw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/sdw@sdw1/emergency/preaction/account --set <Exec User>
8.41.3. Deleting a disk TUR monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon sdw sdw1
8.42. Service monitor resource¶
Note
8.42.1. Adding a service monitor resource¶
Be sure to set the following items. For details, see "Setting service monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Service Name
Recovery target
Recovery target type
clpcfadm.py add mon servicew servicew1 clpcfadm.py mod -t monitor/servicew@servicew1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/servicew@servicew1/parameters/name --set <Service Name> clpcfadm.py mod -t monitor/servicew@servicew1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/servicew@servicew1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.42.2. Setting service monitor resource parameters¶
8.42.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/servicew@servicew1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.42.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/servicew@servicew1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/servicew@servicew1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/servicew@servicew1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 3 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/servicew@servicew1/firstmonwait --set <Value>
Monitoring Timing
Monitoring Timing
Value
Always
0
Active (default)
1
clpcfadm.py mod -t monitor/servicew@servicew1/polling/timing --set <Value>
Note
If "Monitoring Timing" is set to "Active", set "Target Resource (monitored when active)".
Important
If you change the setting for "Monitoring timing" to "Always", set "Target Resource" to blank ("").
clpcfadm.py mod -t monitor/servicew@servicew1/target --set ""
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/servicew@servicew1/target --set <Target Resource (monitored when active)>
Note
Set as above with "Monitoring Timing" set to "Active".
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/servicew@servicew1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/servicew@servicew1/perf/metrics/use --set <Value>
8.42.2.3. Monitor (special)¶
Service Name (Within 1023 bytes)
clpcfadm.py mod -t monitor/servicew@servicew1/parameters/name --set <Service Name>
8.42.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/servicew@servicew1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/servicew@servicew1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/servicew@servicew1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation (default)
1
Stop resource 79
16
Stop group 80
2
Stop the cluster service
3
Stop the cluster service and shutdown OS
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/servicew@servicew1/emergency/preaction/account --set <Exec User>
8.42.3. Deleting a service monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon servicew servicew1
8.43. SMTP monitor resource¶
Note
8.43.1. Adding an SMTP monitor resource¶
Be sure to set the following items. For details, see "Setting SMTP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon smtpw smtpw1 clpcfadm.py mod -t monitor/smtpw@smtpw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/smtpw@smtpw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/smtpw@smtpw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.43.2. Setting SMTP monitor resource parameters¶
8.43.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/smtpw@smtpw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.43.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/smtpw@smtpw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/smtpw@smtpw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 3 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/smtpw@smtpw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/smtpw@smtpw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/smtpw@smtpw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/smtpw@smtpw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/smtpw@smtpw1/perf/metrics/use --set <Value>
8.43.2.3. Monitor (special)¶
IP Address
Default: 127.0.0.1
clpcfadm.py mod -t monitor/smtpw@smtpw1/agentparam/ipaddress --set <IP Address>
Port Number
Default, 25 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/smtpw@smtpw1/agentparam/port --set <Value>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/smtpw@smtpw1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/smtpw@smtpw1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Authentication Method
Value
CRAM-MD5 (default)
LOGIN
clpcfadm.py mod -t monitor/smtpw@smtpw1/agentparam/certificate --set <Value>
E-mail Address (Within 255 bytes)
clpcfadm.py mod -t monitor/smtpw@smtpw1/agentparam/mailaddress --set <E-mail Address>
8.43.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/smtpw@smtpw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/smtpw@smtpw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/smtpw@smtpw1/emergency/preaction/account --set <Exec User>
8.43.3. Deleting an SMTP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon smtpw smtpw1
8.44. SQL Server monitor resource¶
Note
8.44.1. Adding an SQL Server monitor resource¶
Be sure to set the following items. For details, see "Setting SQL Server monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Database Name
Recovery target
Recovery target type
clpcfadm.py add mon sqlserverw sqlserverw1 clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/dbname --set <Database Name> clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.44.2. Setting SQL Server monitor resource parameters¶
8.44.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.44.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/perf/metrics/use --set <Value>
8.44.2.3. Monitor (special)¶
Monitor Level
Monitor Level
Value
Level 0 (database status)
2
Level 1 (monitoring by select)
3
Level 2 (monitoring by update/select) (default)
0
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/docreatedrop --set <Value>
Database Name (Within 255 bytes)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/dbname --set <Database Name>
Instance Name (Within 255 bytes)
Default: MSSQLSERVER
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/instance --set <Instance Name>
User Name (Within 255 bytes)
Default: SA
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/username --set <User Name>
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Monitor Table Name (Within 255 bytes)
Default: SQLWATCH
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/tablename --set <Monitor Table Name>
ODBC Driver Name (Within 255 bytes)
ODBC Driver Name
SQL Server Native Client 11.0
ODBC Driver 13 for SQL Server (default)
ODBC Driver 17 for SQL Server
SQL Server
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/agentparam/odbcname --set <ODBC Driver Name>
8.44.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
Final ActionValueNo operation
1
Stop resource 83
16
Stop group 84
2
Stop the cluster service
3
Stop the cluster service and shutdown OS (default)
4
Stop the cluster service and reboot OS
5
Generate an intentional stop error
6
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/action --set <Value>
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/sqlserverw@sqlserverw1/emergency/preaction/account --set <Exec User>
8.44.3. Deleting an SQL Server monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon sqlserverw sqlserverw1
8.45. System monitor resource¶
Note
8.45.1. Adding a system monitor resource¶
Be sure to set the following items. For details, see "Setting system monitor resource parameters".
Item (mandatory)
Monitor resource name
Recovery target
Recovery target type
clpcfadm.py add mon sraw sraw1 clpcfadm.py mod -t monitor/sraw@sraw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.45.2. Setting system monitor resource parameters¶
8.45.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/sraw@sraw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.45.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/sraw@sraw1/polling/interval --set <Value>
Timeout (sec)
Default, 60 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/sraw@sraw1/polling/timeout --set <Value>
Retry Count
Default, 0 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/sraw@sraw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/sraw@sraw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/sraw@sraw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/sraw@sraw1/perf/metrics/use --set <Value>
8.45.2.3. Monitor (special)¶
Monitoring CPU usage
Monitoring CPU usage
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/cpu/docheck --set <Value>
CPU usage (%)
Default, 90 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/cpu/rate --set <Value>
Note
Set as above with "Monitoring CPU usage" set to "Monitor".
Duration Time (sec)
Default, 3600 (minimum, 60; maximum, 86400)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/cpu/time --set <Value>
Note
Set as above with "Monitoring CPU usage" set to "Monitor".
Note
Specify a value in seconds (divisible by 60).
Monitoring total usage of memory
Monitoring total usage of memory
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/memory/docheck --set <Value>
Total usage of memory (%)
Default, 90 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/memory/rate --set <Value>
Note
Set as above with "Monitoring total usage of memory" set to "Monitor".
Duration Time (sec)
Default, 3600 (minimum, 60; maximum, 86400)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/memory/time --set <Value>
Note
Set as above with "Monitoring total usage of memory" set to "Monitor".
Note
Specify a value in seconds (divisible by 60).
Monitoring total usage of virtual memory
Monitoring total usage of virtual memory
Value
Monitor (default)
1
Do not monitor
0
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/swap/docheck --set <Value>
Total usage of memory (%)
Default, 90 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/swap/rate --set <Value>
Note
Set as above with "Monitoring total usage of virtual memory" set to "Monitor".
Duration Time (sec)
Default, 3600 (minimum, 60; maximum, 86400)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/system/swap/time --set <Value>
Note
Set as above with "Monitoring total usage of virtual memory" set to "Monitor".
Note
Specify a value in seconds (divisible by 60).
-
Condition of detecting failure -
Add clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/mountpoint --set <Logical Drive> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/docheck_rate --set <Utilization rate> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/warning_rate --set <(Utilization rate) Warning level> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/notice_rate --set <(Utilization rate) Notice level> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/rate_time --set <(Utilization rate) Duration Time> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/docheck_size --set <Free space> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/warning_size --set <(Free space) Warning level> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/notice_size --set <(Free space) Notice level> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/size_time --set <(Free space) Duration Time> --nocheck
Note
With only one condition of detecting failure, specify 0 for ID.With more than one condition of detecting failure, specify consecutive numbers (e.g., 0, 1, 2...).Logical Drive
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/mountpoint --set <Drive letter> --nocheck
-
Monitor Type Utilization rate
Utilization rate
Value
Set (default)
1
Do not set
0
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/docheck_rate --set <Value> --nocheck
Note
To set the following items, set "Utilization rate" to "Set" in advance.
Warning level (%)
Default, 90 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/warning_rate --set <Value> --nocheck
Note
Set the warning level to a value equal to or greater than the notice level value.
Notice level (%)
Default, 80 (minimum, 1; maximum, 100)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/notice_rate --set <Value> --nocheck
Duration Time (sec)
Default, 86400 (minimum, 60; maximum, 2592000)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/rate_time --set <Value> --nocheck
Note
Specify a value in seconds (divisible by 60).
Free space
Free space
Value
Set (default)
1
Do not set
0
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/docheck_size --set <Value> --nocheck
Note
To set the following items, set "Free space" to "Set" in advance.
Warning level (MB)
Default, 500 (minimum, 1; maximum, 4294967295)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/warning_size --set <Value> --nocheck
Note
Set the warning level to a value equal to or less than the notice level value.
Notice level (MB)
Default, 1000 (minimum, 1; maximum, 4294967295)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/notice_size --set <Value> --nocheck
Duration Time (sec)
Default, 86400 (minimum, 60; maximum, 2592000)
clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID>/size_time --set <Value> --nocheck
Note
Specify a value in seconds (divisible by 60).
-
Delete clpcfadm.py mod -t monitor/sraw@sraw1/parameters/diskcap@<ID> --delete
-
8.45.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/sraw@sraw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/sraw@sraw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/sraw@sraw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/sraw@sraw1/emergency/preaction/account --set <Exec User>
8.45.3. Deleting a system monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon sraw sraw1
8.46. Tuxedo monitor resource¶
Note
8.46.1. Adding a Tuxedo monitor resource¶
Be sure to set the following items. For details, see "Setting Tuxedo monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Config File
Recovery target
Recovery target type
clpcfadm.py add mon tuxw tuxw1 clpcfadm.py mod -t monitor/tuxw@tuxw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/tuxw@tuxw1/parameters/tuxconfig --set <Config File> --nocheck clpcfadm.py mod -t monitor/tuxw@tuxw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/tuxw@tuxw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.46.2. Setting Tuxedo monitor resource parameters¶
8.46.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/tuxw@tuxw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.46.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/tuxw@tuxw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/tuxw@tuxw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/tuxw@tuxw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/tuxw@tuxw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/tuxw@tuxw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/tuxw@tuxw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/tuxw@tuxw1/perf/metrics/use --set <Value>
8.46.2.3. Monitor (special)¶
Application Server Name (Within 255 bytes)
Default: BBL
clpcfadm.py mod -t monitor/tuxw@tuxw1/parameters/servername --set <Application Server Name>
Config File (Within 1023 bytes)
clpcfadm.py mod -t monitor/tuxw@tuxw1/parameters/tuxconfig --set <Config File> --nocheck
8.46.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/tuxw@tuxw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/tuxw@tuxw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/tuxw@tuxw1/emergency/preaction/account --set <Exec User>
8.46.3. Deleting a Tuxedo monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon tuxw tuxw1
8.47. User mode monitor resource¶
Note
8.47.1. Adding a user mode monitor resource¶
Be sure to set the following items. For details, see "Setting user mode monitor resource parameters".
Item (mandatory)
Monitor resource name
Recovery target (LocalServer)
Recovery target type (cls)
clpcfadm.py add mon userw userw1 clpcfadm.py mod -t monitor/userw@userw1/relation/name --set LocalServer --nocheck clpcfadm.py mod -t monitor/userw@userw1/relation/type --set cls --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.47.2. Setting user mode monitor resource parameters¶
8.47.2.1. Information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/userw@userw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.47.2.2. Monitor (common)¶
Interval (sec)
Default, 30 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/userw@userw1/polling/interval --set <Value>
Timeout (sec)
Default, 300 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/userw@userw1/polling/timeout --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/userw@userw1/firstmonwait --set <Value>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/userw@userw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/userw@userw1/perf/metrics/use --set <Value>
8.47.2.3. Monitor (special)¶
Method
Value
keepalive (default)
clpcfadm.py mod -t monitor/userw@userw1/parameters/method --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
No operation
0
Reset the hardware
1
Generate an intentional stop error (default)
2
clpcfadm.py mod -t monitor/userw@userw1/parameters/stallaction --set <Value>
Create Temporary Thread
Create Temporary Thread
Value
Set (default)
1
Do not set
0
clpcfadm.py mod -t monitor/userw@userw1/parameters/mkthread --set <Value>
8.47.2.4. Recovery Action¶
This cannot be set for this monitor resource.
8.47.3. Deleting a user mode monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon userw userw1
8.48. Virtual computer name monitor resource¶
Note
8.48.1. Adding a virtual computer name monitor resource¶
Be sure to set the following items. For details, see "Setting virtual computer name monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon vcomw vcomw1 clpcfadm.py mod -t monitor/vcomw@vcomw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/vcomw@vcomw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/vcomw@vcomw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.48.2. Setting virtual computer name monitor resource parameters¶
8.48.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/vcomw@vcomw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.48.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/vcomw@vcomw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/vcomw@vcomw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/vcomw@vcomw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/vcomw@vcomw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/vcomw@vcomw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/vcomw@vcomw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/vcomw@vcomw1/perf/metrics/use --set <Value>
8.48.2.3. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/vcomw@vcomw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/vcomw@vcomw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/vcomw@vcomw1/emergency/preaction/account --set <Exec User>
8.48.3. Deleting a virtual computer name monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon vcomw vcomw1
8.49. Virtual IP monitor resource¶
Note
8.49.1. Adding a Virtual IP monitor resource¶
Be sure to set the following items. For details, see "Setting Virtual IP monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon vipw vipw1 clpcfadm.py mod -t monitor/vipw@vipw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/vipw@vipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/vipw@vipw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.49.2. Setting Virtual IP monitor resource parameters¶
8.49.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/vipw@vipw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.49.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/vipw@vipw1/polling/interval --set <Value>
Timeout (sec)
Default, 180 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/vipw@vipw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry
0
Do not retry (default)
1
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover
0
Do not recover (default)
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 1 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/vipw@vipw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/vipw@vipw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/vipw@vipw1/target --set <Target Resource (monitored when active)>
Note
You can specify only a Virtual IP resource for this monitor resource.
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/vipw@vipw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/vipw@vipw1/perf/metrics/use --set <Value>
8.49.2.3. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/vipw@vipw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/vipw@vipw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/vipw@vipw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 3 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/vipw@vipw1/emergency/preaction/account --set <Exec User>
8.49.3. Deleting a Virtual IP monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon vipw vipw1
8.50. WebSphere monitor resource¶
Note
8.50.1. Adding a WebSphere monitor resource¶
Be sure to set the following items. For details, see "Setting WebSphere monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
User Name
Recovery target
Recovery target type
clpcfadm.py add mon wasw wasw1 clpcfadm.py mod -t monitor/wasw@wasw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/wasw@wasw1/parameters/username --set <User Name> --nocheck clpcfadm.py mod -t monitor/wasw@wasw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/wasw@wasw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.50.2. Setting WebSphere monitor resource parameters¶
8.50.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/wasw@wasw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.50.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/wasw@wasw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/wasw@wasw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/wasw@wasw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/wasw@wasw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/wasw@wasw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/wasw@wasw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/wasw@wasw1/perf/metrics/use --set <Value>
8.50.2.3. Monitor (special)¶
Application Server Name (Within 255 bytes)
Default: server1
clpcfadm.py mod -t monitor/wasw@wasw1/parameters/server --set <Application Server Name>
Profile Name (Within 1023 bytes)
Default: default
clpcfadm.py mod -t monitor/wasw@wasw1/parameters/profile --set <Profile Name>
User Name (Within 255 bytes)
clpcfadm.py mod -t monitor/wasw@wasw1/parameters/username --set <User Name> --nocheck
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/wasw@wasw1/parameters/password --set <Encrypted password>
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".Install Path (Within 1023 bytes)
Install Path
C:Program FilesIBMWebSphereAppServer (default)
clpcfadm.py mod -t monitor/wasw@wasw1/parameters/installpath --set <Install Path>
8.50.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/wasw@wasw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/wasw@wasw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/wasw@wasw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/wasw@wasw1/emergency/preaction/account --set <Exec User>
8.50.3. Deleting a WebSphere monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon wasw wasw1
8.51. WebLogic monitor resource¶
Note
8.51.1. Adding a WebLogic monitor resource¶
Be sure to set the following items. For details, see "Setting WebLogic monitor resource parameters".
Item (mandatory)
Monitor resource name
Target Resource (monitored when active)
Recovery target
Recovery target type
clpcfadm.py add mon wlsw wlsw1 clpcfadm.py mod -t monitor/wlsw@wlsw1/target --set <Target Resource (monitored when active)> clpcfadm.py mod -t monitor/wlsw@wlsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/wlsw@wlsw1/relation/type --set <Recovery target type> --nocheckNote
If you configure a cluster only with the above mandatory items, other parameters are set to their default values.
8.51.2. Setting WebLogic monitor resource parameters¶
8.51.2.1. Basic information¶
Monitor resource name (Within 31 bytes)
This is set when the resource is added. To change the monitor resource name, delete the resource and set it again.
Comment (Within 127 bytes)
clpcfadm.py mod -t monitor/wlsw@wlsw1/comment --set <Comment>
Note
Enclose in double quotes a string including spaces (e.g., "Sample Comment").
8.51.2.2. Monitor (common)¶
Interval (sec)
Default, 60 (minimum, 1; maximum, 999)
clpcfadm.py mod -t monitor/wlsw@wlsw1/polling/interval --set <Value>
Timeout (sec)
Default, 120 (minimum, 5; maximum, 999)
clpcfadm.py mod -t monitor/wlsw@wlsw1/polling/timeout --set <Value>
Do Not Retry at Timeout Occurrence
Do Not Retry at Timeout Occurrence
Value
Retry (default)
0
Do not retry
1
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/timeout/notreconfirmation/use --set <Value>
Action at Timeout Occurrence
Action at Timeout Occurrence
Value
Recover (default)
0
Do not recover
1
Generate an intentional stop error
2
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/timeout/notrecovery/use --set <Value>
Note
Set as above with "Do Not Retry at Timeout Occurrence" set to "Do not retry".
Retry Count
Default, 2 (minimum, 0; maximum, 999)
clpcfadm.py mod -t monitor/wlsw@wlsw1/polling/reconfirmation --set <Value>
Wait Time to Start Monitoring (sec)
Default, 0 (minimum, 0; maximum, 9999)
clpcfadm.py mod -t monitor/wlsw@wlsw1/firstmonwait --set <Value>
Target Resource (monitored when active)
clpcfadm.py mod -t monitor/wlsw@wlsw1/target --set <Target Resource (monitored when active)>
Choose servers that execute monitoring
clpcfadm.py mod -t monitor/wlsw@wlsw1/polling/servers@<ID>/name --set <Server name> --nocheck
Note
With only one server to be monitored, specify 0 for ID.With more than one server to be monitored, specify consecutive numbers (e.g., 0, 1, 2...).Send polling time metrics
Send polling time metrics
Value
Send
1
Do not send (default)
0
clpcfadm.py mod -t monitor/wlsw@wlsw1/perf/metrics/use --set <Value>
8.51.2.3. Monitor (special)¶
IP Address
Default: 127.0.0.1
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/ipaddress --set <IP Address>
Port Number
Default, 7002 (minimum, 1; maximum, 65535)
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/port --set <Value>
Monitor Method
Monitor Method
Value
RESTful API (default)
3
WLST
2
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/checkmethod --set <Value>
Protocol
Protocol
Value
HTTP (default)
0
HTTPS
1
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/https --set <Value>
User Name (Within 255 bytes)
Default: weblogic
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/restusername --set <User Name>
Note
You can set this parameter with "Monitor Method" set to "RESTful API".
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/restpassword --set <Encrypted password>
Note
You can set this parameter with "Monitor Method" set to "RESTful API".
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
-
Account Shadow Note
To set the following items, set "Monitor Method" to "WLST" in advance.
Account Shadow
Account Shadow
Value
On
1
Off (default)
0
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/shadow --set <Value>
Config File (Within 1023 bytes)
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/configfile --set <Config File>
Note
Set as above with "Account Shadow" set to "On".
Key File (Within 1023 bytes)
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/keyfile --set <Key File>
Note
Set as above with "Account Shadow" set to "On".
User Name (Within 255 bytes)
Default: weblogic
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/username --set <User Name>
Note
Set as above with "Account Shadow" set to "Off".
Password (Within 255 bytes)
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/password --set <Encrypted password>
Note
Set as above with "Account Shadow" set to "Off".
Note
Set an encrypted password string.For details, see "Retrieving an encrypted password string".
-
Authority Method Note
To set the following items, set "Monitor Method" to "WLST" in advance.
Authority Method
Authority Method
Value
Not Use SSL
0
DemoTrust (default)
1
CustomTrust
2
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/authority --set <Value>
Key Store File (Within 1023 bytes)
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/keystorefile --set <Key Store File>
Note
Set as above with "Authority Method" set to "CustomTrust".
Install Path (Within 255 bytes)
Install Path
C:\Oracle\Middleware\Oracle_Home\wlserver (default)
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/installpath --set <Install Path>
Add command option (Within 1023 bytes)
Default: -Dwlst.offline.log=disable -Duser.language=en_US
clpcfadm.py mod -t monitor/wlsw@wlsw1/parameters/option --set <Add command option>
8.51.2.4. Recovery Action¶
Recovery target
Recovery target
Recovery target type
Local server
LocalServer
cls
All groups([All Groups])
""
grp
Failover group name
(Failover group name)
grp
Group resource name
(Group resource name)
rsc
clpcfadm.py mod -t monitor/wlsw@wlsw1/relation/name --set <Recovery target> --nocheck clpcfadm.py mod -t monitor/wlsw@wlsw1/relation/type --set <Recovery target type> --nocheck
Important
If you set "Recovery target" to "Local server"
Set "Maximum Reactivation Count" and "Maximum Failover Count" to 0 (times).
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/threshold/restart --set 0 clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/threshold/fo2 --set 0
If the current setting for "Final Action" is "Stop resource (16)" or "Stop Group (2)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/action --set 1
Important
If you set "Recovery target" to "All groups ([All Groups])"
Set "Maximum Reactivation Count" to 0 (times).
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/threshold/restart --set 0
If the current setting for "Final Action" is "Stop resource (16)", change it to "No operation (1)".
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/action --set 1
Recovery Script Execution Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/threshold/script --set <Value>
Execute Script before Reactivation
Execute Script before Reactivation
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/userestart --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Maximum Reactivation Count
Default, 0 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/threshold/restart --set <Value>
Execute Script before Failover
Execute Script before Failover
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/usefailover --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Failover Target Server
Failover Target Server
Value
Stable server (default)
1
Maximum priority server
0
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/mode --set <Value>
Maximum Failover Count
Default, 1 (minimum, 0; maximum, 99)
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/threshold/fo2 --set <Value>
Execute Script before Final Action
Execute Script before Final Action
Value
Check
1
Do not check (default)
0
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/use --set <Value>
Note
If "Execute" is set, specify the file. (See "Script Settings" -> "File".)
Final Action
-
Script Settings File type
Script file type
Value
Script created with this product (default)
1
User Application
0
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/default --set <Value>
Note
If you change the value of this parameter, also change that of "File".
File (Within 1023 bytes)
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/path --set <File> --nocheck
Note
If you specify "Script created with this product", specify preaction.bat.
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/path --set preaction.bat --nocheck
Timeout (sec)
Default, 5 (minimum, 1; maximum, 9999)
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/timeout --set <Value>
Exec User
clpcfadm.py mod -t monitor/wlsw@wlsw1/emergency/preaction/account --set <Exec User>
8.51.3. Deleting a WebLogic monitor resource¶
Delete a resource by specifying the monitor resource type and monitor resource name.
clpcfadm.py del mon wlsw wlsw1
9. Retrieving an encrypted password string¶
Authentication password
Reference
Retrieving an encrypted password string with Cluster WebUI/Cluster WebUI Offline
Other than the above
Retrieving an encrypted password string with the clpencrypt command
9.1. Retrieving an encrypted password string with Cluster WebUI/Cluster WebUI Offline¶
Retrieve an encrypted password string as follows:
Import any set of cluster configuration data through Cluster WebUI or Cluster WebUI Offline.
On Cluster WebUI or Cluster WebUI Offline, set relevant passwords.
Click Export, then save the cluster configuration data to any directory.
Extract the zip file that you saved above, and then open clp.conf with a text editor.
Check relevant path values.
Example: Cluster WebUI authentication
9.2. Retrieving an encrypted password string with the clpencrypt command¶
Retrieve an encrypted password string by executing the following command:
clpencrypt <password (plaintext)>
10. Notes and restrictions¶
For strings that can be entered for parameters, and for prohibited strings, see the corresponding chapters of "EXPRESSCLUSTER X Reference Guide"
When specifying a file (e.g., script file), place the file in the same path on each server.
- Example
Desired script file specified in the Recovery Action of a monitor resource
clpcfadm.py mod -t monitor/<Monitor resource type>@<Monitor resource name>/emergency/preaction/path --set <Desired script file>
The command execution examples provided in this guide may require escape characters, which depends on the shell that you execute.